cisco.dnac.device_credential_intent module – Resource module for Global Device Credentials and Assigning Credentials to sites.

Note

This module is part of the cisco.dnac collection (version 6.22.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.device_credential_intent.

New in cisco.dnac 6.7.0

Synopsis

• Manage operations on Global Device Credentials and Assigning Credentials to sites.

• API to create global device credentials.

• API to update global device credentials.

• API to delete global device credentials.

• API to assign the device credential to the site.

Requirements

The below requirements are needed on the host that executes this module.

• dnacentersdk >= 2.7.2

• python >= 3.9

Parameters

Parameter	Comments
config list / elements=dictionary / required	List of details of global device credentials and site names.
assign_credentials_to_site dictionary	Assign Device Credentials to Site.
cli_credential dictionary	CLI Credential.
description string	CLI Credential Description.
id string	CLI Credential Id. Use (Description, Username) or Id.
username string	CLI Credential Username.
https_read dictionary	HTTP(S) Read Credential
description string	HTTP(S) Read Credential Description.
id string	HTTP(S) Read Credential Id. Use (Description, Username) or Id.
username string	HTTP(S) Read Credential Username.
https_write dictionary	HTTP(S) Write Credential
description string	HTTP(S) Write Credential Description.
id string	HTTP(S) Write Credential Id. Use (Description, Username) or Id.
username string	HTTP(S) Write Credential Username.
site_name list / elements=string	Site Name to assign credential.
snmp_v2c_read dictionary	SNMPv2c Read Credential
description string	SNMPv2c Read Credential Description.
id string	SNMPv2c Read Credential Id. Use Description or Id.
snmp_v2c_write dictionary	SNMPv2c Write Credential
description string	SNMPv2c Write Credential Description.
id string	SNMPv2c Write Credential Id. Use Description or Id.
snmp_v3 dictionary	snmp_v3 Credential
description string	snmp_v3 Credential Description.
id string	snmp_v3 Credential Id. Use Description or Id.
global_credential_details dictionary	Manages global device credentials
cli_credential list / elements=dictionary	Global Credential V2’s cliCredential.
description string	Description. Required for creating the credential.
enable_password string	cli_credential credential Enable Password. Password cannot contain spaces or angle brackets (< >)
id string	Credential Id. Use this for updating the device credential.
old_description string	Old Description. Use this for updating the description/Username.
old_username string	Old Username. Use this for updating the description/Username.
password string	cli_credential credential Password. Required for creating/updating the credential. Password cannot contain spaces or angle brackets (< >).
username string	cli_credential credential Username. Username cannot contain spaces or angle brackets (< >).
https_read list / elements=dictionary	Global Credential V2’s httpsRead.
id string	Credential Id. Use this for updating the device credential.
name string	Name. Required for creating the credential.
old_description string	Old Description. Use this for updating the description/Username.
old_username string	Old Username. Use this for updating the description/Username.
password string	https_read credential Password. Required for creating/updating the credential. Password cannot contain spaces or angle brackets (< >).
port integer	Port. Default port is 443.
username string	https_read credential Username. Username cannot contain spaces or angle brackets (< >).
https_write list / elements=dictionary	Global Credential V2’s httpsWrite.
id string	Credential Id. Use this for updating the device credential.
name string	Name. Required for creating the credential.
old_description string	Old Description. Use this for updating the description/Username.
old_username string	Old Username. Use this for updating the description/Username.
password string	https_write credential Password. Required for creating/updating the credential. Password cannot contain spaces or angle brackets (< >).
port integer	Port. Default port is 443.
username string	https_write credential Username. Username cannot contain spaces or angle brackets (< >).
snmp_v2c_read list / elements=dictionary	Global Credential V2’s snmpV2cRead.
description string	Description. Required for creating the credential.
id string	Credential Id. Use this for updating the device credential.
old_description string	Old Description. Use this for updating the description.
read_community string	snmp_v2c_read Read Community. Password cannot contain spaces or angle brackets (< >).
snmp_v2c_write list / elements=dictionary	Global Credential V2’s snmpV2cWrite.
description string	Description. Required for creating the credential.
id string	Credential Id. Use this for updating the device credential.
old_description string	Old Description. Use this for updating the description.
write_community string	snmp_v2c_write Write Community. Password cannot contain spaces or angle brackets (< >).
snmp_v3 list / elements=dictionary	Global Credential V2’s snmpV3.
auth_password string	snmp_v3 Auth Password. Password must contain minimum 8 characters. Password cannot contain spaces or angle brackets (< >).
auth_type string	Auth Type. [“SHA”, “MD5”].
description string	snmp_v3 Description. Should be unique from other snmp_v3 credentials.
id string	Credential Id. Use this for updating the device credential.
old_description string	Old Description. Use this for updating the description.
privacy_password string	snmp_v3 Privacy Password. Password must contain minimum 8 characters. Password cannot contain spaces or angle brackets (< >).
privacy_type string	Privacy Type. [“AES128”, “AES192”, “AES256”].
snmp_mode string	Snmp Mode. [“AUTHPRIV”, “AUTHNOPRIV”, “NOAUTHNOPRIV”].
username string	snmp_v3 credential Username. Username cannot contain spaces or angle brackets (< >).
config_verify boolean	Set to True to verify the Cisco DNA Center after applying the playbook config. Choices: false ← (default) true
dnac_api_task_timeout integer	Defines the timeout in seconds for API calls to retrieve task details. If the task details are not received within this period, the process will end, and a timeout notification will be logged. Default: 1200
dnac_debug boolean	Flag for Cisco DNA Center SDK to enable debugging. Choices: false ← (default) true
dnac_host string / required	The Cisco DNA Center hostname.
dnac_log boolean	Flag to enable/disable playbook execution logging. When true and dnac_log_file_path is provided, - Create the log file at the execution location with the specified name. When true and dnac_log_file_path is not provided, - Create the log file at the execution location with the name ‘dnac.log’. When false, - Logging is disabled. If the log file doesn’t exist, - It is created in append or write mode based on the “dnac_log_append” flag. If the log file exists, - It is overwritten or appended based on the “dnac_log_append” flag. Choices: false ← (default) true
dnac_log_append boolean	Determines the mode of the file. Set to True for ‘append’ mode. Set to False for ‘write’ mode. Choices: false true ← (default)
dnac_log_file_path string	Governs logging. Logs are recorded if dnac_log is True. If path is not specified, - When ‘dnac_log_append’ is True, ‘dnac.log’ is generated in the current Ansible directory; logs are appended. - When ‘dnac_log_append’ is False, ‘dnac.log’ is generated; logs are overwritten. If path is specified, - When ‘dnac_log_append’ is True, the file opens in append mode. - When ‘dnac_log_append’ is False, the file opens in write (w) mode. - In shared file scenarios, without append mode, content is overwritten after each module execution. - For a shared log file, set append to False for the 1st module (to overwrite); for subsequent modules, set append to True. Default: "dnac.log"
dnac_log_level string	Sets the threshold for log level. Messages with a level equal to or higher than this will be logged. Levels are listed in order of severity [CRITICAL, ERROR, WARNING, INFO, DEBUG]. CRITICAL indicates serious errors halting the program. Displays only CRITICAL messages. ERROR indicates problems preventing a function. Displays ERROR and CRITICAL messages. WARNING indicates potential future issues. Displays WARNING, ERROR, CRITICAL messages. INFO tracks normal operation. Displays INFO, WARNING, ERROR, CRITICAL messages. DEBUG provides detailed diagnostic info. Displays all log messages. Default: "WARNING"
dnac_password string	The Cisco DNA Center password to authenticate.
dnac_port string	The Cisco DNA Center port. Default: "443"
dnac_task_poll_interval integer	Specifies the interval in seconds between successive calls to the API to retrieve task details. Default: 2
dnac_username aliases: user string	The Cisco DNA Center username to authenticate. Default: "admin"
dnac_verify boolean	Flag to enable or disable SSL certificate verification. Choices: false true ← (default)
dnac_version string	Informs the SDK which version of Cisco DNA Center to use. Default: "2.2.3.3"
state string	The state of Cisco DNA Center after module completion. Choices: "merged" ← (default) "deleted"
validate_response_schema boolean	Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices: false true ← (default)

