You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.ios.ios_route_maps module – Resource module to configure route maps.

Note

This module is part of the cisco.ios collection (version 4.6.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_route_maps.

New in cisco.ios 2.1.0

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis 

This module configures and manages the attributes of Route maps on Cisco IOS.

Note

This module has a corresponding action plugin.

Parameters 

Parameter	Comments
config list / elements=dictionary	A list of configurations for Route maps.
entries list / elements=dictionary	A list of configurations entries for Route maps.
action string	Route map set operations Choices: `"deny"` `"permit"`
continue_entry dictionary	Continue on a different entry within the route-map
entry_sequence integer	Route-map entry sequence number Please refer vendor documentation for valid values
set boolean	Set continue Choices: `false` `true`
description string	Route-map comment
match dictionary	Match values from routing table
additional_paths dictionary	BGP Add-Path match policie BGP Add-Path advertise-set policy
all boolean	BGP Add-Path advertise all paths Choices: `false` `true`
best integer	BGP Add-Path advertise best n paths (1-3)
best_range dictionary	BGP Add-Path advertise best paths (range m to n)
lower_limit integer	BGP Add-Path best paths to advertise (lower limit) (1-3)
upper_limit integer	BGP Add-Path best paths to advertise (upper limit) (1-3)
group_best boolean	BGP Add-Path advertise group-best path Choices: `false` `true`
as_path dictionary	Match BGP AS path list
acls list / elements=integer	AS path access-list Please refer vendor documentation for valid values
set boolean	Set AS path list Choices: `false` `true`
clns dictionary	CLNS information
address string	Match address of route or match packet
next_hop string	Match next-hop address of route
route_source string	Match advertising source address of route
community dictionary	Match BGP community list
exact_match boolean	Do exact matching of communities Choices: `false` `true`
name list / elements=string	Community-list number/Community-list name Please refer vendor documentation for valid values
extcommunity list / elements=string	Match BGP/VPN extended community list Extended community-list number Please refer vendor documentation for valid values
interfaces list / elements=string	Match first hop interface of route
ip dictionary	IP specific information
address dictionary	Match address of route or match packet
acls list / elements=string	Match entries of acl IP acl name/number Please refer vendor documentation for valid values
prefix_lists list / elements=string	Match entries of prefix-lists IP prefix-list name
flowspec dictionary	Match src/dest prefix component of flowspec prefix
acls list / elements=string	Match entries of acl IP acl name/number Please refer vendor documentation for valid values
dest_pfx boolean	Match dest prefix component of flowspec prefix Choices: `false` `true`
prefix_lists list / elements=string	Match entries of prefix-lists IP prefix-list name
src_pfx boolean	Match source prefix component of flowspec prefix Choices: `false` `true`
next_hop dictionary	Match next-hop address of route
acls list / elements=string	Match entries of acl IP acl name/number Please refer vendor documentation for valid values
prefix_lists list / elements=string	Match entries of prefix-lists IP prefix-list name
set boolean	Set next-hop address Choices: `false` `true`
redistribution_source dictionary	route redistribution source (EIGRP only)
acls list / elements=string	Match entries of acl IP acl name/number Please refer vendor documentation for valid values
prefix_lists list / elements=string	Match entries of prefix-lists IP prefix-list name
set boolean	Set redistribution-source Choices: `false` `true`
route_source dictionary	Match advertising source address of route
acls list / elements=string	Match entries of acl IP acl name/number Please refer vendor documentation for valid values
prefix_lists list / elements=string	Match entries of prefix-lists IP prefix-list name
redistribution_source boolean	route redistribution source (EIGRP only) Choices: `false` `true`
set boolean	Set redistribution-source Choices: `false` `true`
ipv6 dictionary	IPv6 specific information
address dictionary	Match address of route or match packet
acl string	IPv6 access-list name
prefix_list string	IPv6 prefix-list name
flowspec dictionary	Match next-hop address of route
acl string	IPv6 access-list name
dest_pfx boolean	Match dest prefix component of flowspec prefix Choices: `false` `true`
prefix_list string	IPv6 prefix-list name
src_pfx boolean	Match source prefix component of flowspec prefix Choices: `false` `true`
next_hop dictionary	Match next-hop address of route
acl string	IPv6 access-list name
prefix_list string	IPv6 prefix-list name
route_source dictionary	Match advertising source address of route
acl string	IPv6 access-list name
prefix_list string	IPv6 prefix-list name
length dictionary	Packet length
maximum integer	Maximum packet length Please refer vendor documentation for valid values
minimum integer	Minimum packet length Please refer vendor documentation for valid values
local_preference dictionary	Local preference for route
set boolean	Set the Local preference for route Choices: `false` `true`
value list / elements=string	Local preference value Please refer vendor documentation for valid values
mdt_group dictionary	Match routes corresponding to MDT group
acls list / elements=string	IP access-list number/IP standard access-list name Please refer vendor documentation for valid values
set boolean	Set and Match routes corresponding to MDT group Choices: `false` `true`
metric dictionary	Match metric of route
deviation boolean	Deviation option to match metric in a range Choices: `false` `true`
deviation_value integer	deviation value, 500 +- 10 creates the range 490 - 510 Please refer vendor documentation for valid values
external boolean	Match route using external protocol metric Choices: `false` `true`
value integer	Metric value Please refer vendor documentation for valid values
mpls_label boolean	Match routes which have MPLS labels Choices: `false` `true`
policy_lists list / elements=string	Match IP policy list
route_type dictionary	Match route-type of route
external dictionary	external route (BGP, EIGRP and OSPF type 1/2)
set boolean	Set external route Choices: `false` `true`
type_1 boolean	OSPF external type 1 route Choices: `false` `true`
