You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.iosxr.iosxr_l3_interfaces module – L3 interfaces resource module

Note

This module is part of the cisco.iosxr collection (version 2.9.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_l3_interfaces.

New in version 1.0.0: of cisco.iosxr

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis 

This module provides declarative management of Layer-3 interface on Cisco IOS-XR devices.

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of Layer-3 interface options
ipv4 list / elements=dictionary	IPv4 address to be set for the Layer-3 interface mentioned in name option. The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24
address string	Configures the IPv4 address for Interface.
secondary boolean	Configures the IP address as a secondary address. Choices: no yes
ipv6 list / elements=dictionary	IPv6 address to be set for the Layer-3 interface mentioned in name option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64
address string	Configures the IPv6 address for Interface.
name string / required	Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config interface. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state of the configuration after module completion Choices: merged ← (default) replaced overridden deleted parsed rendered gathered

Notes 

Note

This module works with connection network_cli. See the IOS-XR Platform Options.

Examples 

# Using merged

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

- name: Merge provided configuration with device configuration
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
      ipv4:
      - address: 192.168.0.1/24
    - name: GigabitEthernet0/0/0/3
      ipv4:
      - address: 192.168.2.1/24
        secondary: true
    state: merged

# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.0.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.1.0 255.255.255.0
#  ipv4 address 192.168.2.1 255.255.255.0 secondary
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

# Using overridden

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.0.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.1.0 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

- name: Override device configuration of all interfaces with provided configuration
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    - name: GigabitEthernet0/0/0/3
      ipv4:
      - address: 192.168.0.1/24
    - name: GigabitEthernet0/0/0/3.700
      ipv4:
      - address: 192.168.0.2/24
      - address: 192.168.2.1/24
        secondary: true
    state: overridden

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.2 255.255.255.0
#  ipv4 address 192.168.2.1 255.255.255.0 secondary
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
# !

# Using replaced

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.1 255.255.255.0
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

- name: Replaces device configuration of listed interfaces with provided configuration
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    - name: GigabitEthernet0/0/0/3
      ipv6:
      - address: fd5d:12c9:2201:1::1/64
    - name: GigabitEthernet0/0/0/4
      ipv4:
      - address: 192.168.0.2/24
    state: replaced

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.1 255.255.255.0
# !
# interface GigabitEthernet0/0/0/4
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !

# Using deleted

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  ipv4 address 192.168.2.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.3.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.1 255.255.255.0
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !

- name: "Delete L3 attributes of given interfaces (Note: This won't delete the interface itself)"
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    - name: GigabitEthernet0/0/0/3
    - name: GigabitEthernet0/0/0/4
    - name: GigabitEthernet0/0/0/3.700
    state: deleted

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  ipv4 address 192.168.2.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.3.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
# !

# Using Deleted without any config passed
# "(NOTE: This will delete all of configured resource module attributes from each configured interface)"

# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  ipv4 address 192.168.2.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  ipv4 address 192.168.3.1 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.168.0.2 255.255.255.0
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
#  ipv4 address 192.168.0.1 255.255.255.0
# !
# interface GigabitEthernet0/0/0/4
#  ipv6 address fd5d:12c9:2201:1::1/64
#  shutdown
# !


- name: "Delete L3 attributes of all interfaces (Note: This won't delete the interface itself)"
  cisco.iosxr.iosxr_l3_interfaces:
    state: deleted

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/3.700
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
# !


# Using parsed
# parsed.cfg
# ------------
#
# nterface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  ipv4 address 192.0.2.1 255.255.255.0
#  ipv4 address 192.0.2.2 255.255.255.0 secondary
#  ipv6 address 2001:db8:0:3::/64
#  duplex half
# !
# interface GigabitEthernet0/0/0/1
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  speed 100
#  duplex full
#  dot1q native vlan 10
#  l2transport
#   l2protocol cdp forward
#   l2protocol pvst tunnel
#   propagate remote-status
#  !
# !
# interface GigabitEthernet0/0/0/3
#  ipv4 address 192.0.22.1 255.255.255.0
#  ipv4 address 192.0.23.1 255.255.255.0
# !
# - name: Convert L3 interfaces config to argspec without connecting to the appliance
#   cisco.iosxr.iosxr_l3_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.2.1 255.255.255.0"
#                 },
#                 {
#                     "address": "192.0.2.2 255.255.255.0",
#                     "secondary": true
#                 }
#             ],
#             "ipv6": [
#                 {
#                     "address": "2001:db8:0:3::/64"
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0"
#         },
#         {
#             "name": "GigabitEthernet0/0/0/1"
#         },
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.22.1 255.255.255.0"
#                 },
#                 {
#                     "address": "192.0.23.1 255.255.255.0"
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/3"
#         }
#     ]


