community.network.ce_ip_interface – Manages L3 attributes for IPv4 and IPv6 interfaces on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 3.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_ip_interface.

Synopsis

  • Manages Layer 3 attributes for IPv4 and IPv6 interfaces on HUAWEI CloudEngine switches.

Parameters

Parameter

Comments

addr

string

IPv4 or IPv6 Address.

interface

string / required

Full name of interface, i.e. 40GE1/0/22, vlanif10.

ipv4_type

string

Specifies an address type. The value is an enumerated type. main, primary IP address. sub, secondary IP address.

Choices:

  • main ← (default)

  • sub

mask

string

Subnet mask for IPv4 or IPv6 Address in decimal format.

state

string

Specify desired state of the resource.

Choices:

  • present ← (default)

  • absent

version

string

IP address version.

Choices:

  • v4 ← (default)

  • v6

Notes

Note

  • Interface must already be a L3 port when using this module.

  • Logical interfaces (loopback, vlanif) must be created first.

  • mask must be inserted in decimal format (i.e. 24) for both IPv6 and IPv4.

  • A single interface can have multiple IPv6 configured.

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

Examples

- name: Ip_interface module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:
  - name: Ensure ipv4 address is configured on 10GE1/0/22
    community.network.ce_ip_interface:
      interface: 10GE1/0/22
      version: v4
      state: present
      addr: 20.20.20.20
      mask: 24
      provider: '{{ cli }}'

  - name: Ensure ipv4 secondary address is configured on 10GE1/0/22
    community.network.ce_ip_interface:
      interface: 10GE1/0/22
      version: v4
      state: present
      addr: 30.30.30.30
      mask: 24
      ipv4_type: sub
      provider: '{{ cli }}'

  - name: Ensure ipv6 is enabled on 10GE1/0/22
    community.network.ce_ip_interface:
      interface: 10GE1/0/22
      version: v6
      state: present
      provider: '{{ cli }}'

  - name: Ensure ipv6 address is configured on 10GE1/0/22
    community.network.ce_ip_interface:
      interface: 10GE1/0/22
      version: v6
      state: present
      addr: 2001::db8:800:200c:cccb
      mask: 64
      provider: '{{ cli }}'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: true

end_state

dictionary

k/v pairs of IP attributes after module execution

Returned: always

Sample: {“interface”: “10GE1/0/22”, “ipv4”: [{“addrType”: “main”, “ifIpAddr”: “20.20.20.20”, “subnetMask”: “255.255.255.0”}]}

existing

dictionary

k/v pairs of existing IP attributes on the interface

Returned: always

Sample: {“interface”: “10GE1/0/22”, “ipv4”: [{“addrType”: “main”, “ifIpAddr”: “11.11.11.11”, “subnetMask”: “255.255.0.0”}]}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: always

Sample: {“addr”: “20.20.20.20”, “interface”: “10GE1/0/22”, “mask”: “24”}

updates

list / elements=string

commands sent to the device

Returned: always

Sample: [“interface 10GE1/0/22”, “ip address 20.20.20.20 24”]

Authors

  • QijunPan (@QijunPan)