ansible.builtin.replace module – Replace all instances of a particular string in a file using a back-referenced regular expression

Note

This module is part of ansible-core and included in all Ansible installations. In most cases, you can use the short module name replace even without specifying the collections keyword. However, we recommend you use the Fully Qualified Collection Name (FQCN) ansible.builtin.replace for easy linking to the module documentation and to avoid conflicting with other collections that may have the same module name.

Synopsis

  • This module will replace all instances of a pattern within a file.

  • It is up to the user to maintain idempotence by ensuring that the same pattern would never match any replacements made.

Parameters

Parameter

Comments

after

string

If specified, only content after this match will be replaced/removed.

Can be used in combination with before.

Uses Python regular expressions; see https://docs.python.org/3/library/re.html.

Uses DOTALL, which means the . special character can match newlines.

Does not use MULTILINE, so ^ and $ will only match the beginning and end of the file.

attributes

aliases: attr

string

The attributes the resulting filesystem object should have.

To get supported flags look at the man page for chattr on the target system.

This string should contain the attributes in the same order as the one displayed by lsattr.

The = operator is assumed as default, otherwise + or - operators need to be included in the string.

backup

boolean

Create a backup file including the timestamp information so you can get the original file back if you somehow clobbered it incorrectly.

Choices:

  • false ← (default)

  • true

before

string

If specified, only content before this match will be replaced/removed.

Can be used in combination with after.

Uses Python regular expressions; see https://docs.python.org/3/library/re.html.

Uses DOTALL, which means the . special character can match newlines.

Does not use MULTILINE, so ^ and $ will only match the beginning and end of the file.

encoding

string

The character encoding for reading and writing the file.

Default: "utf-8"

group

string

Name of the group that should own the filesystem object, as would be fed to chown.

When left unspecified, it uses the current group of the current user unless you are root, in which case it can preserve the previous ownership.

mode

any

The permissions the resulting filesystem object should have.

For those used to /usr/bin/chmod remember that modes are actually octal numbers. You must give Ansible enough information to parse them correctly. For consistent results, quote octal numbers (for example, '644' or '1777') so Ansible receives a string and can do its own conversion from string into number. Adding a leading zero (for example, 0755) works sometimes, but can fail in loops and some other circumstances.

Giving Ansible a number without following either of these rules will end up with a decimal number which will have unexpected results.

As of Ansible 1.8, the mode may be specified as a symbolic mode (for example, u+rwx or u=rw,g=r,o=r).

If mode is not specified and the destination filesystem object does not exist, the default umask on the system will be used when setting the mode for the newly created filesystem object.

If mode is not specified and the destination filesystem object does exist, the mode of the existing filesystem object will be used.

Specifying mode is the best way to ensure filesystem objects are created with the correct permissions. See CVE-2020-1736 for further details.

owner

string

Name of the user that should own the filesystem object, as would be fed to chown.

When left unspecified, it uses the current user unless you are root, in which case it can preserve the previous ownership.

Specifying a numeric username will be assumed to be a user ID and not a username. Avoid numeric usernames to avoid this confusion.

path

aliases: dest, destfile, name

path / required

The file to modify.

Before Ansible 2.3 this option was only usable as dest, destfile and name.

regexp

string / required

The regular expression to look for in the contents of the file.

Uses Python regular expressions; see https://docs.python.org/3/library/re.html.

Uses MULTILINE mode, which means ^ and $ match the beginning and end of the file, as well as the beginning and end respectively of each line of the file.

Does not use DOTALL, which means the . special character matches any character except newlines. A common mistake is to assume that a negated character set like [^#] will also not match newlines.

In order to exclude newlines, they must be added to the set like [^#\n].

Note that, as of Ansible 2.0, short form tasks should have any escape sequences backslash-escaped in order to prevent them being parsed as string literal escapes. See the examples.

replace

string

The string to replace regexp matches.

May contain backreferences that will get expanded with the regexp capture groups if the regexp matches.

If not set, matches are removed entirely.

Backreferences can be used ambiguously like \1, or explicitly like \g<1>.

Default: ""

selevel

string

The level part of the SELinux filesystem object context.

This is the MLS/MCS attribute, sometimes known as the range.

When set to _default, it will use the level portion of the policy if available.

serole

string

The role part of the SELinux filesystem object context.

When set to _default, it will use the role portion of the policy if available.

setype

string

The type part of the SELinux filesystem object context.

When set to _default, it will use the type portion of the policy if available.

seuser

string

The user part of the SELinux filesystem object context.

By default it uses the system policy, where applicable.

When set to _default, it will use the user portion of the policy if available.

unsafe_writes

boolean

Influence when to use atomic operation to prevent data corruption or inconsistent reads from the target filesystem object.