type_2 boolean	OSPF external type 2 route Choices: `false` `true`
internal boolean	internal route (including OSPF intra/inter area) Choices: `false` `true`
level_1 boolean	IS-IS level-1 route Choices: `false` `true`
level_2 boolean	IS-IS level-2 route Choices: `false` `true`
local boolean	locally generated route Choices: `false` `true`
nssa_external dictionary	nssa-external route (OSPF type 1/2)
set boolean	Set nssa-external route Choices: `false` `true`
type_1 boolean	OSPF external type 1 route Choices: `false` `true`
type_2 boolean	OSPF external type 2 route Choices: `false` `true`
rpki dictionary	Match RPKI state of route
invalid boolean	RPKI Invalid State Choices: `false` `true`
not_found boolean	RPKI Not Found State Choices: `false` `true`
valid boolean	RPKI Valid State Choices: `false` `true`
security_group dictionary	Security Group
destination list / elements=integer	Destination Security Group, destination Security tag Please refer vendor documentation for valid values
source list / elements=integer	Source Security Group, source Security tag Please refer vendor documentation for valid values
source_protocol dictionary	Match source-protocol of route
bgp string	Border Gateway Protocol (BGP) Autonomous system number Please refer vendor documentation for valid values
connected boolean	Connected Choices: `false` `true`
eigrp integer	Enhanced Interior Gateway Routing Protocol (EIGRP) Autonomous system number Please refer vendor documentation for valid values
isis boolean	ISO IS-IS Choices: `false` `true`
lisp boolean	Locator ID Separation Protocol (LISP) Choices: `false` `true`
mobile boolean	Mobile routes Choices: `false` `true`
ospf integer	Open Shortest Path First (OSPF) Process ID Please refer vendor documentation for valid values
ospfv3 integer	OSPFv3 Process ID Please refer vendor documentation for valid values
rip boolean	Routing Information Protocol (RIP) Choices: `false` `true`
static boolean	Static routes Choices: `false` `true`
tag dictionary	Match tag of route
tag_list list / elements=string	Route Tag List/Tag list name
value list / elements=string	Tag value/Tag in Dotted Decimal eg, 10.10.10.10
track integer	tracking object
sequence integer	Sequence to insert to/delete from existing route-map entry Please refer vendor documentation for valid values
set dictionary	Match source-protocol of route
aigp_metric dictionary	accumulated metric value
igp_metric boolean	metric value from rib Choices: `false` `true`
value integer	manual value
as_path dictionary	Prepend string for a BGP AS-path attribute
prepend dictionary	Prepend to the as-path
as_number list / elements=string	AS number Please refer vendor documentation for valid values
last_as integer	Prepend last AS to the as-path Number of last-AS prepends Please refer vendor documentation for valid values
tag boolean	Set the tag as an AS-path attribute Choices: `false` `true`
automatic_tag boolean	Automatically compute TAG value Choices: `false` `true`
clns string	OSI summary address Next hop address CLNS summary prefix
comm_list string	set BGP community list (for deletion) Community-list name/number Delete matching communities
community dictionary	BGP community attribute
additive boolean	Add to the existing community Choices: `false` `true`
gshut boolean	Graceful Shutdown (well-known community) Choices: `false` `true`
internet boolean	Internet (well-known community) Choices: `false` `true`
local_as boolean	Do not send outside local AS (well-known community) Choices: `false` `true`
no_advertise boolean	Do not advertise to any peer (well-known community) Choices: `false` `true`
no_export boolean	Do not export to next AS (well-known community) Choices: `false` `true`
none boolean	No community attribute Choices: `false` `true`
number string	community number community number in aa:nn format Please refer vendor documentation for valid values
dampening dictionary	Set BGP route flap dampening parameters
max_suppress integer	Maximum duration to suppress a stable route Please refer vendor documentation for valid values
penalty_half_time integer	half-life time for the penalty Please refer vendor documentation for valid values
reuse_route_val integer	Penalty to start reusing a route Please refer vendor documentation for valid values
suppress_route_val integer	Penalty to start suppressing a route Please refer vendor documentation for valid values
default string	Set default information Default output interface
extcomm_list string	Set BGP/VPN extended community list (for deletion) Extended community-list number/name Delete matching extended communities
extcommunity dictionary	BGP extended community attribute
cost dictionary	Cost extended community
cost_value integer	Cost Value (No-preference Cost = 2147483647) Please refer vendor documentation for valid values
id string	Community ID Please refer vendor documentation for valid values
igp boolean	Compare following IGP cost comparison Choices: `false` `true`
pre_bestpath boolean	Compare before all other steps in bestpath calculation Choices: `false` `true`
rt dictionary	Route Target extended community
additive boolean	Add to the existing extcommunity Choices: `false` `true`
address string	VPN extended community
range dictionary	Specify a range of extended community
lower_limit string	VPN extended community
upper_limit string	VPN extended community
soo string	Site-of-Origin extended community
vpn_distinguisher dictionary	VPN Distinguisher
additive boolean	Add to the existing extcommunity Choices: `false` `true`
address string	VPN extended community
range dictionary	Specify a range of extended community
lower_limit string	VPN extended community
upper_limit string	VPN extended community
global_route boolean	Set to global routing table Choices: `false` `true`
interfaces list / elements=string	Output interface
ip dictionary	IP specific information
address string	Specify IP address Prefix-list name to set ip address
df integer	Set DF bit Choices: `0` `1`
global_route dictionary	global routing table
address string	IP address of next hop
verify_availability dictionary	Verify if nexthop is reachable
address string	IP address of next hop
sequence integer	Sequence to insert into next-hop list Please refer vendor documentation for valid values
track integer	Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
next_hop dictionary	Next hop address
address string	IP address of next hop
dynamic boolean	application dynamically sets next hop DHCP learned next hop Choices: `false` `true`
encapsulate string	Encapsulation profile for VPN nexthop L3VPN Encapsulation profile name
