ansible.utils.consolidate filter – Consolidate facts together on common attributes.
Note
This filter plugin is part of the ansible.utils collection (version 2.12.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install ansible.utils.
To use it in a playbook, specify: ansible.utils.consolidate.
New in ansible.utils 2.6.0
Synopsis
This plugin presents collective structured data including all supplied facts grouping on common attributes mentioned.
All other boolean parameter defaults to False unless parameters is explicitly mentioned.
Using the parameters below-
data_sources|ansible.utils.consolidate(fail_missing_match_key=False))
Keyword parameters
This describes keyword parameters of the filter. These are the values key1=value1, key2=value2 and so on in the following
example: input | ansible.utils.consolidate(key1=value1, key2=value2, ...)
Parameter |
Comments |
|---|---|
This option represents a list of dictionaries to perform the operation on. For example |
|
Specify facts data that gets consolidated. |
|
Specify key to match on. |
|
Specify the name with which the result set be created. |
|
Fail if the match key’s value exists more than once in a given data set. Choices:
|
|
Fail if match_key is not found in a specific data set. Choices:
|
|
Fail if the match key’s value is not found in every data source. Choices:
|
Examples
# Consolidated filter plugin example
# ----------------------------------
# play.yml
- name: Define some test data
ansible.builtin.set_fact:
values:
- name: a
value: 1
- name: b
value: 2
- name: c
value: 3
colors:
- name: a
color: red
- name: b
color: green
- name: c
color: blue
- name: Define some test data
ansible.builtin.set_fact:
base_data:
- data: '{{ values }}'
match_key: name
name: values
- data: '{{ colors }}'
match_key: name
name: colors
- name: Consolidate the data source using the name key
ansible.builtin.set_fact:
consolidated: '{{ data_sources|ansible.utils.consolidate }}'
vars:
sizes:
- name: a
size: small
- name: b
size: medium
- name: c
size: large
additional_data_source:
- data: '{{ sizes }}'
match_key: name
name: sizes
data_sources: '{{ base_data + additional_data_source }}'
# Output
# ok: [localhost] => {
# "ansible_facts": {
# "consolidated": {
# "a": {
# "colors": {
# "color": "red",
# "name": "a"
# },
# "sizes": {
# "name": "a",
# "size": "small"
# },
# "values": {
# "name": "a",
# "value": 1
# }
# },
# "b": {
# "colors": {
# "color": "green",
# "name": "b"
# },
# "sizes": {
# "name": "b",
# "size": "medium"
# },
# "values": {
# "name": "b",
# "value": 2
# }
# },
# "c": {
# "colors": {
# "color": "blue",
# "name": "c"
# },
# "sizes": {
# "name": "c",
# "size": "large"
# },
# "values": {
# "name": "c",
# "value": 3
# }
# }
# }
# },
# "changed": false
# }
- name: Consolidate the data source using different keys
ansible.builtin.set_fact: null
consolidated: '{{ data_sources|ansible.utils.consolidate }}'
vars:
sizes:
- title: a
size: small
- title: b
size: medium
- title: c
size: large
additional_data_source:
- data: '{{ sizes }}'
match_key: title
name: sizes
data_sources: '{{ base_data + additional_data_source }}'
