arista.eos.eos_l3_interfaces module – L3 interfaces resource module
Note
This module is part of the arista.eos collection (version 10.0.1).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install arista.eos.
To use it in a playbook, specify: arista.eos.eos_l3_interfaces.
New in arista.eos 1.0.0
Synopsis
This module provides declarative management of Layer 3 interfaces on Arista EOS devices.
Aliases: l3_interfaces
Parameters
Parameter |
Comments |
|---|---|
A dictionary of Layer 3 interface options |
|
List of IPv4 addresses to be set for the Layer 3 interface mentioned in name option. |
|
IPv4 address to be set in the format <ipv4 address>/<mask> eg. 192.0.2.1/24, or |
|
Whether or not this address is a secondary address. Choices:
|
|
Whether or not this address is a virtual address. Choices:
|
|
List of IPv6 addresses to be set for the Layer 3 interface mentioned in name option. |
|
IPv6 address to be set in the address format is <ipv6 address>/<mask> eg. 2001:db8:2201:1::1/64 or |
|
Full name of the interface, i.e. Ethernet1. |
|
This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section ^interface. The state parsed reads the configuration from |
|
The state of the configuration after module completion Choices:
|
Notes
Note
Tested against Arista EOS 4.24.6F
This module works with connection
network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_eos.html ‘eos_l2_interfaces/eos_interfaces’ should be used for preparing the interfaces, before applying L3 configurations using this module (eos_l3_interfaces).
Examples
# Using merged
# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
# description Configured by Ansible
# shutdown
# !
# interface Management1
# ip address dhcp
# dhcp client accept default-route
- name: Merge provided configuration with device configuration.
arista.eos.eos_l3_interfaces:
config:
- name: Ethernet1
ipv4:
- address: 198.51.100.14/24
- name: Ethernet2
ipv4:
- address: 203.0.113.27/24
state: merged
# Task Output
# -----------
#
# before:
# - name: Ethernet1
# - name: Ethernet2
# - ipv4:
# - address: dhcp
# name: Management1
# commands:
# - interface Ethernet1
# - ip address 198.51.100.14/24
# - interface Ethernet2
# - ip address 203.0.113.27/24
# after:
# - ipv4:
# - address: 198.51.100.14/24
# name: Ethernet1
# - ipv4:
# - address: 203.0.113.27/24
# name: Ethernet2
# - ipv4:
# - address: dhcp
# name: Management1
# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# ip address 198.51.100.14/24
# !
# interface Ethernet2
# description Configured by Ansible
# shutdown
# ip address 203.0.113.27/24
# !
# interface Management1
# ip address dhcp
# dhcp client accept default-route
# Using overridden
# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# ip address 198.51.100.14/24
# !
# interface Ethernet2
# ip address 203.0.113.27/24
# !
# interface Management1
# ip address dhcp
# dhcp client accept default-route
- name: Override device configuration of all L2 interfaces on device with provided
configuration.
arista.eos.eos_l3_interfaces:
config:
- name: Ethernet1
ipv6:
- address: 2001:db8:feed::1/96
- name: Ethernet2
ipv4:
- address: 203.0.113.27/24
- ipv4:
- address: dhcp
name: Management1
state: overridden
# Task Output
# -----------
#
# before:
# - ipv4:
# - address: 198.51.100.14/24
# name: Ethernet1
# - ipv4:
# - address: 203.0.113.27/24
# name: Ethernet2
# - ipv4:
# - address: dhcp
# name: Management1
# commands:
# - interface Ethernet1
# - ipv6 address 2001:db8:feed::1/96
# - no ip address
# after:
# - ipv6:
# - address: 2001:db8:feed::1/96
# name: Ethernet1
# - ipv4:
# - address: 203.0.113.27/24
# name: Ethernet2
# - ipv4:
# - address: dhcp
# name: Management1
# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# ipv6 address 2001:db8:feed::1/96
# !
# interface Ethernet2
# ip address 203.0.113.27/24
# !
# interface Management1
# ip address dhcp
# dhcp client accept default-route
# Using replaced
# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# ipv6 address 2001:db8:feed::1/96
# !
# interface Ethernet2
# ip address 203.0.113.27/24
# !
# interface Management1
# ip address dhcp
# dhcp client accept default-route
- name: Replace device configuration of specified L2 interfaces with provided configuration.