peer_address boolean	Use peer address (for BGP only) Choices: `false` `true`
recursive dictionary	Recursive next-hop
address string	IP address of recursive next hop
global_route boolean	global routing table Choices: `false` `true`
vrf string	VRF
self boolean	Use self address (for BGP only) Choices: `false` `true`
verify_availability dictionary	Verify if nexthop is reachable
address string	IP address of next hop
sequence integer	Sequence to insert into next-hop list Please refer vendor documentation for valid values
set boolean	Set and Verify if nexthop is reachable Choices: `false` `true`
track integer	Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
precedence dictionary	Set precedence field
critical boolean	Set critical precedence (5) Choices: `false` `true`
flash boolean	Set flash precedence (3) Choices: `false` `true`
flash_override boolean	Set flash override precedence (4) Choices: `false` `true`
immediate boolean	Set immediate precedence (2) Choices: `false` `true`
internet boolean	Set internetwork control precedence (6) Choices: `false` `true`
network boolean	Set network control precedence (7) Choices: `false` `true`
priority boolean	Set priority precedence (1) Choices: `false` `true`
routine boolean	Set routine precedence (0) Choices: `false` `true`
set boolean	Just set precedence field Choices: `false` `true`
qos_group integer	Set QOS Group ID Please refer vendor documentation for valid values
tos dictionary	Set type of service field
max_reliability boolean	Set max reliable TOS (2) Choices: `false` `true`
max_throughput boolean	Set max throughput TOS (4) Choices: `false` `true`
min_delay boolean	Set min delay TOS (8) Choices: `false` `true`
min_monetary_cost boolean	Set min monetary cost TOS (1) Choices: `false` `true`
normal boolean	Set normal TOS (0) Choices: `false` `true`
set boolean	Just set type of service field Choices: `false` `true`
vrf dictionary	VRF
address string	IP address of next hop
name string	VRF name
verify_availability dictionary	Verify if nexthop is reachable
address string	IP address of next hop
sequence integer	Sequence to insert into next-hop list Please refer vendor documentation for valid values
set boolean	Set and Verify if nexthop is reachable Choices: `false` `true`
track integer	Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
ipv6 dictionary	IPv6 specific information
address string	IPv6 address IPv6 prefix-list
default boolean	Set default information Choices: `false` `true`
global_route dictionary	global routing table
address string	Next hop address (X:X:X:X::X)
verify_availability dictionary	Verify if nexthop is reachable
address string	Next hop address (X:X:X:X::X)
sequence integer	Sequence to insert into next-hop list Please refer vendor documentation for valid values
track integer	Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
next_hop dictionary	IPv6 Next hop
address string	Next hop address (X:X:X:X::X)
encapsulate string	Encapsulation profile for VPN nexthop L3VPN Encapsulation profile name
peer_address boolean	Use peer address (for BGP only) Choices: `false` `true`
recursive string	Recursive next-hop IPv6 address of recursive next-hop
precedence integer	Set precedence field Precedence value Please refer vendor documentation for valid values
vrf dictionary	VRF name
name string	VRF name
verify_availability dictionary	Verify if nexthop is reachable
address string	IPv6 address of next hop
sequence integer	Sequence to insert into next-hop list Please refer vendor documentation for valid values
track integer	Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
level dictionary	Where to import route
level_1 boolean	Import into a level-1 area Choices: `false` `true`
level_1_2 boolean	Import into level-1 and level-2 Choices: `false` `true`
level_2 boolean	Import into level-2 sub-domain Choices: `false` `true`
nssa_only boolean	Import only into OSPF NSSA areas and don’t propagate Choices: `false` `true`
lisp string	Locator ID Separation Protocol specific information Specify a locator-set to use in LISP route-import The name of the locator set
local_preference integer	BGP local preference path attribute Please refer vendor documentation for valid values
metric dictionary	Metric value for destination routing protocol
deviation string	Add or subtract metric Choices: `"plus"` `"minus"`
eigrp_delay integer	EIGRP delay metric, in 10 microsecond units Please refer vendor documentation for valid values
metric_bandwidth integer	EIGRP Effective bandwidth metric (Loading) where 255 is 100 loaded Please refer vendor documentation for valid values
metric_reliability integer	EIGRP reliability metric where 255 is 100 reliable Please refer vendor documentation for valid values
metric_value integer	Metric value or Bandwidth in Kbits per second Please refer vendor documentation for valid values
mtu integer	EIGRP MTU of the path Please refer vendor documentation for valid values
metric_type dictionary	Type of metric for destination routing protocol
external boolean	IS-IS external metric Choices: `false` `true`
internal boolean	IS-IS internal metric or Use IGP metric as the MED for BGP Choices: `false` `true`
type_1 boolean	OSPF external type 1 metric Choices: `false` `true`
type_2 boolean	OSPF external type 2 metric Choices: `false` `true`
mpls_label boolean	Set MPLS label for prefix Choices: `false` `true`
origin dictionary	BGP origin code
igp boolean	local IGP Choices: `false` `true`
incomplete boolean	unknown heritage Choices: `false` `true`
tag string	Tag value for destination routing protocol Tag value A.B.C.D(dotted decimal format)/Tag value
traffic_index integer	BGP traffic classification number for accounting Please refer vendor documentation for valid values
vrf string	Define VRF name VPN Routing/Forwarding instance name
weight integer	BGP weight for routing table Please refer vendor documentation for valid values
route_map string	Route map tag/name
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh running-config \| section ^route-map. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in `config` option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from `running_config` option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of `running_config` option should be the same format as the output of command sh running-config \| section ^route-map executed on device. For state parsed active connection to remote host is not required. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"gathered"` `"parsed"` `"rendered"`

