arista.eos.eos_ntp_global module – Manages ntp resource module

Note

This module is part of the arista.eos collection (version 5.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_ntp_global.

New in version 3.1.0: of arista.eos

Synopsis

  • This module configures and manages the attributes of ntp on Arista EOS platforms.

Parameters

Parameter

Comments

config

dictionary

A dictionary of ntp options

authenticate

dictionary

Require authentication for NTP synchronization.

enable

boolean

Enable authentication for NTP synchronization.

Choices:

  • no

  • yes

servers

boolean

Authentication required only for incoming NTP server responses.

Choices:

  • no

  • yes

authentication_keys

list / elements=dictionary

Define a key to use for authentication.

algorithm

string

hash algorithm,

Choices:

  • md5

  • sha1

encryption

integer

key type

Choices:

  • 0

  • 7

id

integer

key identifier.

key

string

Unobfuscated key string.

local_interface

string

Configure the interface from which the IP source address is taken.

qos_dscp

integer

Set DSCP value in IP header

serve

dictionary

Configure the switch as an NTP server.

access_lists

list / elements=dictionary

Configure access control list.

acls

list / elements=dictionary

Access lists to be configured under the afi

acl_name

string

Name of the access list.

direction

string

direction for the packets.

Choices:

  • in

  • out

vrf

string

VRF in which to apply the access control list.

afi

string

ip/ipv6 config commands.

all

boolean

Service NTP requests received on any interface.

Choices:

  • no

  • yes

servers

list / elements=dictionary

Configure NTP server to synchronize to.

burst

boolean

Send a burst of packets instead of the usual one.

Choices:

  • no

  • yes

iburst

boolean

Send bursts of packets until the server is reached

Choices:

  • no

  • yes

key_id

integer

Set a key to use for authentication.

local_interface

string

Configure the interface from which the IP source address is taken.

maxpoll

integer

Maximum poll interval.

minpoll

integer

Minimum poll interval.

prefer

boolean

Mark this server as preferred.

Choices:

  • no

  • yes

server

string / required

Hostname or A.B.C.D or A:B:C:D:E:F:G:H.

source

string

Configure the interface from which the IP source address is taken.

version

integer

NTP version.

vrf

string

vrf name.

trusted_key

string

Configure the set of keys that are accepted for incoming messages

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the EOS device by executing the command show running-config | section ntp.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

The states replaced and overridden have identical behaviour for this module.

Please refer to examples for more details.

Choices:

  • deleted

  • merged ← (default)

  • overridden

  • replaced

  • gathered

  • rendered

  • parsed

Notes

Note

Examples

# Using merged

# Before state

# localhost(config)#show running-config | section ntp
# localhost(config)#

  - name: Merge provided configuration with device configuration
    arista.eos.eos_ntp_global:
      config:
        authenticate:
          enable: true
        authentication_keys:
          - id: 2
            algorithm: "sha1"
            encryption: 7
            key: "123456"
          - id: 23
            algorithm: "md5"
            encryption: 7
            key: "123456"
        local_interface: "Ethernet1"
        qos_dscp: 10
        trusted_key: 23
        servers:
          - server: "10.1.1.1"
            vrf: "vrf01"
            burst: True
            prefer: True
          - server: "25.1.1.1"
            vrf: "vrf01"
            maxpoll: 15
            key_id: 2
        serve:
          access_lists:
            - afi: "ip"
              acls:
                - acl_name: "acl01"
                  direction: "in"
            - afi: "ipv6"
              acls:
                 - acl_name: "acl02"
                   direction: "in"

# After State

# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#
#
#
# Module Execution:
# "after": {
#         "authenticate": {
#             "enable": true
#         },
#         "authentication_keys": [
#             {
#                 "algorithm": "sha1",
#                 "encryption": 7,
#                 "id": 2,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             },
#             {
#                 "algorithm": "md5",
#                 "encryption": 7,
#                 "id": 23,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             }
#         ],
#         "local_interface": "Ethernet1",
#         "qos_dscp": 10,
#         "serve": {
#             "access_lists": [
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl01",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ip"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl02",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ]
#         },
#         "servers": [
#             {
#                 "burst": true,
#                 "prefer": true,
#                 "server": "10.1.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "key_id": 2,
#                 "maxpoll": 15,
#                 "server": "25.1.1.1",
#                 "vrf": "vrf01"
#             }
#         ],
#         "trusted_key": "23"
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#         "ntp serve ip access-group acl01 in",
#         "ntp serve ipv6 access-group acl02 in",
#         "ntp authentication-key 2 sha1 7 ********",
#         "ntp authentication-key 23 md5 7 ********",
#         "ntp server vrf vrf01 10.1.1.1 burst prefer",
#         "ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#         "ntp authenticate",
#         "ntp local-interface Ethernet1",
#         "ntp qos dscp 10",
#         "ntp trusted-key 23"
#     ],

