dellemc.enterprise_sonic.sonic_l3_interfaces – Configure the IPv4 and IPv6 parameters on Interfaces such as, Eth, LAG, VLAN, and loopback
Note
This plugin is part of the dellemc.enterprise_sonic collection (version 1.1.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic
.
To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_l3_interfaces
.
New in version 1.0.0: of dellemc.enterprise_sonic
Synopsis
Configures Layer 3 interface settings on devices running Enterprise SONiC Distribution by Dell Technologies. This module provides configuration management of IPv4 and IPv6 parameters on Ethernet interfaces of devices running Enterprise SONiC.
Note
This module has a corresponding action plugin.
Parameters
Parameter |
Comments |
---|---|
A list of l3_interfaces configurations. |
|
ipv4 configurations to be set for the Layer 3 interface mentioned in name option. |
|
List of IPv4 addresses to be set. |
|
IPv4 address to be set in the format <ipv4 address>/<mask> for example, 192.0.2.1/24. |
|
secondary flag of the ip address. Choices:
Default: “False” |
|
List of IPv4 addresses to be set for anycast. |
|
ipv6 configurations to be set for the Layer 3 interface mentioned in name option. |
|
List of IPv6 addresses to be set. |
|
IPv6 address to be set in the address format is <ipv6 address>/<mask> for example, 2001:db8:2201:1::1/64. |
|
enabled flag of the ipv6. Choices:
|
|
Full name of the interface, for example, Eth1/3. |
|
The state that the configuration should be left in. Choices:
|
Examples
# Using deleted
#
# Before state:
# -------------
#
#rno-dctor-1ar01c01sw02# show running-configuration interface
#!
#interface Ethernet20
# mtu 9100
# speed 100000
# shutdown
# ip address 83.1.1.1/16
# ip address 84.1.1.1/16 secondary
# ipv6 address 83::1/16
# ipv6 address 84::1/16
# ipv6 enable
#!
#interface Ethernet24
# mtu 9100
# speed 100000
# shutdown
# ip address 91.1.1.1/16
# ip address 92.1.1.1/16 secondary
# ipv6 address 90::1/16
# ipv6 address 91::1/16
# ipv6 address 92::1/16
# ipv6 address 93::1/16
#!
#interface Vlan501
# ip anycast-address 11.12.13.14/12
# ip anycast-address 1.2.3.4/22
#!
#
#
- name: delete one l3 interface.
dellemc.enterprise_sonic.sonic_l3_interfaces:
config:
- name: Ethernet20
ipv4:
addresses:
- address: 83.1.1.1/16
- address: 84.1.1.1/16
- name: Ethernet24
ipv6:
enabled: true
addresses:
- address: 91::1/16
- name: Vlan501
ipv4:
anycast_addresses:
- 11.12.13.14/12
state: deleted
# After state:
# ------------
#
#rno-dctor-1ar01c01sw02# show running-configuration interface
#!
#interface Ethernet20
# mtu 9100
# speed 100000
# shutdown
# ipv6 address 83::1/16
# ipv6 address 84::1/16
# ipv6 enable
#!
#interface Ethernet24
# mtu 9100
# speed 100000
# shutdown
# ip address 91.1.1.1/16
# ip address 92.1.1.1/16 secondary
# ipv6 address 90::1/16
# ipv6 address 92::1/16
# ipv6 address 93::1/16
#!
#interface Vlan501
# ip anycast-address 1.2.3.4/22
#!
#
# Using deleted
#
# Before state:
# -------------
#
#rno-dctor-1ar01c01sw02# show running-configuration interface
#!
#interface Ethernet20
# mtu 9100
# speed 100000
# shutdown
# ip address 83.1.1.1/16
# ip address 84.1.1.1/16 secondary
# ipv6 address 83::1/16
# ipv6 address 84::1/16
# ipv6 enable
#!
#interface Ethernet24
# mtu 9100
# speed 100000
# shutdown
# ip address 91.1.1.1/16
# ipv6 address 90::1/16
# ipv6 address 91::1/16
# ipv6 address 92::1/16
# ipv6 address 93::1/16
#!
#interface Vlan501
# ip anycast-address 11.12.13.14/12
# ip anycast-address 1.2.3.4/22
#!
#
#
- name: delete all l3 interface
dellemc.enterprise_sonic.sonic_l3_interfaces:
config:
state: deleted
#
# After state:
# ------------
#
#rno-dctor-1ar01c01sw02# show running-configuration interface
#!
#interface Ethernet20
# mtu 9100
# speed 100000
# shutdown
#!
#interface Ethernet24
# mtu 9100
# speed 100000
# shutdown
#!
#interface Vlan501
#!
#
# Using merged
#
# Before state:
# -------------
#
#rno-dctor-1ar01c01sw02# show running-configuration interface
#!
#interface Ethernet20
# mtu 9100
# speed 100000
# shutdown
#!
#interface Ethernet24
# mtu 9100
# speed 100000
# shutdown
#!
#interface Vlan501
# ip anycast-address 1.2.3.4/22
#!
#
- name: Add l3 interface configurations
dellemc.enterprise_sonic.sonic_l3_interfaces:
config:
- name: Ethernet20
ipv4:
addresses:
- address: 83.1.1.1/16
- address: 84.1.1.1/16
secondary: True
ipv6:
enabled: true
addresses:
- address: 83::1/16
- address: 84::1/16
secondary: True
- name: Ethernet24
ipv4:
addresses:
- address: 91.1.1.1/16
ipv6:
addresses:
- address: 90::1/16
- address: 91::1/16
- address: 92::1/16
- address: 93::1/16
- name: Vlan501
ipv4:
anycast_addresses:
- 11.12.13.14/12
state: merged
#
# After state:
# ------------
#
#rno-dctor-1ar01c01sw02# show running-configuration interface
#!
#interface Ethernet20
# mtu 9100
# speed 100000
# shutdown
# ip address 83.1.1.1/16
# ip address 84.1.1.1/16 secondary
# ipv6 address 83::1/16
# ipv6 address 84::1/16
# ipv6 enable
#!
#interface Ethernet24
# mtu 9100
# speed 100000
# shutdown
# ip address 91.1.1.1/16
# ipv6 address 90::1/16
# ipv6 address 91::1/16
# ipv6 address 92::1/16
# ipv6 address 93::1/16
#!
#interface Vlan501
# ip anycast-address 1.2.3.4/22
# ip anycast-address 11.12.13.14/12
#!
#
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The resulting configuration model invocation. Returned: when changed Sample: “The configuration returned is always in the same format of the parameters above.\n” |
|
The configuration prior to the model invocation. Returned: always Sample: “The configuration returned is always in the same format of the parameters above.\n” |
|
The set of commands pushed to the remote device. Returned: always Sample: [“command 1”, “command 2”, “command 3”] |
Authors
Kumaraguru Narayanan (@nkumaraguru)