Notes 

Note

Tested against Cisco IOSXE Version 17.3 on CML.
This module works with connection network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html

Examples 

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Delete provided Route maps config
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
    state: deleted

#  Commands Fired:
#  ---------------
#
#  "commands": [
#         "no route-map test_1"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^route-map
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

# Using deleted without any config passed (NOTE: This will delete all Route maps configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Delete all Route maps config
  cisco.ios.ios_route_maps:
    state: deleted

# Commands Fired:
# ---------------
#
#  "commands": [
#         "no route-map test_1",
#         "no route-map test_2"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^route-map
# router-ios#

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# router-ios#

- name: Merge provided Route maps configuration
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
        entries:
          - sequence: 10
            action: deny
            description: this is test route
            match:
              ip:
                next_hop:
                  prefix_lists:
                    - test_1_new
                    - test_2_new
                route_source:
                  acls:
                    - 10
              security_group:
                source:
                  - 10
                  - 20
              local_preference:
                value:
                  - 50
                  - 100
              mpls_label: true
          - sequence: 20
            action: deny
            continue_entry:
              entry_sequence: 100
            match:
              additional_paths:
                all: true
                group_best: true
              as_path:
                acls:
                  - 100
                  - 200
              ipv6:
                address:
                  acl: test_acl_20
              route_type:
                level_1: true
              tag:
                tag_list:
                  - test_match_tag
              track: 105
      - route_map: test_2
        entries:
          - sequence: 10
            action: deny
            match:
              ipv6:
                address:
                  acl: test_ip_acl
                next_hop:
                  prefix_list: test_new
                route_source:
                  acl: route_src_acl
              security_group:
                source:
                  - 10
                  - 20
              local_preference:
                value:
                  - 55
                  - 105
              mpls_label: true
            set:
              aigp_metric:
                value: 100
              automatic_tag: true
              extcommunity:
                cost:
                  id: 10
                  cost_value: 100
                  pre_bestpath: true
              ip:
                address: 192.0.2.1
                df: 1
                next_hop:
                  recursive:
                    global_route: true
                    address: 198.51.110.1
                  verify_availability:
                    address: 198.51.111.1
                    sequence: 100
                    track: 10
                precedence:
                  critical: true
    state: merged

