ansible.utils.remove_keys filter – Remove specific keys from a data recursively.
Note
This filter plugin is part of the ansible.utils collection (version 4.1.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install ansible.utils.
To use it in a playbook, specify: ansible.utils.remove_keys.
New in ansible.utils 2.5.0
Synopsis
This plugin removes specific keys from a provided data recursively.
Matching parameter defaults to equals unless
matching_parameteris explicitly mentioned.Using the parameters below-
data|ansible.utils.remove_keys(target([....]))
Keyword parameters
This describes keyword parameters of the filter. These are the values key1=value1, key2=value2 and so on in the following
example: input | ansible.utils.remove_keys(key1=value1, key2=value2, ...)
Parameter |
Comments |
|---|---|
This option represents a list of dictionaries or a dictionary with any level of nesting data. For example |
|
Specify the matching configuration of target keys and data attributes. Choices:
|
|
Specify the target keys to remove in list format. |
Examples
# example.yaml
# interfaces:
# - name: eth0
# enabled: true
# duplex: auto
# speed: auto
# note:
# - Connected green wire
# - name: eth1
# description: Configured by Ansible - Interface 1
# mtu: 1500
# speed: auto
# duplex: auto
# enabled: true
# note:
# - Connected blue wire
# - Configured by Paul
# vifs:
# - vlan_id: 100
# description: Eth1 - VIF 100
# mtu: 400
# enabled: true
# comment: Needs reconfiguration
# - vlan_id: 101
# description: Eth1 - VIF 101
# enabled: true
# - name: eth2
# description: Configured by Ansible - Interface 2 (ADMIN DOWN)
# mtu: 600
# enabled: false
# Playbook
- name: remove multiple keys from a provided data
ansible.builtin.set_fact:
data: '{{ interfaces }}'
- debug:
msg: '{{ data|ansible.utils.remove_keys(target=[''note'', ''comment'']) }}'
# Output
# TASK [remove multiple keys from a provided data] ***************************************
# ok: [localhost] => {
# "ansible_facts": {
# "data": [
# {
# "duplex": "auto",
# "enabled": true,
# "name": "eth0",
# "note": [
# "Connected green wire"
# ],
# "speed": "auto"
# },
# {
# "description": "Configured by Ansible - Interface 1",
# "duplex": "auto",
# "enabled": true,
# "mtu": 1500,
# "name": "eth1",
# "note": [
# "Connected blue wire",
# "Configured by Paul"
# ],
# "speed": "auto",
# "vifs": [
# {
# "comment": "Needs reconfiguration",
# "description": "Eth1 - VIF 100",
# "enabled": true,
# "mtu": 400,
# "vlan_id": 100
# },
# {
# "description": "Eth1 - VIF 101",
# "enabled": true,
# "vlan_id": 101
# }
# ]
# },
# {
# "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
# "enabled": false,
# "mtu": 600,
# "name": "eth2"
# }
# ]
# },
# "changed": false
# }
# Read vars_file 'example.yaml'
# TASK [debug] ********************************************
# ok: [localhost] => {
# "msg": [
# {
# "duplex": "auto",
# "enabled": true,
# "name": "eth0",
# "speed": "auto"
# },
# {
# "description": "Configured by Ansible - Interface 1",
# "duplex": "auto",
# "enabled": true,
# "mtu": 1500,
# "name": "eth1",
# "speed": "auto",
# "vifs": [
# {
# "description": "Eth1 - VIF 100",
# "enabled": true,
# "mtu": 400,
# "vlan_id": 100
# },
# {
# "description": "Eth1 - VIF 101",
# "enabled": true,
# "vlan_id": 101
# }
# ]
# },
# {
# "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
# "enabled": false,
# "mtu": 600,
# "name": "eth2"
# }
# ]
# }
# example.yaml
# interfaces:
# - name: eth0
# enabled: true
# duplex: auto
# speed: auto
# note:
# - Connected green wire
# - name: eth1
# description: Configured by Ansible - Interface 1
# mtu: 1500
# speed: auto
# duplex: auto
# enabled: true
# note:
# - Connected blue wire
# - Configured by Paul
# vifs:
# - vlan_id: 100
# description: Eth1 - VIF 100
# mtu: 400
# enabled: true
# comment: Needs reconfiguration
# - vlan_id: 101
# description: Eth1 - VIF 101
# enabled: true
# - name: eth2
# description: Configured by Ansible - Interface 2 (ADMIN DOWN)
# mtu: 600
# enabled: false
# Playbook
- name: remove multiple keys from a provided data
ansible.builtin.set_fact:
data: '{{ interfaces }}'
- debug:
msg: >-
{{ data|ansible.utils.remove_keys(target=['^note$', '^comment'],
matching_parameter= 'regex') }}
# Output
# TASK [remove multiple keys from a provided data] ***********************
# ok: [localhost] => {
# "ansible_facts": {
# "data": [
# {
# "duplex": "auto",
# "enabled": true,
# "name": "eth0",
# "note": [
# "Connected green wire"
# ],
# "speed": "auto"
# },
# {
# "description": "Configured by Ansible - Interface 1",
# "duplex": "auto",
# "enabled": true,
# "mtu": 1500,
# "name": "eth1",
# "note": [
# "Connected blue wire",
# "Configured by Paul"
# ],
# "speed": "auto",
# "vifs": [
# {
# "comment": "Needs reconfiguration",
# "description": "Eth1 - VIF 100",
# "enabled": true,
# "mtu": 400,
# "vlan_id": 100
# },
# {
# "description": "Eth1 - VIF 101",
# "enabled": true,
# "vlan_id": 101
# }
# ]
# },
# {
# "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
# "enabled": false,
# "mtu": 600,
# "name": "eth2"
# }
# ]
# },
# "changed": false
# }
# Read vars_file 'example.yaml'
# TASK [debug] *****************************************
# ok: [localhost] => {
# "msg": [
# {
# "duplex": "auto",
# "enabled": true,
# "name": "eth0",
# "speed": "auto"
# },
# {
# "description": "Configured by Ansible - Interface 1",
# "duplex": "auto",
# "enabled": true,
# "mtu": 1500,
# "name": "eth1",
# "speed": "auto",
# "vifs": [
# {
# "description": "Eth1 - VIF 100",
# "enabled": true,
# "mtu": 400,
# "vlan_id": 100
# },
# {
# "description": "Eth1 - VIF 101",
# "enabled": true,
# "vlan_id": 101
# }
# ]
# },
# {
# "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
# "enabled": false,
# "mtu": 600,
# "name": "eth2"
# }
# ]
# }