dellemc.enterprise_sonic.sonic_l2_interfaces – Configure interface-to-VLAN association that is based on access or trunk mode

Note

This plugin is part of the dellemc.enterprise_sonic collection (version 1.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic.

To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_l2_interfaces.

New in version 1.0.0: of dellemc.enterprise_sonic

Synopsis

  • Manages Layer 2 interface attributes of Enterprise SONiC Distribution by Dell Technologies.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of Layer 2 interface configurations.

access

dictionary

Configures access mode characteristics of the interface.

vlan

integer

Configures the specified VLAN in access mode.

name

string / required

Full name of the interface, for example, ‘Eth1/26’.

trunk

dictionary

Configures trunking parameters on an interface.

allowed_vlans

list / elements=dictionary

Specifies list of allowed VLANs of trunk mode on the interface.

vlan

integer

Configures the specified VLAN in trunk mode.

state

string

The state that the configuration should be left in.

Choices:

  • merged ← (default)

  • deleted

Notes

Note

  • Tested against Enterprise SONiC Distribution by Dell Technologies.

  • Supports check_mode.

Examples

# Using deleted
#
# Before state:
# -------------
#
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#10         Inactive    A  Eth1/3
#11         Inactive    T  Eth1/3
#12         Inactive    A  Eth1/4
#13         Inactive    T  Eth1/4
#14         Inactive    A  Eth1/5
#15         Inactive    T  Eth1/5
#
- name: Configures switch port of interfaces
  dellemc.enterprise_sonic.sonic_l2_interfaces:
   config:
     - name: Eth1/3
     - name: Eth1/4
   state: deleted
#
# After state:
# ------------
#
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#10         Inactive
#11         Inactive
#12         Inactive
#13         Inactive
#14         Inactive    A  Eth1/5
#15         Inactive    T  Eth1/5
#
#
# Using deleted
#
# Before state:
# -------------
#
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#10         Inactive    A  Eth1/3
#11         Inactive    T  Eth1/3
#12         Inactive    A  Eth1/4
#13         Inactive    T  Eth1/4
#14         Inactive    A  Eth1/5
#15         Inactive    T  Eth1/5
#
- name: Configures switch port of interfaces
  dellemc.enterprise_sonic.sonic_l2_interfaces:
    config:
    state: deleted
#
# After state:
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#10         Inactive
#11         Inactive
#12         Inactive
#13         Inactive
#14         Inactive
#15         Inactive
#
#
# Using merged
#
# Before state:
# -------------
#
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#11         Inactive    T  Eth1/7
#12         Inactive    T  Eth1/7
#
- name: Configures switch port of interfaces
  dellemc.enterprise_sonic.sonic_l2_interfaces:
    config:
     - name: Eth1/3
       access:
         vlan: 10
    state: merged
#
# After state:
# ------------
#
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#10         Inactive    A  Eth1/3
#11         Inactive    T  Eth1/7
#12         Inactive    T  Eth1/7
#
#
# Using merged
#
# Before state:
# -------------
#
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#10         Inactive    A  Eth1/3
#
- name: Configures switch port of interfaces
  dellemc.enterprise_sonic.sonic_l2_interfaces:
    config:
     - name: Eth1/3
       trunk:
         allowed_vlans:
            - vlan: 11
            - vlan: 12
    state: merged
#
# After state:
# ------------
#
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#10         Inactive    A  Eth1/3
#11         Inactive    T  Eth1/7
#12         Inactive    T  Eth1/7
#
#
# Using merged
#
# Before state:
# -------------
#
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#10         Inactive
#11         Inactive
#12         Inactive    A  Eth1/4
#13         Inactive    T  Eth1/4
#14         Inactive    A  Eth1/5
#15         Inactive    T  Eth1/5
#
- name: Configures switch port of interfaces
  dellemc.enterprise_sonic.sonic_l2_interfaces:
    config:
     - name: Eth1/3
       access:
         vlan: 12
       trunk:
         allowed_vlans:
            - vlan: 13
            - vlan: 14
    state: merged
#
# After state:
# ------------
#
#do show Vlan
#Q: A - Access (Untagged), T - Tagged
#NUM        Status      Q Ports
#10         Inactive
#11         Inactive
#12         Inactive    A  Eth1/3
#                       A  Eth1/4
#13         Inactive    T  Eth1/3
#                       T  Eth1/4
#14         Inactive    A  Eth1/3
#                       A  Eth1/5
#15         Inactive    T  Eth1/5
#
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The resulting configuration model invocation.

Returned: when changed

Sample: “The configuration returned is always in the same format of the parameters above.\n”

before

list / elements=string

The configuration prior to the model invocation.

Returned: always

Sample: “The configuration returned always in the same format\n of the parameters above.\n”

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: [“command 1”, “command 2”, “command 3”]

Authors

  • Niraimadaiselvam M(@niraimadaiselvamm)