#  Commands Fired:
#  ---------------
#
#   "commands": [
#      "route-map test_2 deny 10",
#      "match security-group source tag 10 20",
#      "match local-preference 55 105",
#      "match mpls-label",
#      "match ipv6 next-hop prefix-list test_new",
#      "match ipv6 route-source route_src_acl",
#      "match ipv6 address test_ip_acl",
#      "set extcommunity cost pre-bestpath 10 100",
#      "set ip df 1",
#      "set ip next-hop recursive global 198.51.110.1",
#      "set ip next-hop verify-availability 198.51.111.1 100 track 10",
#      "set ip precedence critical",
#      "set ip address prefix-list 192.0.2.1",
#      "set automatic-tag",
#      "set aigp-metric 100",
#      "route-map test_1 deny 20",
#      "continue 100",
#      "match track 105",
#      "match tag list test_match_tag",
#      "match ipv6 address test_acl_20",
#      "match route-type level-1",
#      "match as-path 200 100",
#      "match additional-paths advertise-set all group-best",
#      "route-map test_1 deny 10",
#      "description this is test route",
#      "match security-group source tag 10 20",
#      "match ip next-hop prefix-list test_2_new test_1_new",
#      "match ip route-source 10",
#      "match local-preference 100 50",
#      "match mpls-label"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Override provided Route maps configuration
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
        entries:
          - sequence: 10
            action: deny
            description: this is override route
            match:
              ip:
                next_hop:
                  acls:
                    - 10
                    - test1_acl
                flowspec:
                  dest_pfx: true
                  acls:
                    - test_acl_1
                    - test_acl_2
              length:
                minimum: 10
                maximum: 100
              metric:
                value: 10
                external: true
              security_group:
                source:
                  - 10
                  - 20
              mpls_label: true
            set:
              extcommunity:
                vpn_distinguisher:
                  address: 192.0.2.1:12
                  additive: true
              metric:
                metric_value: 100
                deviation: plus
                eigrp_delay: 100
                metric_reliability: 10
                metric_bandwidth: 20
                mtu: 30
      - route_map: test_override
        entries:
          - sequence: 10
            action: deny
            match:
              ipv6:
                address:
                  acl: test_acl
                next_hop:
                  prefix_list: test_new
                route_source:
                  acl: route_src_acl
              security_group:
                source:
                  - 15
                  - 20
              local_preference:
                value:
                  - 105
                  - 110
              mpls_label: true
            set:
              aigp_metric:
                value: 100
              automatic_tag: true
              extcommunity:
                cost:
                  id: 10
                  cost_value: 100
                  pre_bestpath: true
              ip:
                address: 192.0.2.1
                df: 1
                next_hop:
                  recursive:
                    global_route: true
                    address: 198.110.51.1
                  verify_availability:
                    address: 198.110.51.2
                    sequence: 100
                    track: 10
                precedence:
                  critical: true
    state: overridden

# Commands Fired:
# ---------------
#
#  "commands": [
#         "no route-map test_2",
#         "route-map test_override deny 10",
#         "match security-group source tag 15 20",
#         "match local-preference 110 105",
#         "match mpls-label",
#         "match ipv6 next-hop prefix-list test_new",
#         "match ipv6 route-source route_src_acl",
#         "match ipv6 address test_acl",
#         "set extcommunity cost pre-bestpath 10 100",
#         "set ip df 1",
#         "set ip next-hop recursive global 198.110.51.1",
#         "set ip next-hop verify-availability 198.110.51.2 100 track 10",
#         "set ip precedence critical",
#         "set ip address prefix-list 192.0.2.1",
#         "set automatic-tag",
#         "set aigp-metric 100",
#         "route-map test_1 deny 10",
#         "no description this is test route",
#         "description this is override route",
#         "match ip flowspec dest-pfx test_acl_1 test_acl_2",
#         "no match ip next-hop prefix-list test_2_new test_1_new",
#         "match ip next-hop test1_acl 10",
#         "no match ip route-source 10",
#         "match metric external 10",
#         "match length 10 100",
#         "no match local-preference 100 50",
#         "set extcommunity vpn-distinguisher 192.0.2.1:12 additive",
#         "set metric 100 +100 10 20 30",
#         "no route-map test_1 deny 20"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_override deny 10
#  match security-group source tag 15 20
#  match local-preference 110 105
#  match mpls-label
#  match ipv6 address test_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.110.51.2 100 track 10
#  set ip next-hop recursive global 198.110.51.1
# route-map test_1 deny 10
#  description this is override route
#  match ip flowspec dest-pfx test_acl_1 test_acl_2
#  match ip next-hop test1_acl 10
#  match security-group source tag 10 20
#  match metric external 10
#  match mpls-label
#  match length 10 100
#  set metric 100 +100 10 20 30
#  set extcommunity vpn-distinguisher 192.0.2.1:12 additive

