cisco.ios.ios_prefix_lists module – Resource module to configure prefix lists.

Note

This module is part of the cisco.ios collection (version 4.6.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_prefix_lists.

New in cisco.ios 2.2.0

Synopsis

  • This module configures and manages the attributes of prefix list on Cisco IOS.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of configurations for Prefix lists.

afi

string

The Address Family Indicator (AFI) for the prefix list.

Choices:

  • "ipv4"

  • "ipv6"

prefix_lists

list / elements=dictionary

List of Prefix-lists.

description

string

Prefix-list specific description

entries

list / elements=dictionary

Prefix-lists supported params.

action

string

Specify packets to be rejected or forwarded

Choices:

  • "deny"

  • "permit"

description

string

Prefix-list specific description

Description param at entries level is DEPRECATED

New Description is introduced at prefix_lists level, please use the Description param defined at prefix_lists level instead of Description param at entries level, as at this level description option will get removed in a future release.

ge

integer

Minimum prefix length to be matched

le

integer

Maximum prefix length to be matched

prefix

string

IPv4 prefix <network>/<length>, e.g., A.B.C.D/nn

IPv6 prefix <network>/<length>, e.g., X:X:X:X::X/<0-128>

sequence

integer

sequence number of an entry

name

string

Name of a prefix-list

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command sh bgp.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

The states merged is the default state which merges the want and have config, but for Prefix-List module as the IOS platform doesn’t allow update of Prefix-List over an pre-existing Prefix-List, same way Prefix-Lists resource module will error out for respective scenario and only addition of new Prefix-List over new sequence will be allowed with merge state.

The states rendered, gathered and parsed does not perform any change on the device.

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command sh running-config | section ^ip prefix-list|^ipv6 prefix-list executed on device. For state parsed active connection to remote host is not required.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Notes

Note

Examples

# Using deleted by Name

# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

- name: Delete provided Prefix lists config by Prefix name
  cisco.ios.ios_prefix_lists:
    config:
      - afi: ipv4
        prefix_lists:
          - name: 10
          - name: test_prefix
    state: deleted

#  Commands Fired:
#  ---------------
#
#  "commands": [
#         "no ip prefix-list 10",
#         "no ip prefix-list test_prefix"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

# Using deleted by AFI

# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

- name: Delete provided Prefix lists config by AFI
  cisco.ios.ios_prefix_lists:
    config:
      - afi: ipv4
    state: deleted

#  Commands Fired:
#  ---------------
#
#  "commands": [
#         "no ip prefix-list test",
#         "no ip prefix-list 10",
#         "no ip prefix-list test_prefix"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

# Using deleted without any config passed (NOTE: This will delete all Prefix lists configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

- name: Delete all Prefix lists config
  cisco.ios.ios_prefix_lists:
    state: deleted

# Commands Fired:
# ---------------
#
#  "commands": [
#         "no ip prefix-list test",
#         "no ip prefix-list 10",
#         "no ip prefix-list test_prefix",
#         "no ipv6 prefix-list test_ipv6"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# router-ios#

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ipv6 prefix-list test_ipv6 description this is ipv6
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

- name: Merge provided Prefix lists configuration
  cisco.ios.ios_prefix_lists:
    config:
      - afi: ipv6
        prefix_lists:
          - name: test_ipv6
            description: this is ipv6 merge test
            entries:
              - action: deny
                prefix: 2001:DB8:0:4::/64
                ge: 80
                le: 100
                sequence: 10
    state: merged

# After state:
# -------------
#
# Play Execution fails, with error:
# Cannot update existing sequence 10 of Prefix Lists test_ipv6 with state merged.
# Please use state replaced or overridden.

# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ipv6 prefix-list test_ipv6 description this is ipv6
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

- name: Merge provided Prefix lists configuration
  cisco.ios.ios_prefix_lists:
    config:
      - afi: ipv4
        prefix_lists:
          - name: 10
            description: this is new merge test
            entries:
              - action: deny
                prefix: 1.0.0.0/8
                le: 15
                sequence: 5
              - action: deny
                prefix: 35.0.0.0/8
                ge: 10
                sequence: 10
              - action: deny
                prefix: 12.0.0.0/8
                ge: 15
                sequence: 15
              - action: deny
                prefix: 14.0.0.0/8
                ge: 20
                le: 21
                sequence: 20
          - name: test
            description: this is merge test
            entries:
              - action: deny
                prefix: 12.0.0.0/8
                ge: 15
                sequence: 50
          - name: test_prefix
            description: this is for prefix-list
            entries:
              - action: deny
                prefix: 35.0.0.0/8
                ge: 10
                le: 15
                sequence: 5
              - action: deny
                prefix: 35.0.0.0/8
                ge: 20
                sequence: 10
      - afi: ipv6
        prefix_lists:
          - name: test_ipv6
            description: this is ipv6 merge test
            entries:
              - action: deny
                prefix: 2001:DB8:0:4::/64
                ge: 80
                le: 100
                sequence: 20
    state: merged