# Output
# ok: [localhost] => {
# "ansible_facts": {
# "consolidated": {
# "a": {
# "colors": {
# "color": "red",
# "name": "a"
# },
# "sizes": {
# "size": "small",
# "title": "a"
# },
# "values": {
# "name": "a",
# "value": 1
# }
# },
# "b": {
# "colors": {
# "color": "green",
# "name": "b"
# },
# "sizes": {
# "size": "medium",
# "title": "b"
# },
# "values": {
# "name": "b",
# "value": 2
# }
# },
# "c": {
# "colors": {
# "color": "blue",
# "name": "c"
# },
# "sizes": {
# "size": "large",
# "title": "c"
# },
# "values": {
# "name": "c",
# "value": 3
# }
# }
# }
# },
# "changed": false
# }
- name: Consolidate the data source using the name key (fail_missing_match_key)
ansible.builtin.set_fact: null
consolidated: '{{ data_sources|ansible.utils.consolidate(fail_missing_match_key=True) }}'
ignore_errors: true
vars:
sizes:
- size: small
- size: medium
- size: large
additional_data_source:
- data: '{{ sizes }}'
match_key: name
name: sizes
data_sources: '{{ base_data + additional_data_source }}'
# Output
# fatal: [localhost]: FAILED! => {
# "msg": "Error when using plugin 'consolidate': 'fail_missing_match_key'
# reported missing match key 'name' in data source 3 in list entry 1,
# missing match key 'name' in data source 3 in list entry 2,
# missing match key 'name' in data source 3 in list entry 3"
# }
- name: Consolidate the data source using the name key (fail_missing_match_value)
ansible.builtin.set_fact:
consolidated: "{{ data_sources|ansible.utils.consolidate(fail_missing_match_value=True) }}"
ignore_errors: true
vars:
sizes:
- name: a
size: small
- name: b
size: medium
additional_data_source:
- data: "{{ sizes }}"
match_key: name
name: sizes
data_sources: "{{ base_data + additional_data_source }}"
# fatal: [localhost]: FAILED! => {
# "msg": "Error when using plugin 'consolidate': 'fail_missing_match_value'
# reported missing match value c in data source 3"
# }
- name: Consolidate the data source using the name key (fail_duplicate)
ansible.builtin.set_fact:
consolidated: "{{ data_sources|ansible.utils.consolidate(fail_duplicate=True) }}"
ignore_errors: true
vars:
sizes:
- name: a
size: small
- name: a
size: small
additional_data_source:
- data: "{{ sizes }}"
match_key: name
name: sizes
data_sources: "{{ base_data + additional_data_source }}"
# fatal: [localhost]: FAILED! => {
# "msg": "Error when using plugin 'consolidate': 'fail_duplicate'
# reported duplicate values in data source 3"
# }
# facts.yml
# interfaces:
# - name: GigabitEthernet0/0
# enabled: true
# duplex: auto
# speed: auto
# note:
# - Connected green wire
# - name: GigabitEthernet0/1
# description: Configured by Ansible - Interface 1
# mtu: 1500
# speed: auto
# duplex: auto
# enabled: true
# note:
# - Connected blue wire
# - Configured by Paul
# vifs:
# - vlan_id: 100
# description: Eth1 - VIF 100
# mtu: 400
# enabled: true
# comment: Needs reconfiguration
# - vlan_id: 101
# description: Eth1 - VIF 101
# enabled: true
# - name: GigabitEthernet0/2
# description: Configured by Ansible - Interface 2 (ADMIN DOWN)
# mtu: 600
# enabled: false
# l2_interfaces:
# - name: GigabitEthernet0/0
# - mode: access
# name: GigabitEthernet0/1
# trunk:
# allowed_vlans:
# - "11"
# - "12"
# - "59"
# - "67"
# - "75"
# - "77"
# - "81"
# - "100"
# - 400-408