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Replaced provided Route maps configuration
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
        entries:
          - sequence: 10
            action: deny
            description: this is replaced route
            match:
              ip:
                next_hop:
                  acls:
                    - 10
                    - test1_acl
                flowspec:
                  dest_pfx: true
                  acls:
                    - test_acl_1
                    - test_acl_2
              length:
                minimum: 10
                maximum: 100
              metric:
                value: 10
                external: true
              security_group:
                source:
                  - 10
                  - 20
              mpls_label: true
            set:
              extcommunity:
                vpn_distinguisher:
                  address: 192.0.2.1:12
                  additive: true
              metric:
                metric_value: 100
                deviation: plus
                eigrp_delay: 100
                metric_reliability: 10
                metric_bandwidth: 20
                mtu: 30
      - route_map: test_replaced
        entries:
          - sequence: 10
            action: deny
            match:
              ipv6:
                address:
                  acl: test_acl
                next_hop:
                  prefix_list: test_new
                route_source:
                  acl: route_src_acl
              security_group:
                source:
                  - 15
                  - 20
              local_preference:
                value:
                  - 105
                  - 110
              mpls_label: true
            set:
              aigp_metric:
                value: 100
              automatic_tag: true
              extcommunity:
                cost:
                  id: 10
                  cost_value: 100
                  pre_bestpath: true
              ip:
                address: 192.0.2.1
                df: 1
                next_hop:
                  recursive:
                    global_route: true
                    address: 198.110.51.1
                  verify_availability:
                    address: 198.110.51.2
                    sequence: 100
                    track: 10
                precedence:
                  critical: true
    state: replaced

