cisco.iosxr.iosxr_lldp_global module – Resource module to configure LLDP.

Note

This module is part of the cisco.iosxr collection (version 10.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_lldp_global.

New in cisco.iosxr 1.0.0

Synopsis

  • This module manages Global Link Layer Discovery Protocol (LLDP) settings on IOS-XR devices.

Aliases: lldp_global

Parameters

Parameter

Comments

config

dictionary

The provided global LLDP configuration.

holdtime

integer

Specifies the holdtime (in sec) to be sent in packets.

reinit

integer

Specifies the delay (in sec) for LLDP initialization on any interface.

subinterfaces

boolean

Enable or disable LLDP over sub-interfaces.

Choices:

  • false

  • true

timer

integer

Specifies the rate at which LLDP packets are sent (in sec).

tlv_select

dictionary

Specifies the LLDP TLVs to enable or disable.

management_address

boolean

Enable or disable management address TLV.

Choices:

  • false

  • true

port_description

boolean

Enable or disable port description TLV.

Choices:

  • false

  • true

system_capabilities

boolean

Enable or disable system capabilities TLV.

Choices:

  • false

  • true

system_description

boolean

Enable or disable system description TLV.

Choices:

  • false

  • true

system_name

boolean

Enable or disable system name TLV.

Choices:

  • false

  • true

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS-XR device by executing the command show running-config lldp.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state of the configuration after module completion.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "deleted"

  • "parsed"

  • "gathered"

  • "rendered"

  • "overridden"

Notes

Note

Examples

# Using merged
#
#
# -------------
# Before State
# -------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 19:27:54.933 UTC
# % No such configuration item(s)
#
#

- name: Merge provided LLDP configuration with the existing configuration
  cisco.iosxr.iosxr_lldp_global:
    config:
      holdtime: 100
      reinit: 2
      timer: 3000
      subinterfaces: true
      tlv_select:
        management_address: false
        system_description: false
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {}
#
#  "commands": [
#        "lldp subinterfaces enable",
#        "lldp holdtime 100",
#        "lldp reinit 2",
#        "lldp tlv-select system-description disable",
#        "lldp tlv-select management-address disable",
#        "lldp timer 3000"
#  ]
#
#  "after": {
#        "holdtime": 100,
#        "reinit": 2,
#        "subinterfaces": true,
#        "timer": 3000,
#        "tlv_select": {
#            "management_address": false,
#            "system_description": false
#        }
#  }
#
#
# ------------
# After state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:31:10.587 UTC
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !
#
#


# Using replaced
#
#
# -------------
# Before State
# -------------
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:31:10.587 UTC
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !
#
#

- name: Replace existing LLDP device configuration with provided configuration
  cisco.iosxr.iosxr_lldp_global:
    config:
      holdtime: 100
      tlv_select:
        port_description: false
        system_description: true
        management_description: true
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#        "holdtime": 100,
#        "reinit": 2,
#        "subinterfaces": true,
#        "timer": 3000,
#        "tlv_select": {
#            "management_address": false,
#            "system_description": false
#        }
#  }
#
#  "commands": [
#        "no lldp reinit 2",
#        "no lldp subinterfaces enable",
#        "no lldp timer 3000",
#        "no lldp tlv-select management-address disable",
#        "no lldp tlv-select system-description disable",
#        "lldp tlv-select port-description disable"
#  ]
#
#  "after": {
#        "holdtime": 100,
#        "tlv_select": {
#            "port_description": false
#        }
#  }
#
#
# ------------
# After state
# ------------
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:53:08.407 UTC
# lldp
#  holdtime 100
#  tlv-select
#   port-description disable
#  !
# !
#
#


# Using deleted
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:31:10.587 UTC
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !
#
#

- name: Deleted existing LLDP configurations from the device
  cisco.iosxr.iosxr_lldp_global:
    state: deleted

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#        "holdtime": 100,
#        "reinit": 2,
#        "subinterfaces": true,
#        "timer": 3000,
#        "tlv_select": {
#            "management_address": false,
#            "system_description": false
#        }
#  },
#
#  "commands": [
#        "no lldp holdtime 100",
#        "no lldp reinit 2",
#        "no lldp subinterfaces enable",
#        "no lldp timer 3000",
#        "no lldp tlv-select management-address disable",
#        "no lldp tlv-select system-description disable"
#  ]
#
#  "after": {}
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:38:31.187 UTC
# lldp
# !
#
# Using parsed:

# parsed.cfg
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !

- name: Convert lldp global config to argspec without connecting to the appliance
  cisco.iosxr.iosxr_lldp_global:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# ------------------------
# Module Execution Result
# ------------------------
# parsed:
#     holdtime: 100
#     reinit: 2
#     timer: 3000
#     subinterfaces: True
#     tlv_select:
#       management_address: False
#       system_description: False

# using gathered:

# Device config:
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !

- name: Gather IOSXR lldp global configuration
  cisco.iosxr.iosxr_lldp_global:
    config:
    state: gathered


# ------------------------
# Module Execution Result
# ------------------------
# gathered:
#     holdtime: 100
#     reinit: 2
#     timer: 3000
#     subinterfaces: True
#     tlv_select:
#       management_address: False
#       system_description: False

# using rendered:

- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_lldp_global:
    config:
      holdtime: 100
      reinit: 2
      timer: 3000
      subinterfaces: true
      tlv_select:
        management_address: false
        system_description: false
    state: rendered

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "rendered": [
#        "lldp subinterfaces enable",
#        "lldp holdtime 100",
#        "lldp reinit 2",
#        "lldp tlv-select system-description disable",
#        "lldp tlv-select management-address disable",
#        "lldp timer 3000"
#  ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The configuration as structured data after module completion.

Returned: when changed

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

before

dictionary

The configuration as structured data prior to module invocation.

Returned: always

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["lldp subinterfaces enable", "lldp holdtime 100", "no lldp tlv-select management-address disable"]

Authors

  • Nilashish Chakraborty (@NilashishC)