arista.eos.eos_l3_interfaces:
config:
- name: Ethernet2
ipv4:
- address: 203.0.113.27/24
state: replaced
# Task Output
# -----------
#
# before:
# - ipv6:
# - address: 2001:db8:feed::1/96
# name: Ethernet1
# - ipv4:
# - address: 203.0.113.27/24
# name: Ethernet2
# - ipv4:
# - address: dhcp
# name: Management1
# commands:
# - interface Ethernet2
# - ip address 203.0.113.28/24
# after:
# - ipv6:
# - address: 2001:db8:feed::1/96
# name: Ethernet1
# - ipv4:
# - address: 203.0.113.28/24
# name: Ethernet2
# - ipv4:
# - address: dhcp
# name: Management1
# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# ipv6 address 2001:db8:feed::1/96
# !
# interface Ethernet2
# ip address 203.0.113.28/24
# !
# interface Management1
# ip address dhcp
# dhcp client accept default-route
# Using deleted
# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# ipv6 address 2001:db8:feed::1/96
# !
# interface Ethernet2
# ip address 203.0.113.28/24
# !
# interface Management1
# ip address dhcp
# dhcp client accept default-route
- name: Delete L3 attributes of given interfaces.
arista.eos.eos_l3_interfaces:
config:
- name: Ethernet1
- name: Ethernet2
state: deleted
# Task Output
# -----------
#
# before:
# - ipv6:
# - address: 2001:db8:feed::1/96
# name: Ethernet1
# - ipv4:
# - address: 203.0.113.28/24
# name: Ethernet2
# - ipv4:
# - address: dhcp
# name: Management1
# commands:
# - interface Ethernet1
# - no ipv6 address 2001:db8:feed::1/96
# - interface Ethernet2
# - no ip address
# after:
# - name: Ethernet1
# - name: Ethernet2
# - ipv4:
# - address: dhcp
# name: Management1
# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
# !
# interface Management1
# ip address dhcp
# dhcp client accept default-route
# Using Parsed
# File: parsed.cfg
# ----------------
#
# veos#show running-config | section interface
# interface Ethernet1
# ip address 198.51.100.14/24
# !
# interface Ethernet2
# ip address 203.0.113.27/24
# !
- name: Use parsed to convert native configs to structured data
arista.eos.interfaces:
running_config: "{{ lookup('file', 'parsed.cfg') }}"
state: parsed
# Module Execution Result:
# ------------------------
#
# parsed:
# - name: Ethernet1
# ipv4:
# - address: 198.51.100.14/24
# - name: Ethernet2
# ipv4:
# - address: 203.0.113.27/24
# Using rendered:
- name: Use Rendered to convert the structured data to native config
arista.eos.eos_l3_interfaces:
config:
- name: Ethernet1
ipv4:
- address: 198.51.100.14/24
- name: Ethernet2
ipv4:
- address: 203.0.113.27/24
state: rendered
# Module Execution Result:
# ------------------------
#
# rendered:
# - interface Ethernet1
# - ip address 198.51.100.14/24
# - interface Ethernet2
# - ip address 203.0.113.27/24
# using gathered:
# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# ip address 198.51.100.14/24
# !
# interface Ethernet2
# ip address 203.0.113.27/24
# !
- name: Gather l3 interfaces facts from the device
arista.eos.l3_interfaces:
state: gathered
# Module Execution Result:
# ------------------------
#
# gathered:
# - name: Ethernet1
# ipv4:
# - address: 198.51.100.14/24
# - name: Ethernet2
# ipv4:
# - address: 203.0.113.27/24
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The resulting configuration after module execution. Returned: when changed Sample: |
|
The configuration prior to the module execution. Returned: when state is Sample: |
|
The set of commands pushed to the remote device. Returned: when state is Sample: |
|
Facts about the network resource gathered from the remote device as structured data. Returned: when state is Sample: |
|
The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is Sample: |
|
The provided configuration in the task rendered in device-native format (offline). Returned: when state is Sample: |