# Commands Fired:
# ---------------
#  "commands": [
#         "route-map test_replaced deny 10",
#         "match security-group source tag 15 20",
#         "match local-preference 110 105",
#         "match mpls-label",
#         "match ipv6 next-hop prefix-list test_new",
#         "match ipv6 route-source route_src_acl",
#         "match ipv6 address test_acl",
#         "set extcommunity cost pre-bestpath 10 100",
#         "set ip df 1",
#         "set ip next-hop recursive global 198.110.51.1",
#         "set ip next-hop verify-availability 198.110.51.2 100 track 10",
#         "set ip precedence critical",
#         "set ip address prefix-list 192.0.2.1",
#         "set automatic-tag",
#         "set aigp-metric 100",
#         "route-map test_1 deny 10",
#         "no description this is test route",
#         "description this is replaced route",
#         "match ip flowspec dest-pfx test_acl_1 test_acl_2",
#         "no match ip next-hop prefix-list test_2_new test_1_new",
#         "match ip next-hop test1_acl 10",
#         "no match ip route-source 10",
#         "match metric external 10",
#         "match length 10 100",
#         "no match local-preference 100 50",
#         "set extcommunity vpn-distinguisher 192.0.2.1:12 additive",
#         "set metric 100 +100 10 20 30",
#         "no route-map test_1 deny 20"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_replaced deny 10
#  match security-group source tag 15 20
#  match local-preference 110 105
#  match mpls-label
#  match ipv6 address test_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.110.51.2 100 track 10
#  set ip next-hop recursive global 198.110.51.1
# route-map test_1 deny 10
#  description this is replaced route
#  match ip flowspec dest-pfx test_acl_1 test_acl_2
#  match ip next-hop test1_acl 10
#  match security-group source tag 10 20
#  match metric external 10
#  match mpls-label
#  match length 10 100
#  set metric 100 +100 10 20 30
#  set extcommunity vpn-distinguisher 192.0.2.1:12 additive
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Gather Route maps provided configurations
  cisco.ios.ios_route_maps:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": [
#         {
#             "entries": [
#                 {
#                     "action": "deny",
#                     "description": "this is test route",
#                     "match": {
#                         "ip": {
#                             "next_hop": {
#                                 "prefix_lists": [
#                                     "test_2_new",
#                                     "test_1_new"
#                                 ]
#                             },
#                             "route_source": {
#                                 "acls": [
#                                     "10"
#                                 ]
#                             }
#                         },
#                         "local_preference": {
#                             "value": [
#                                 "100",
#                                 "50"
#                             ]
#                         },
#                         "mpls_label": true,
#                         "security_group": {
#                             "source": [
#                                 10,
#                                 20
#                             ]
#                         }
#                     },
#                     "sequence": 10
#                 },
#                 {
#                     "action": "deny",
#                     "continue_entry": {
#                         "entry_sequence": 100
#                     },
#                     "match": {
#                         "additional_paths": {
#                             "all": true,
#                             "group_best": true
#                         },
#                         "as_path": {
#                             "acls": [
#                                 200,
#                                 100
#                             ]
#                         },
#                         "ipv6": {
#                             "address": {
#                                 "acl": "test_acl_20"
#                             }
#                         },
#                         "route_type": {
#                             "external": {
#                                 "set": true
#                             },
#                             "level_1": true,
#                             "nssa_external": {
#                                 "set": true
#                             }
#                         },
#                         "tag": {
#                             "tag_list": [
#                                 "test_match_tag"
#                             ]
#                         },
#                         "track": 105
#                     },
#                     "sequence": 20
#                 }
#             ],
#             "route_map": "test_1"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "deny",
#                     "match": {
#                         "ipv6": {
#                             "address": {
#                                 "acl": "test_ip_acl"
#                             },
#                             "next_hop": {
#                                 "prefix_list": "test_new"
#                             },
#                             "route_source": {
#                                 "acl": "route_src_acl"
#                             }
#                         },
#                         "local_preference": {
#                             "value": [
#                                 "55",
#                                 "105"
#                             ]
#                         },
#                         "mpls_label": true,
#                         "security_group": {
#                             "source": [
#                                 10,
#                                 20
#                             ]
#                         }
#                     },
#                     "sequence": 10,
#                     "set": {
#                         "aigp_metric": {
#                             "value": 100
#                         },
#                         "automatic_tag": true,
#                         "extcommunity": {
#                             "cost": {
#                                 "cost_value": 100,
#                                 "id": "10",
#                                 "pre_bestpath": true
#                             }
#                         },
#                         "ip": {
#                             "address": "192.0.2.1",
#                             "df": 1,
#                             "next_hop": {
#                                 "recursive": {
#                                     "address": "198.51.110.1",
#                                     "global_route": true
#                                 },
#                                 "verify_availability": {
#                                     "address": "198.51.111.1",
#                                     "sequence": 100,
#                                     "track": 10
#                                 }
#                             },
#                             "precedence": {
#                                 "critical": true
#                             }
#                         }
#                     }
#                 }
#             ],
#             "route_map": "test_2"
#         }
#     ]

# After state:
# ------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
        entries:
          - sequence: 10
            action: deny
            description: this is test route
            match:
              ip:
                next_hop:
                  prefix_lists:
                    - test_1_new
                    - test_2_new
                route_source:
                  acls:
                    - 10
              security_group:
                source:
                  - 10
                  - 20
              local_preference:
                value:
                  - 50
                  - 100
              mpls_label: true
          - sequence: 20
            action: deny
            continue_entry:
              entry_sequence: 100
            match:
              additional_paths:
                all: true
                group_best: true
              as_path:
                acls:
                  - 100
                  - 200
              ipv6:
                address:
                  acl: test_acl_20
              route_type:
                level_1: true
              tag:
                tag_list:
                  - test_match_tag
              track: 105
      - route_map: test_2
        entries:
          - sequence: 10
            action: deny
            match:
              ipv6:
                address:
                  acl: test_ip_acl
                next_hop:
                  prefix_list: test_new
                route_source:
                  acl: route_src_acl
              security_group:
                source:
                  - 10
                  - 20
              local_preference:
                value:
                  - 55
                  - 105
              mpls_label: true
            set:
              aigp_metric:
                value: 100
              automatic_tag: true
              extcommunity:
                cost:
                  id: 10
                  cost_value: 100
                  pre_bestpath: true
              ip:
                address: 192.0.2.1
                df: 1
                next_hop:
                  recursive:
                    global_route: true
                    address: 198.51.110.1
                  verify_availability:
                    address: 198.51.111.1
                    sequence: 100
                    track: 10
                precedence:
                  critical: true
    state: rendered