# Using Replaced

# Before State

# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#

  - name: Replace
    arista.eos.eos_ntp_global:
      config:
        qos_dscp: 15
        authentication_keys:
          - id: 2
            algorithm: "md5"
            encryption: 7
            key: "123456"
        servers:
          - server: "11.21.1.1"
            vrf: "vrf01"
            burst: True
            prefer: True
            minpoll: 13
        serve:
          access_lists:
            - afi: "ip"
              acls:
                - acl_name: "acl03"
                  direction: "in"
      state: replaced
# After State:
# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 md5 7 123456
# ntp qos dscp 15
# ntp server vrf vrf01 11.21.1.1 prefer burst minpoll 13
# ntp serve ip access-group acl03 in
# localhost(config)#
#
#
# Module Execution:
# "after": {
#        "authentication_keys": [
#            {
#                "algorithm": "md5",
#                "encryption": 7,
#                "id": 2,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            }
#        ],
#        "qos_dscp": 15,
#        "serve": {
#            "access_lists": [
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl03",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ip"
#                }
#            ]
#        },
#        "servers": [
#            {
#                "burst": true,
#                "minpoll": 13,
#                "prefer": true,
#                "server": "11.21.1.1",
#                "vrf": "vrf01"
#            }
#        ]
#    },
#    "before": {
#        "authenticate": {
#            "enable": true
#        },
#        "authentication_keys": [
#            {
#                "algorithm": "sha1",
#                "encryption": 7,
#                "id": 2,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            },
#            {
#                "algorithm": "md5",
#                "encryption": 7,
#                "id": 23,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            }
#        ],
#        "local_interface": "Ethernet1",
#        "qos_dscp": 10,
#        "serve": {
#            "access_lists": [
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl01",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ip"
#                },
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl02",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ipv6"
#                }
#            ]
#        },
#        "servers": [
#            {
#                "burst": true,
#                "prefer": true,
#                "server": "10.1.1.1",
#                "vrf": "vrf01"
#            },
#            {
#                "key_id": 2,
#                "maxpoll": 15,
#                "server": "25.1.1.1",
#                "vrf": "vrf01"
#            }
#        ],
#        "trusted_key": "23"
#    },
#    "changed": true,
#    "commands": [
#        "no ntp serve ip access-group acl01 in",
#        "no ntp serve ipv6 access-group acl02 in",
#        "no ntp authentication-key 23 md5 7 ********",
#        "no ntp server vrf vrf01 10.1.1.1 burst prefer",
#        "no ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#        "no ntp authenticate",
#        "no ntp local-interface Ethernet1",
#        "no ntp trusted-key 23",
#        "ntp serve ip access-group acl03 in",
#        "ntp authentication-key 2 md5 7 ********",
#        "ntp server vrf vrf01 11.21.1.1 burst minpoll 13 prefer",
#        "ntp qos dscp 15"
#    ],
#
# Using Overridden