# - 411-413
# - "415"
# - "418"
# - "982"
# - "986"
# - "988"
# - "993"
# - mode: trunk
# name: GigabitEthernet0/2
# trunk:
# allowed_vlans:
# - "11"
# - "12"
# - "59"
# - "67"
# - "75"
# - "77"
# - "81"
# - "100"
# - 400-408
# - 411-413
# - "415"
# - "418"
# - "982"
# - "986"
# - "988"
# - "993"
# encapsulation: dot1q
# l3_interfaces:
# - ipv4:
# - address: 192.168.0.2/24
# name: GigabitEthernet0/0
# - name: GigabitEthernet0/1
# - name: GigabitEthernet0/2
# - name: Loopback888
# - name: Loopback999
# Playbook
- name: Build the facts collection
set_fact:
data_sources:
- data: '{{ interfaces }}'
match_key: name
name: interfaces
- data: '{{ l2_interfaces }}'
match_key: name
name: l2_interfaces
- data: '{{ l3_interfaces }}'
match_key: name
name: l3_interfaces
- name: Combine all the facts based on match_keys
set_fact:
combined: >-
{{ data_sources|ansible.utils.consolidate(fail_missing_match_value=False)
}}
# Output
# ok: [localhost] => {
# "ansible_facts": {
# "data_sources": [
# {
# "data": [
# {
# "duplex": "auto",
# "enabled": true,
# "name": "GigabitEthernet0/0",
# "note": [
# "Connected green wire"
# ],
# "speed": "auto"
# },
# {
# "description": "Configured by Ansible - Interface 1",
# "duplex": "auto",
# "enabled": true,
# "mtu": 1500,
# "name": "GigabitEthernet0/1",
# "note": [
# "Connected blue wire",
# "Configured by Paul"
# ],
# "speed": "auto",
# "vifs": [
# {
# "comment": "Needs reconfiguration",
# "description": "Eth1 - VIF 100",
# "enabled": true,
# "mtu": 400,
# "vlan_id": 100
# },
# {
# "description": "Eth1 - VIF 101",
# "enabled": true,
# "vlan_id": 101
# }
# ]
# },
# {
# "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
# "enabled": false,
# "mtu": 600,
# "name": "GigabitEthernet0/2"
# }
# ],
# "match_key": "name",
# "name": "interfaces"
# },
# {
# "data": [
# {
# "name": "GigabitEthernet0/0"
# },
# {
# "mode": "access",
# "name": "GigabitEthernet0/1",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ]
# }
# },
# {
# "mode": "trunk",
# "name": "GigabitEthernet0/2",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ],
# "encapsulation": "dot1q"
# }
# }
# ],
# "match_key": "name",
# "name": "l2_interfaces"
# },
# {
# "data": [
# {
# "ipv4": [
# {
# "address": "192.168.0.2/24"
# }
# ],
# "name": "GigabitEthernet0/0"
# },
# {
# "name": "GigabitEthernet0/1"
# },
# {
# "name": "GigabitEthernet0/2"
# },
# {
# "name": "Loopback888"
# },
# {
# "name": "Loopback999"
# }
# ],
# "match_key": "name",
# "name": "l3_interfaces"
# }
# ]
# },
# "changed": false
# }
# Read vars_file 'facts.yml'
# TASK [Combine all the facts based on match_keys]
# ok: [localhost] => {
# "ansible_facts": {
# "combined": {
# "GigabitEthernet0/0": {
# "interfaces": {
# "duplex": "auto",
# "enabled": true,
# "name": "GigabitEthernet0/0",
# "note": [
# "Connected green wire"
# ],
# "speed": "auto"
# },
# "l2_interfaces": {
# "name": "GigabitEthernet0/0"
# },
# "l3_interfaces": {
# "ipv4": [
# {
# "address": "192.168.0.2/24"
# }
# ],
# "name": "GigabitEthernet0/0"
# }
# },
# "GigabitEthernet0/1": {
# "interfaces": {
# "description": "Configured by Ansible - Interface 1",
# "duplex": "auto",
# "enabled": true,
# "mtu": 1500,