By default this module uses atomic operations to prevent data corruption or inconsistent reads from the target filesystem objects, but sometimes systems are configured or just broken in ways that prevent this. One example is docker mounted filesystem objects, which cannot be updated atomically from inside the container and can only be written in an unsafe manner.

This option allows Ansible to fall back to unsafe methods of updating filesystem objects when atomic operations fail (however, it doesn’t force Ansible to perform unsafe writes).

IMPORTANT! Unsafe writes are subject to race conditions and can lead to data corruption.

Choices:

  • false ← (default)

  • true

validate

string

The validation command to run before copying the updated file into the final destination.

A temporary file path is used to validate, passed in through %s which must be present as in the examples below.

Also, the command is passed securely so shell features such as expansion and pipes will not work.

For an example on how to handle more complex validation than what this option provides, see handling complex validation.

Attributes

Attribute

Support

Description

check_mode

Support: full

Can run in check_mode and return changed status prediction without modifying target, if not supported the action will be skipped.

diff_mode

Support: full

Will return details on what has changed (or possibly needs changing in check_mode), when in diff mode

platform

Platform: posix

Target OS/families that can be operated against

safe_file_operations

Support: full

Uses Ansible’s strict file operation functions to ensure proper permissions and avoid data corruption

vault

Support: none

Can automatically decrypt Ansible vaulted files

Notes

Note

  • As of Ansible 2.3, the dest option has been changed to path as default, but dest still works as well.

  • As of Ansible 2.7.10, the combined use of before and after works properly. If you were relying on the previous incorrect behavior, you may be need to adjust your tasks. See https://github.com/ansible/ansible/issues/31354 for details.

  • Option follow has been removed in Ansible 2.5, because this module modifies the contents of the file so follow=no does not make sense.

Examples

- name: Replace old hostname with new hostname (requires Ansible >= 2.4)
  ansible.builtin.replace:
    path: /etc/hosts
    regexp: '(\s+)old\.host\.name(\s+.*)?$'
    replace: '\1new.host.name\2'

- name: Replace after the expression till the end of the file (requires Ansible >= 2.4)
  ansible.builtin.replace:
    path: /etc/apache2/sites-available/default.conf
    after: 'NameVirtualHost [*]'
    regexp: '^(.+)$'
    replace: '# \1'

- name: Replace before the expression from the beginning of the file (requires Ansible >= 2.4)
  ansible.builtin.replace:
    path: /etc/apache2/sites-available/default.conf
    before: '# live site config'
    regexp: '^(.+)$'
    replace: '# \1'

# Prior to Ansible 2.7.10, using before and after in combination did the opposite of what was intended.
# see https://github.com/ansible/ansible/issues/31354 for details.
# Note (?m) which turns on MULTILINE mode so ^ matches any line's beginning
- name: Replace between the expressions (requires Ansible >= 2.4)
  ansible.builtin.replace:
    path: /etc/hosts
    after: '(?m)^<VirtualHost [*]>'
    before: '</VirtualHost>'
    regexp: '^(.+)$'
    replace: '# \1'

- name: Supports common file attributes
  ansible.builtin.replace:
    path: /home/jdoe/.ssh/known_hosts
    regexp: '^old\.host\.name[^\n]*\n'
    owner: jdoe
    group: jdoe
    mode: '0644'

- name: Supports a validate command
  ansible.builtin.replace:
    path: /etc/apache/ports
    regexp: '^(NameVirtualHost|Listen)\s+80\s*$'
    replace: '\1 127.0.0.1:8080'
    validate: '/usr/sbin/apache2ctl -f %s -t'

- name: Short form task (in ansible 2+) necessitates backslash-escaped sequences
  ansible.builtin.replace: path=/etc/hosts regexp='\\b(localhost)(\\d*)\\b' replace='\\1\\2.localdomain\\2 \\1\\2'

- name: Long form task does not
  ansible.builtin.replace:
    path: /etc/hosts
    regexp: '\b(localhost)(\d*)\b'
    replace: '\1\2.localdomain\2 \1\2'

- name: Explicitly specifying positional matched groups in replacement
  ansible.builtin.replace:
    path: /etc/ssh/sshd_config
    regexp: '^(ListenAddress[ ]+)[^\n]+$'
    replace: '\g<1>0.0.0.0'

- name: Explicitly specifying named matched groups
  ansible.builtin.replace:
    path: /etc/ssh/sshd_config
    regexp: '^(?P<dctv>ListenAddress[ ]+)(?P<host>[^\n]+)$'
    replace: '#\g<dctv>\g<host>\n\g<dctv>0.0.0.0'

Authors

  • Evan Kaufman (@EvanK)