#  Commands Fired:
#  ---------------
#
#   "commands": [
#         "ip prefix-list test description this is merge test",
#         "ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15",
#         "ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15",
#         "ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10",
#         "ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15",
#         "ip prefix-list 10 description this is new merge test",
#         "ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21",
#         "ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20",
#         "ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15",
#         "ip prefix-list test_prefix description this is for prefix-list",
#         "ipv6 prefix-list test_ipv6 seq 20 deny 2001:DB8:0:4::/64 ge 80 le 100",
#         "ipv6 prefix-list test_ipv6 description this is ipv6 merge test"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is new merge test
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is merge test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 merge test
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

- name: Override provided Prefix lists configuration
  cisco.ios.ios_prefix_lists:
    config:
      - afi: ipv4
        prefix_lists:
          - name: 10
            description: this is override test
            entries:
              - action: deny
                prefix: 12.0.0.0/8
                ge: 15
                sequence: 15
              - action: deny
                prefix: 14.0.0.0/8
                ge: 20
                le: 21
                sequence: 20
          - name: test_override
            description: this is override test
            entries:
              - action: deny
                prefix: 35.0.0.0/8
                ge: 20
                sequence: 10
      - afi: ipv6
        prefix_lists:
          - name: test_ipv6
            description: this is ipv6 override test
            entries:
              - action: deny
                prefix: 2001:DB8:0:4::/64
                ge: 80
                le: 100
                sequence: 10
    state: overridden

# Commands Fired:
# ---------------
#
#  "commands": [
#         "no ip prefix-list test",
#         "no ip prefix-list test_prefix",
#         "ip prefix-list 10 description this is override test",
#         "no ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10",
#         "no ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15",
#         "ip prefix-list test_override seq 10 deny 35.0.0.0/8 ge 20",
#         "ip prefix-list test_override description this is override test",
#         "no ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80",
#         "ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100",
#         "ipv6 prefix-list test_ipv6 description this is ipv6 override test"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is override test
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test_override description this is override test
# ip prefix-list test_override seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 override test
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

- name: Replaced provided Prefix lists configuration
  cisco.ios.ios_prefix_lists:
    config:
      - afi: ipv4
        prefix_lists:
          - name: 10
            description: this is replace test
            entries:
              - action: deny
                prefix: 12.0.0.0/8
                ge: 15
                sequence: 15
              - action: deny
                prefix: 14.0.0.0/8
                ge: 20
                le: 21
                sequence: 20
          - name: test_replace
            description: this is replace test
            entries:
              - action: deny
                prefix: 35.0.0.0/8
                ge: 20
                sequence: 10
      - afi: ipv6
        prefix_lists:
          - name: test_ipv6
            description: this is ipv6 replace test
            entries:
              - action: deny
                prefix: 2001:DB8:0:4::/64
                ge: 80
                le: 100
                sequence: 10
    state: replaced

# Commands Fired:
# ---------------
#  "commands": [
#         "ip prefix-list 10 description this is replace test",
#         "no ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10",
#         "no ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15",
#         "ip prefix-list test_replace seq 10 deny 35.0.0.0/8 ge 20",
#         "ip prefix-list test_replace description this is replace test",
#         "no ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80",
#         "ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100",
#         "ipv6 prefix-list test_ipv6 description this is ipv6 replace test"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is replace test
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ip prefix-list test_replace description this is replace test
# ip prefix-list test_replace seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 replace test
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

- name: Gather Prefix lists provided configurations
  cisco.ios.ios_prefix_lists:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": [
#         {
#             "afi": "ipv4",
#             "prefix_lists": [
#                 {
#                     "description": "this is test description"
#                     "entries": [
#                         {
#                             "action": "deny",
#                             "le": 15,
#                             "prefix": "1.0.0.0/8",
#                             "sequence": 5
#                         },
#                         {
#                             "action": "deny",
#                             "ge": 10,
#                             "prefix": "35.0.0.0/8",
#                             "sequence": 10
#                         },
#                         {
#                             "action": "deny",
#                             "ge": 15,
#                             "prefix": "12.0.0.0/8",
#                             "sequence": 15
#                         },
#                         {
#                             "action": "deny",
#                             "ge": 20,
#                             "le": 21,
#                             "prefix": "14.0.0.0/8",
#                             "sequence": 20
#                         }
#                     ],
#                     "name": "10"
#                 },
#                 {
#                     "description": "this is test"
#                     "entries": [
#                         {
#                             "action": "deny",
#                             "ge": 15,
#                             "prefix": "12.0.0.0/8",
#                             "sequence": 50
#                         }
#                     ],
#                     "name": "test"
#                 },
#                 {
#                     "description": "this is for prefix-list"
#                     "entries": [
#                         {
#                             "action": "deny",
#                             "ge": 10,
#                             "le": 15,
#                             "prefix": "35.0.0.0/8",
#                             "sequence": 5
#                         },
#                         {
#                             "action": "deny",
#                             "ge": 20,
#                             "prefix": "35.0.0.0/8",
#                             "sequence": 10
#                         }
#                     ],
#                     "name": "test_prefix"
#                 }
#             ]
#         },
#         {
#             "afi": "ipv6",
#             "prefix_lists": [
#                 {
#                     "description": "this is ipv6 prefix-list"
#                     "entries": [
#                         {
#                             "action": "deny",
#                             "ge": 80,
#                             "prefix": "2001:DB8:0:4::/64",
#                             "sequence": 10
#                         }
#                     ],
#                     "name": "test_ipv6"
#                 }
#             ]
#         }
#     ]