# "name": "GigabitEthernet0/1",
# "note": [
# "Connected blue wire",
# "Configured by Paul"
# ],
# "speed": "auto",
# "vifs": [
# {
# "comment": "Needs reconfiguration",
# "description": "Eth1 - VIF 100",
# "enabled": true,
# "mtu": 400,
# "vlan_id": 100
# },
# {
# "description": "Eth1 - VIF 101",
# "enabled": true,
# "vlan_id": 101
# }
# ]
# },
# "l2_interfaces": {
# "mode": "access",
# "name": "GigabitEthernet0/1",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ]
# }
# },
# "l3_interfaces": {
# "name": "GigabitEthernet0/1"
# }
# },
# "GigabitEthernet0/2": {
# "interfaces": {
# "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
# "enabled": false,
# "mtu": 600,
# "name": "GigabitEthernet0/2"
# },
# "l2_interfaces": {
# "mode": "trunk",
# "name": "GigabitEthernet0/2",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ],
# "encapsulation": "dot1q"
# }
# },
# "l3_interfaces": {
# "name": "GigabitEthernet0/2"
# }
# },
# "Loopback888": {
# "interfaces": {},
# "l2_interfaces": {},
# "l3_interfaces": {
# "name": "Loopback888"
# }
# },
# "Loopback999": {
# "interfaces": {},
# "l2_interfaces": {},
# "l3_interfaces": {
# "name": "Loopback999"
# }
# }
# }
# },
# "changed": false
# }
# Failing on missing match values
# -------------------------------
# facts.yaml
# interfaces:
# - name: GigabitEthernet0/0
# enabled: true
# duplex: auto
# speed: auto
# note:
# - Connected green wire
# - name: GigabitEthernet0/1
# description: Configured by Ansible - Interface 1
# mtu: 1500
# speed: auto
# duplex: auto
# enabled: true
# note:
# - Connected blue wire
# - Configured by Paul
# vifs:
# - vlan_id: 100
# description: Eth1 - VIF 100
# mtu: 400
# enabled: true
# comment: Needs reconfiguration
# - vlan_id: 101
# description: Eth1 - VIF 101
# enabled: true
# - name: GigabitEthernet0/2
# description: Configured by Ansible - Interface 2 (ADMIN DOWN)
# mtu: 600
# enabled: false
# l2_interfaces:
# - name: GigabitEthernet0/0
# - mode: access
# name: GigabitEthernet0/1
# trunk:
# allowed_vlans:
# - "11"
# - "12"
# - "59"
# - "67"
# - "75"
# - "77"
# - "81"
# - "100"
# - 400-408
# - 411-413
# - "415"
# - "418"
# - "982"
# - "986"
# - "988"
# - "993"
# - mode: trunk
# name: GigabitEthernet0/2
# trunk:
# allowed_vlans:
# - "11"
# - "12"
# - "59"
# - "67"
# - "75"
# - "77"
# - "81"
# - "100"
# - 400-408
# - 411-413
# - "415"
# - "418"
# - "982"
# - "986"
# - "988"
# - "993"
# encapsulation: dot1q
# l3_interfaces:
# - ipv4:
# - address: 192.168.0.2/24
# name: GigabitEthernet0/0
# - name: GigabitEthernet0/1
# - name: GigabitEthernet0/2
# - name: Loopback888
# - name: Loopback999
# Playbook
- name: Build the facts collection
set_fact:
data_sources:
- data: '{{ interfaces }}'
match_key: name
name: interfaces
- data: '{{ l2_interfaces }}'
match_key: name
name: l2_interfaces
- data: '{{ l3_interfaces }}'
match_key: name
name: l3_interfaces
- name: Combine all the facts based on match_keys
set_fact:
combined: >-
{{ data_sources|ansible.utils.consolidate(fail_missing_match_value=True)
}}