# Before State

# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#

  - name: Replace
    arista.eos.eos_ntp_global:
      config:
        qos_dscp: 15
        authentication_keys:
          - id: 2
            algorithm: "md5"
            encryption: 7
            key: "123456"
        servers:
          - server: "11.21.1.1"
            vrf: "vrf01"
            burst: True
            prefer: True
            minpoll: 13
        serve:
          access_lists:
            - afi: "ip"
              acls:
                - acl_name: "acl03"
                  direction: "in"
      state: overridden
# After State:
# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 md5 7 123456
# ntp qos dscp 15
# ntp server vrf vrf01 11.21.1.1 prefer burst minpoll 13
# ntp serve ip access-group acl03 in
# localhost(config)#
#
#
# Module Execution:
# "after": {
#        "authentication_keys": [
#            {
#                "algorithm": "md5",
#                "encryption": 7,
#                "id": 2,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            }
#        ],
#        "qos_dscp": 15,
#        "serve": {
#            "access_lists": [
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl03",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ip"
#                }
#            ]
#        },
#        "servers": [
#            {
#                "burst": true,
#                "minpoll": 13,
#                "prefer": true,
#                "server": "11.21.1.1",
#                "vrf": "vrf01"
#            }
#        ]
#    },
#    "before": {
#        "authenticate": {
#            "enable": true
#        },
#        "authentication_keys": [
#            {
#                "algorithm": "sha1",
#                "encryption": 7,
#                "id": 2,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            },
#            {
#                "algorithm": "md5",
#                "encryption": 7,
#                "id": 23,
#                "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#            }
#        ],
#        "local_interface": "Ethernet1",
#        "qos_dscp": 10,
#        "serve": {
#            "access_lists": [
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl01",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ip"
#                },
#                {
#                    "acls": [
#                        {
#                            "acl_name": "acl02",
#                            "direction": "in"
#                        }
#                    ],
#                    "afi": "ipv6"
#                }
#            ]
#        },
#        "servers": [
#            {
#                "burst": true,
#                "prefer": true,
#                "server": "10.1.1.1",
#                "vrf": "vrf01"
#            },
#            {
#                "key_id": 2,
#                "maxpoll": 15,
#                "server": "25.1.1.1",
#                "vrf": "vrf01"
#            }
#        ],
#        "trusted_key": "23"
#    },
#    "changed": true,
#    "commands": [
#        "no ntp serve ip access-group acl01 in",
#        "no ntp serve ipv6 access-group acl02 in",
#        "no ntp authentication-key 23 md5 7 ********",
#        "no ntp server vrf vrf01 10.1.1.1 burst prefer",
#        "no ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#        "no ntp authenticate",
#        "no ntp local-interface Ethernet1",
#        "no ntp trusted-key 23",
#        "ntp serve ip access-group acl03 in",
#        "ntp authentication-key 2 md5 7 ********",
#        "ntp server vrf vrf01 11.21.1.1 burst minpoll 13 prefer",
#        "ntp qos dscp 15"
#    ],
#

# using deleted:
# Before State

# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 11.21.1.1 prefer burst minpoll 13
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#

  - name: Delete  ntp-global
    arista.eos.eos_ntp_global:
      state: deleted

# After State:
#  localhost(config)#show running-config | section ntp
# localhost(config)#
#
#
# # Module Execution
# "after": {},
#     "before": {
#         "authenticate": {
#             "enable": true
#         },
#         "authentication_keys": [
#             {
#                 "algorithm": "sha1",
#                 "encryption": 7,
#                 "id": 2,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             },
#             {
#                 "algorithm": "md5",
#                 "encryption": 7,
#                 "id": 23,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             }
#         ],
#         "local_interface": "Ethernet1",
#         "qos_dscp": 10,
#         "serve": {
#             "access_lists": [
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl01",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ip"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl02",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ]
#         },
#         "servers": [
#             {
#                 "burst": true,
#                 "prefer": true,
#                 "server": "10.1.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "burst": true,
#                 "minpoll": 13,
#                 "prefer": true,
#                 "server": "11.21.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "key": 2,
#                 "maxpoll": 15,
#                 "server": "25.1.1.1",
#                 "vrf": "vrf01"
#             }
#         ],
#         "trusted_key": "23"
#     },
#     "changed": true,
#     "commands": [
#         "no ntp serve ip access-group acl01 in",
#         "no ntp serve ipv6 access-group acl02 in",
#         "no ntp authentication-key 2 sha1 7 ********",
#         "no ntp authentication-key 23 md5 7 ********",
#         "no ntp server vrf vrf01 10.1.1.1 burst prefer",
#         "no ntp server vrf vrf01 11.21.1.1 burst minpoll 13 prefer",
#         "no ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#         "no ntp authenticate",
#         "no ntp local-interface Ethernet1",
#         "no ntp qos dscp 10",
#         "no ntp trusted-key 23"
#     ],
#

# Using parsed:
# parsed.cfg
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 11.21.1.1 prefer burst minpoll 13
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in

  - name: parse configs
    arista.eos.eos_ntp_global:
      running_config: "{{ lookup('file', './parsed_ntp_global.cfg') }}"
      state: parsed
    tags:
      - parsed
# Module Execution
# "parsed": {
#         "authenticate": {
#             "enable": true
#         },
#         "authentication_keys": [
#             {
#                 "algorithm": "sha1",
#                 "encryption": 7,
#                 "id": 2,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             },
#             {
#                 "algorithm": "md5",
#                 "encryption": 7,
#                 "id": 23,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             }
#         ],
#         "local_interface": "Ethernet1",
#         "qos_dscp": 10,
#         "serve": {
#             "access_lists": [
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl01",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ip"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl02",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ]
#         },
#         "servers": [
#             {
#                 "burst": true,
#                 "prefer": true,
#                 "server": "10.1.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "burst": true,
#                 "minpoll": 13,
#                 "prefer": true,
#                 "server": "11.21.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "key": 2,
#                 "maxpoll": 15,
#                 "server": "25.1.1.1",
#                 "vrf": "vrf01"
#             }
#         ],
#         "trusted_key": "23"
#     }
# }