# After state:
# ------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_prefix_lists:
    config:
      - afi: ipv4
        prefix_lists:
          - name: 10
            description: this is new merge test
            entries:
              - action: deny
                prefix: 1.0.0.0/8
                le: 15
                sequence: 5
              - action: deny
                prefix: 35.0.0.0/8
                ge: 10
                sequence: 10
              - action: deny
                prefix: 12.0.0.0/8
                ge: 15
                sequence: 15
              - action: deny
                prefix: 14.0.0.0/8
                ge: 20
                le: 21
                sequence: 20
          - name: test
            description: this is merge test
            entries:
              - action: deny
                prefix: 12.0.0.0/8
                ge: 15
                sequence: 50
          - name: test_prefix
            description: this is for prefix-list
            entries:
              - action: deny
                prefix: 35.0.0.0/8
                ge: 10
                le: 15
                sequence: 5
              - action: deny
                prefix: 35.0.0.0/8
                ge: 20
                sequence: 10
      - afi: ipv6
        prefix_lists:
          - name: test_ipv6
            description: this is ipv6 merge test
            entries:
              - action: deny
                prefix: 2001:DB8:0:4::/64
                ge: 80
                le: 100
                sequence: 10
    state: rendered

# Module Execution Result:
# ------------------------
#
#  "rendered": [
#         "ip prefix-list test description this is test",
#         "ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15",
#         "ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15",
#         "ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10",
#         "ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15",
#         "ip prefix-list 10 description this is test description",
#         "ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21",
#         "ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20",
#         "ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15",
#         "ip prefix-list test_prefix description this is for prefix-list",
#         "ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 l2 100",
#         "ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_prefix_lists:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#         {
#             "afi": "ipv4",
#             "prefix_lists": [
#                 {
#                     "description": "this is test description"
#                     "entries": [
#                         {
#                             "action": "deny",
#                             "le": 15,
#                             "prefix": "1.0.0.0/8",
#                             "sequence": 5
#                         },
#                         {
#                             "action": "deny",
#                             "ge": 10,
#                             "prefix": "35.0.0.0/8",
#                             "sequence": 10
#                         },
#                         {
#                             "action": "deny",
#                             "ge": 15,
#                             "prefix": "12.0.0.0/8",
#                             "sequence": 15
#                         },
#                         {
#                             "action": "deny",
#                             "ge": 20,
#                             "le": 21,
#                             "prefix": "14.0.0.0/8",
#                             "sequence": 20
#                         }
#                     ],
#                     "name": "10"
#                 },
#                 {
#                     "description": "this is test"
#                     "entries": [
#                         {
#                             "action": "deny",
#                             "ge": 15,
#                             "prefix": "12.0.0.0/8",
#                             "sequence": 50
#                         }
#                     ],
#                     "name": "test"
#                 },
#                 {
#                     "description": "this is for prefix-list"
#                     "entries": [
#                         {
#                             "action": "deny",
#                             "ge": 10,
#                             "le": 15,
#                             "prefix": "35.0.0.0/8",
#                             "sequence": 5
#                         },
#                         {
#                             "action": "deny",
#                             "ge": 20,
#                             "prefix": "35.0.0.0/8",
#                             "sequence": 10
#                         }
#                     ],
#                     "name": "test_prefix"
#                 }
#             ]
#         },
#         {
#             "afi": "ipv6",
#             "prefix_lists": [
#                 {
#                     "description": "this is ipv6 prefix-list"
#                     "entries": [
#                         {
#                             "action": "deny",
#                             "ge": 80,
#                             "prefix": "2001:DB8:0:4::/64",
#                             "sequence": 10
#                         }
#                     ],
#                     "name": "test_ipv6"
#                 }
#             ]
#         }
#     ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The resulting configuration model invocation.

Returned: when changed

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

before

list / elements=string

The configuration prior to the model invocation.

Returned: always

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["ip prefix-list 10 description this is test description", "ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15"]

Authors

  • Sumit Jaiswal (@justjais)