# Output
# ok: [localhost] => {
# "ansible_facts": {
# "data_sources": [
# {
# "data": [
# {
# "duplex": "auto",
# "enabled": true,
# "name": "GigabitEthernet0/0",
# "note": [
# "Connected green wire"
# ],
# "speed": "auto"
# },
# {
# "description": "Configured by Ansible - Interface 1",
# "duplex": "auto",
# "enabled": true,
# "mtu": 1500,
# "name": "GigabitEthernet0/1",
# "note": [
# "Connected blue wire",
# "Configured by Paul"
# ],
# "speed": "auto",
# "vifs": [
# {
# "comment": "Needs reconfiguration",
# "description": "Eth1 - VIF 100",
# "enabled": true,
# "mtu": 400,
# "vlan_id": 100
# },
# {
# "description": "Eth1 - VIF 101",
# "enabled": true,
# "vlan_id": 101
# }
# ]
# },
# {
# "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
# "enabled": false,
# "mtu": 600,
# "name": "GigabitEthernet0/2"
# }
# ],
# "match_key": "name",
# "name": "interfaces"
# },
# {
# "data": [
# {
# "name": "GigabitEthernet0/0"
# },
# {
# "mode": "access",
# "name": "GigabitEthernet0/1",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ]
# }
# },
# {
# "mode": "trunk",
# "name": "GigabitEthernet0/2",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ],
# "encapsulation": "dot1q"
# }
# }
# ],
# "match_key": "name",
# "name": "l2_interfaces"
# },
# {
# "data": [
# {
# "ipv4": [
# {
# "address": "192.168.0.2/24"
# }
# ],
# "name": "GigabitEthernet0/0"
# },
# {
# "name": "GigabitEthernet0/1"
# },
# {
# "name": "GigabitEthernet0/2"
# },
# {
# "name": "Loopback888"
# },
# {
# "name": "Loopback999"
# }
# ],
# "match_key": "name",
# "name": "l3_interfaces"
# }
# ]
# },
# "changed": false
# }
# Read vars_file 'facts.yml'
# TASK [Combine all the facts based on match_keys]
# fatal: [localhost]: FAILED! => {
# "msg": "Error when using plugin 'consolidate': 'fail_missing_match_value' reported Missing match value Loopback999,
# Loopback888 in data source 0, Missing match value Loopback999, Loopback888 in data source 1"
# }
# Failing on missing match keys
# -----------------------------
# facts.yaml
# interfaces:
# - name: GigabitEthernet0/0
# enabled: true
# duplex: auto
# speed: auto
# note:
# - Connected green wire
# - name: GigabitEthernet0/1
# description: Configured by Ansible - Interface 1
# mtu: 1500
# speed: auto
# duplex: auto
# enabled: true
# note:
# - Connected blue wire
# - Configured by Paul
# vifs:
# - vlan_id: 100
# description: Eth1 - VIF 100
# mtu: 400
# enabled: true
# comment: Needs reconfiguration
# - vlan_id: 101
# description: Eth1 - VIF 101
# enabled: true
# - name: GigabitEthernet0/2
# description: Configured by Ansible - Interface 2 (ADMIN DOWN)
# mtu: 600
# enabled: false
# l2_interfaces:
# - name: GigabitEthernet0/0
# - mode: access
# name: GigabitEthernet0/1
# trunk:
# allowed_vlans:
# - "11"
# - "12"
# - "59"
# - "67"
# - "75"
# - "77"
# - "81"
# - "100"
# - 400-408
# - 411-413
# - "415"
# - "418"
# - "982"
# - "986"
# - "988"
# - "993"
# - mode: trunk
# name: GigabitEthernet0/2
# trunk:
# allowed_vlans:
# - "11"
# - "12"
# - "59"
# - "67"
# - "75"
# - "77"
# - "81"
# - "100"
# - 400-408
# - 411-413
# - "415"
# - "418"
# - "982"
# - "986"
# - "988"
# - "993"
# encapsulation: dot1q
# l3_interfaces:
# - ipv4:
# - address: 192.168.0.2/24
# inft_name: GigabitEthernet0/0
# - inft_name: GigabitEthernet0/1
# - inft_name: GigabitEthernet0/2
# - inft_name: Loopback888
# - inft_name: Loopback999
# Playbook
- name: Build the facts collection