# using Gathered
# Device config:
# localhost(config)#show running-config | section ntp
# ntp authentication-key 2 sha1 7 123456
# ntp authentication-key 23 md5 7 123456
# ntp trusted-key 23
# ntp authenticate
# ntp local-interface Ethernet1
# ntp qos dscp 10
# ntp server vrf vrf01 10.1.1.1 prefer burst
# ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2
# ntp serve ip access-group acl01 in
# ntp serve ipv6 access-group acl02 in
# localhost(config)#


  - name: gather configs
    arista.eos.eos_ntp_global:
      state: gathered
    tags:
      - gathered
# Module Execution
#   "gathered": {
#         "authenticate": {
#             "enable": true
#         },
#         "authentication_keys": [
#             {
#                 "algorithm": "sha1",
#                 "encryption": 7,
#                 "id": 2,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             },
#             {
#                 "algorithm": "md5",
#                 "encryption": 7,
#                 "id": 23,
#                 "key": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER"
#             }
#         ],
#         "local_interface": "Ethernet1",
#         "qos_dscp": 10,
#         "serve": {
#             "access_lists": [
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl01",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ip"
#                 },
#                 {
#                     "acls": [
#                         {
#                             "acl_name": "acl02",
#                             "direction": "in"
#                         }
#                     ],
#                     "afi": "ipv6"
#                 }
#             ]
#         },
#         "servers": [
#             {
#                 "burst": true,
#                 "prefer": true,
#                 "server": "10.1.1.1",
#                 "vrf": "vrf01"
#             },
#             {
#                 "key_id": 2,
#                 "maxpoll": 15,
#                 "server": "25.1.1.1",
#                 "vrf": "vrf01"
#             }
#         ],
#         "trusted_key": "23"
#     },
#     "invocation": {
#         "module_args": {
#             "config": null,
#             "running_config": null,
#             "state": "gathered"
#         }
#     }
# }


# using rendered:

  - name: Render provided configuration
    arista.eos.eos_ntp_global:
      config:
        authenticate:
          enable: true
        authentication_keys:
          - id: 2
            algorithm: "sha1"
            encryption: 7
            key: "123456"
          - id: 23
            algorithm: "md5"
            encryption: 7
            key: "123456"
        local_interface: "Ethernet1"
        qos_dscp: 10
        trusted_key: 23
        servers:
          - server: "10.1.1.1"
            vrf: "vrf01"
            burst: True
            prefer: True
          - server: "25.1.1.1"
            vrf: "vrf01"
            maxpoll: 15
            key_id: 2
        serve:
          access_lists:
            - afi: "ip"
              acls:
                - acl_name: "acl01"
                  direction: "in"
            - afi: "ipv6"
              acls:
                 - acl_name: "acl02"
                   direction: "in"
      state: rendered
    become: yes

# Module Execution:
# "rendered": [
#         "ntp serve ip access-group acl01 in",
#         "ntp serve ipv6 access-group acl02 in",
#         "ntp authentication-key 2 sha1 7 ********",
#         "ntp authentication-key 23 md5 7 ********",
#         "ntp server vrf vrf01 10.1.1.1 burst prefer",
#         "ntp server vrf vrf01 25.1.1.1 key 2 maxpoll 15",
#         "ntp authenticate",
#         "ntp local-interface Ethernet1",
#         "ntp qos dscp 10",
#         "ntp trusted-key 23"
#     ]
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration after module execution.

Returned: when changed

Sample: “This output will always be in the same format as the module argspec.\n”

before

dictionary

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: “This output will always be in the same format as the module argspec.\n”

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: [“ntp master stratum 2”, “ntp peer 198.51.100.1 use-vrf test maxpoll 7”, “ntp authentication-key 10 md5 wawyhanx2 7”, “ntp access-group peer PeerAcl1”, “ntp access-group peer PeerAcl2”, “ntp access-group query-only QueryAcl1”]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: “This output will always be in the same format as the module argspec.\n”

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: “This output will always be in the same format as the module argspec.\n”

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: [“ntp authentication-key 2 sha1 7 123456”, “ntp authentication-key 23 md5 7 123456”, “ntp trusted-key 23”, “ntp authenticate”, “ntp local-interface Ethernet1”, “ntp qos dscp 10”, “ntp server vrf vrf01 10.1.1.1 prefer burst”, “ntp server vrf vrf01 25.1.1.1 maxpoll 15 key 2”, “ntp serve ip access-group acl01 in”, “ntp serve ipv6 access-group acl02 in”]

Authors

  • Gomathi Selvi Srinivasan (@GomathiselviS)