# Module Execution Result:
# ------------------------
#
#  "rendered": [
#      "route-map test_2 deny 10",
#      "match security-group source tag 10 20",
#      "match local-preference 55 105",
#      "match mpls-label",
#      "match ipv6 next-hop prefix-list test_new",
#      "match ipv6 route-source route_src_acl",
#      "match ipv6 address test_ip_acl",
#      "set extcommunity cost pre-bestpath 10 100",
#      "set ip df 1",
#      "set ip next-hop recursive global 198.51.110.1",
#      "set ip next-hop verify-availability 198.51.111.1 100 track 10",
#      "set ip precedence critical",
#      "set ip address prefix-list 192.0.2.1",
#      "set automatic-tag",
#      "set aigp-metric 100",
#      "route-map test_1 deny 20",
#      "continue 100",
#      "match track 105",
#      "match tag list test_match_tag",
#      "match ipv6 address test_acl_20",
#      "match route-type level-1",
#      "match as-path 200 100",
#      "match additional-paths advertise-set all group-best",
#      "route-map test_1 deny 10",
#      "description this is test route",
#      "match security-group source tag 10 20",
#      "match ip next-hop prefix-list test_2_new test_1_new",
#      "match ip route-source 10",
#      "match local-preference 100 50",
#      "match mpls-label"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_route_maps:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#         {
#             "entries": [
#                 {
#                     "action": "deny",
#                     "description": "this is test route",
#                     "match": {
#                         "ip": {
#                             "next_hop": {
#                                 "prefix_lists": [
#                                     "test_2_new",
#                                     "test_1_new"
#                                 ]
#                             },
#                             "route_source": {
#                                 "acls": [
#                                     "10"
#                                 ]
#                             }
#                         },
#                         "local_preference": {
#                             "value": [
#                                 "100",
#                                 "50"
#                             ]
#                         },
#                         "mpls_label": true,
#                         "security_group": {
#                             "source": [
#                                 10,
#                                 20
#                             ]
#                         }
#                     },
#                     "sequence": 10
#                 },
#                 {
#                     "action": "deny",
#                     "continue_entry": {
#                         "entry_sequence": 100
#                     },
#                     "match": {
#                         "additional_paths": {
#                             "all": true,
#                             "group_best": true
#                         },
#                         "as_path": {
#                             "acls": [
#                                 200,
#                                 100
#                             ]
#                         },
#                         "ipv6": {
#                             "address": {
#                                 "acl": "test_acl_20"
#                             }
#                         },
#                         "route_type": {
#                             "external": {
#                                 "set": true
#                             },
#                             "level_1": true,
#                             "nssa_external": {
#                                 "set": true
#                             }
#                         },
#                         "tag": {
#                             "tag_list": [
#                                 "test_match_tag"
#                             ]
#                         },
#                         "track": 105
#                     },
#                     "sequence": 20
#                 }
#             ],
#             "route_map": "test_1"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "deny",
#                     "match": {
#                         "ipv6": {
#                             "address": {
#                                 "acl": "test_ip_acl"
#                             },
#                             "next_hop": {
#                                 "prefix_list": "test_new"
#                             },
#                             "route_source": {
#                                 "acl": "route_src_acl"
#                             }
#                         },
#                         "local_preference": {
#                             "value": [
#                                 "55",
#                                 "105"
#                             ]
#                         },
#                         "mpls_label": true,
#                         "security_group": {
#                             "source": [
#                                 10,
#                                 20
#                             ]
#                         }
#                     },
#                     "sequence": 10,
#                     "set": {
#                         "aigp_metric": {
#                             "value": 100
#                         },
#                         "automatic_tag": true,
#                         "extcommunity": {
#                             "cost": {
#                                 "cost_value": 100,
#                                 "id": "10",
#                                 "pre_bestpath": true
#                             }
#                         },
#                         "ip": {
#                             "address": "192.0.2.1",
#                             "df": 1,
#                             "next_hop": {
#                                 "recursive": {
#                                     "address": "198.51.110.1",
#                                     "global_route": true
#                                 },
#                                 "verify_availability": {
#                                     "address": "198.51.111.1",
#                                     "sequence": 100,
#                                     "track": 10
#                                 }
#                             },
#                             "precedence": {
#                                 "critical": true
#                             }
#                         }
#                     }
#                 }
#             ],
#             "route_map": "test_2"
#         }
#     ]

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The resulting configuration model invocation. Returned: when changed Sample: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
before list / elements=string	The configuration prior to the model invocation. Returned: always Sample: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["route-map test_1 deny 10", "description this is test route", "match ip route-source 10", "match track 105"]`

Authors

Sumit Jaiswal (@justjais)

Collection links

Issue Tracker Repository (Sources)

cisco.ios.ios_route_maps module – Resource module to configure route maps.

Synopsis

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Parameters 

Notes 

Examples 

Return Values 