# Using rendered
- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_l3_interfaces:
    config:

    - name: GigabitEthernet0/0/0/0
      ipv4:

      - address: 198.51.100.1/24

    - name: GigabitEthernet0/0/0/1
      ipv6:

      - address: 2001:db8:0:3::/64
      ipv4:

      - address: 192.0.2.1/24

      - address: 192.0.2.2/24
        secondary: true
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": [
#         "interface GigabitEthernet0/0/0/0",
#         "ipv4 address 198.51.100.1 255.255.255.0",
#         "interface GigabitEthernet0/0/0/1",
#         "ipv4 address 192.0.2.2 255.255.255.0 secondary",
#         "ipv4 address 192.0.2.1 255.255.255.0",
#         "ipv6 address 2001:db8:0:3::/64"
#     ]
# Using gathered
# Before state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config  interface
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  ipv4 address 192.0.2.1 255.255.255.0
#  ipv4 address 192.0.2.2 255.255.255.0 secondary
#  ipv6 address 2001:db8:0:3::/64
#  duplex half
# !
# interface GigabitEthernet0/0/0/1
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  speed 100
#  duplex full
#  dot1q native vlan 10
#  l2transport
#   l2protocol cdp forward
#   l2protocol pvst tunnel
#   propagate remote-status
#  !
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
#  dot1q native vlan 40
# !
- name: Gather IOSXR l3 interfaces as in given arguments
  cisco.iosxr.iosxr_l3_interfaces:
    config:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "name": "Loopback888"
#         },
#         {
#             "ipv4": [
#                 {
#                     "address": "192.0.2.1 255.255.255.0"
#                 },
#                 {
#                     "address": "192.0.2.2 255.255.255.0",
#                     "secondary": true
#                 }
#             ],
#             "ipv6": [
#                 {
#                     "address": "2001:db8:0:3::/64"
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0"
#         },
#         {
#             "name": "GigabitEthernet0/0/0/1"
#         },
#         {
#             "name": "GigabitEthernet0/0/0/3"
#         },
#         {
#             "name": "GigabitEthernet0/0/0/4"
#         }
#     ]
# After state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config  interface
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  ipv4 address 192.0.2.1 255.255.255.0
#  ipv4 address 192.0.2.2 255.255.255.0 secondary
#  ipv6 address 2001:db8:0:3::/64
#  duplex half
# !
# interface GigabitEthernet0/0/0/1
#  description Configured and Merged by Ansible-Network
#  mtu 66
#  speed 100
#  duplex full
#  dot1q native vlan 10
#  l2transport
#   l2protocol cdp forward
#   l2protocol pvst tunnel
#   propagate remote-status
#  !
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
#  dot1q native vlan 40
# !

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The configuration as structured data after module completion. Returned: when changed Sample: “The configuration returned will always be in the same format of the parameters above.”
before list / elements=string	The configuration as structured data prior to module invocation. Returned: always Sample: “The configuration returned will always be in the same format of the parameters above.”
commands list / elements=string	The set of commands pushed to the remote device Returned: always Sample: [“interface GigabitEthernet0/0/0/1”, “ipv4 address 192.168.0.1 255.255.255.0”]

Authors

Sumit Jaiswal (@justjais)
Rohit Thakur (@rohitthakur2590)

Collection links

Issue Tracker Repository (Sources)

cisco.iosxr.iosxr_l3_interfaces module – L3 interfaces resource module

Synopsis

Parameters

Notes

Examples

Return Values