community.network.slxos_l2_interface – Manage Layer-2 interface on Extreme Networks SLX-OS devices.
Note
This plugin is part of the community.network collection (version 3.0.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install community.network
.
To use it in a playbook, specify: community.network.slxos_l2_interface
.
Synopsis
This module provides declarative management of Layer-2 interface on Extreme slxos devices.
Parameters
Parameter |
Comments |
---|---|
Configure given VLAN in access port. If |
|
List of Layer-2 interface definitions. |
|
Mode in which interface needs to be configured. Choices:
|
|
Full name of the interface excluding any logical unit number, i.e. Ethernet 0/1. |
|
Native VLAN to be configured in trunk port. If |
|
Manage the state of the Layer-2 Interface configuration. Choices:
|
|
List of allowed VLANs in a given trunk port. If |
|
List of VLANs to be configured in trunk port. If |
Examples
- name: Ensure Ethernet 0/5 is in its default l2 interface state
community.network.slxos_l2_interface:
name: Ethernet 0/5
state: unconfigured
- name: Ensure Ethernet 0/5 is configured for access vlan 20
community.network.slxos_l2_interface:
name: Ethernet 0/5
mode: access
access_vlan: 20
- name: Ensure Ethernet 0/5 only has vlans 5-10 as trunk vlans
community.network.slxos_l2_interface:
name: Ethernet 0/5
mode: trunk
native_vlan: 10
trunk_vlans: 5-10
- name: Ensure Ethernet 0/5 is a trunk port and ensure 2-50 are being tagged (doesn't mean others aren't also being tagged)
community.network.slxos_l2_interface:
name: Ethernet 0/5
mode: trunk
native_vlan: 10
trunk_vlans: 2-50
- name: Ensure these VLANs are not being tagged on the trunk
community.network.slxos_l2_interface:
name: Ethernet 0/5
mode: trunk
trunk_vlans: 51-4094
state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The list of configuration mode commands to send to the device Returned: always, except for the platforms that use Netconf transport to manage the device. Sample: [“interface Ethernet 0/5”, “switchport access vlan 20”] |
Authors
Matthew Stone (@bigmstone)