set_fact:
data_sources:
- data: '{{ interfaces }}'
match_key: name
name: interfaces
- data: '{{ l2_interfaces }}'
match_key: name
name: l2_interfaces
- data: '{{ l3_interfaces }}'
match_key: name
name: l3_interfaces
- name: Combine all the facts based on match_keys
set_fact:
combined: '{{ data_sources|ansible.utils.consolidate(fail_missing_match_key=True) }}'
# Output
# ok: [localhost] => {
# "ansible_facts": {
# "data_sources": [
# {
# "data": [
# {
# "duplex": "auto",
# "enabled": true,
# "name": "GigabitEthernet0/0",
# "note": [
# "Connected green wire"
# ],
# "speed": "auto"
# },
# {
# "description": "Configured by Ansible - Interface 1",
# "duplex": "auto",
# "enabled": true,
# "mtu": 1500,
# "name": "GigabitEthernet0/1",
# "note": [
# "Connected blue wire",
# "Configured by Paul"
# ],
# "speed": "auto",
# "vifs": [
# {
# "comment": "Needs reconfiguration",
# "description": "Eth1 - VIF 100",
# "enabled": true,
# "mtu": 400,
# "vlan_id": 100
# },
# {
# "description": "Eth1 - VIF 101",
# "enabled": true,
# "vlan_id": 101
# }
# ]
# },
# {
# "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
# "enabled": false,
# "mtu": 600,
# "name": "GigabitEthernet0/2"
# }
# ],
# "match_key": "name",
# "name": "interfaces"
# },
# {
# "data": [
# {
# "name": "GigabitEthernet0/0"
# },
# {
# "mode": "access",
# "name": "GigabitEthernet0/1",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ]
# }
# },
# {
# "mode": "trunk",
# "name": "GigabitEthernet0/2",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ],
# "encapsulation": "dot1q"
# }
# }
# ],
# "match_key": "name",
# "name": "l2_interfaces"
# },
# {
# "data": [
# {
# "inft_name": "GigabitEthernet0/0",
# "ipv4": [
# {
# "address": "192.168.0.2/24"
# }
# ]
# },
# {
# "inft_name": "GigabitEthernet0/1"
# },
# {
# "inft_name": "GigabitEthernet0/2"
# },
# {
# "inft_name": "Loopback888"
# },
# {
# "inft_name": "Loopback999"
# }
# ],
# "match_key": "name",
# "name": "l3_interfaces"
# }
# ]
# },
# "changed": false
# }
# Read vars_file 'facts.yml'
# TASK [Combine all the facts based on match_keys]
# fatal: [localhost]: FAILED! => {
# "msg": "Error when using plugin 'consolidate': 'fail_missing_match_key' reported Missing match
# key 'name' in data source 2 in list entry 0, Missing match key 'name' in data
# source 2 in list entry 1, Missing match key 'name' in data source 2 in list
# entry 2, Missing match key 'name' in data source 2 in list entry 3, Missing
# match key 'name' in data source 2 in list entry 4"
# }
# Failing on duplicate values in facts
# ------------------------------------
# facts.yaml
# interfaces:
# - name: GigabitEthernet0/0
# enabled: true
# duplex: auto
# speed: auto
# note:
# - Connected green wire
# - name: GigabitEthernet0/1
# description: Configured by Ansible - Interface 1
# mtu: 1500
# speed: auto
# duplex: auto
# enabled: true
# note:
# - Connected blue wire
# - Configured by Paul
# vifs:
# - vlan_id: 100
# description: Eth1 - VIF 100
# mtu: 400
# enabled: true
# comment: Needs reconfiguration
# - vlan_id: 101
# description: Eth1 - VIF 101
# enabled: true
# - name: GigabitEthernet0/2
# description: Configured by Ansible - Interface 2 (ADMIN DOWN)
# mtu: 600
# enabled: false
# l2_interfaces:
# - name: GigabitEthernet0/0
# - name: GigabitEthernet0/0
# - mode: access
# name: GigabitEthernet0/1
# trunk:
# allowed_vlans:
# - "11"
# - "12"
# - "59"
# - "67"
# - "75"
# - "77"
# - "81"
# - "100"
# - 400-408
# - 411-413
# - "415"
# - "418"
# - "982"
# - "986"
# - "988"
# - "993"
# - mode: trunk
# name: GigabitEthernet0/2
# trunk:
# allowed_vlans:
# - "11"
# - "12"
# - "59"
# - "67"
# - "75"
# - "77"
# - "81"
# - "100"
# - 400-408
# - 411-413
# - "415"
# - "418"
# - "982"
# - "986"
# - "988"
# - "993"
# encapsulation: dot1q
# l3_interfaces:
# - ipv4:
# - address: 192.168.0.2/24
# name: GigabitEthernet0/0
# - name: GigabitEthernet0/1
# - name: GigabitEthernet0/2
# - name: Loopback888
# - name: Loopback999
# Playbook
- name: Build the facts collection
set_fact:
data_sources:
- data: '{{ interfaces }}'
match_key: name
name: interfaces
- data: '{{ l2_interfaces }}'
match_key: name
name: l2_interfaces
- data: '{{ l3_interfaces }}'
match_key: name
name: l3_interfaces
- name: Combine all the facts based on match_keys
set_fact:
combined: '{{ data_sources|ansible.utils.consolidate(fail_duplicate=True) }}'
# Output
# ok: [localhost] => {
# "ansible_facts": {
# "data_sources": [
# {
# "data": [
# {
# "duplex": "auto",
# "enabled": true,
# "name": "GigabitEthernet0/0",
# "note": [
# "Connected green wire"
# ],
# "speed": "auto"
# },
# {
# "description": "Configured by Ansible - Interface 1",
# "duplex": "auto",
# "enabled": true,
# "mtu": 1500,
# "name": "GigabitEthernet0/1",
# "note": [
# "Connected blue wire",
# "Configured by Paul"
# ],
# "speed": "auto",
# "vifs": [
# {
# "comment": "Needs reconfiguration",
# "description": "Eth1 - VIF 100",
# "enabled": true,
# "mtu": 400,
# "vlan_id": 100
# },
# {
# "description": "Eth1 - VIF 101",
# "enabled": true,
# "vlan_id": 101
# }
# ]
# },
# {
# "description": "Configured by Ansible - Interface 2 (ADMIN DOWN)",
# "enabled": false,
# "mtu": 600,
# "name": "GigabitEthernet0/2"
# }
# ],
# "match_key": "name",
# "name": "interfaces"
# },
# {
# "data": [
# {
# "name": "GigabitEthernet0/0"
# },
# {
# "name": "GigabitEthernet0/0"
# },
# {
# "mode": "access",
# "name": "GigabitEthernet0/1",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ]
# }
# },
# {
# "mode": "trunk",
# "name": "GigabitEthernet0/2",
# "trunk": {
# "allowed_vlans": [
# "11",
# "12",
# "59",
# "67",
# "75",
# "77",
# "81",
# "100",
# "400-408",
# "411-413",
# "415",
# "418",
# "982",
# "986",
# "988",
# "993"
# ],
# "encapsulation": "dot1q"
# }
# }
# ],
# "match_key": "name",
# "name": "l2_interfaces"
# },
# {
# "data": [
# {
# "ipv4": [
# {
# "address": "192.168.0.2/24"
# }
# ],
# "name": "GigabitEthernet0/0"
# },
# {
# "name": "GigabitEthernet0/1"
# },
# {
# "name": "GigabitEthernet0/2"
# },
# {
# "name": "Loopback888"
# },
# {
# "name": "Loopback999"
# }
# ],
# "match_key": "name",
# "name": "l3_interfaces"
# }
# ]
# },
# "changed": false
# }
# Read vars_file 'facts.yml'
# TASK [Combine all the facts based on match_keys]
# fatal: [localhost]: FAILED! => {
# "msg": "Error when using plugin 'consolidate': 'fail_duplicate' reported Duplicate values in data source 1"
# }