Notes

Note

• SDK Method used are discovery.Discovery.create_global_credentials_v2, discovery.Discovery.delete_global_credential_v2, discovery.Discovery.update_global_credentials_v2, network_settings.NetworkSettings.assign_device_credential_to_site_v2,

• Paths used are post /dna/intent/api/v2/global-credential, delete /dna/intent/api/v2/global-credential/{id}, put /dna/intent/api/v2/global-credential, post /dna/intent/api/v2/credential-to-site/{siteId},

• Does not support check_mode

• The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

• The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

See Also

See also

Cisco DNA Center documentation for Discovery CreateGlobalCredentialsV2

Complete reference of the CreateGlobalCredentialsV2 API.

Cisco DNA Center documentation for Discovery DeleteGlobalCredentialV2

Complete reference of the DeleteGlobalCredentialV2 API.

Cisco DNA Center documentation for Discovery UpdateGlobalCredentialsV2

Complete reference of the UpdateGlobalCredentialsV2 API.

Cisco DNA Center documentation for Network Settings AssignDeviceCredentialToSiteV2

Complete reference of the AssignDeviceCredentialToSiteV2 API.

Examples

---
  - name: Create Credentials and assign it to a site.
    cisco.dnac.device_credential_intent:
    dnac_host: "{{ dnac_host }}"
    dnac_port: "{{ dnac_port }}"
    dnac_username: "{{ dnac_username }}"
    dnac_password: "{{ dnac_password }}"
    dnac_verify: "{{ dnac_verify }}"
    dnac_debug: "{{ dnac_debug }}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - global_credential_details:
        cli_credential:
        - description: string
          username: string
          password: string
          enable_password: string
        snmp_v2c_read:
        - description: string
          read_community: string
        snmp_v2c_write:
        - description: string
          write_community: string
        snmp_v3:
        - auth_password: string
          auth_type: SHA
          snmp_mode: AUTHPRIV
          privacy_password: string
          privacy_type: AES128
          username: string
          description: string
        https_read:
        - description: string
          username: string
          password: string
          port: 443
        https_write:
        - description: string
          username: string
          password: string
          port: 443
      assign_credentials_to_site:
        cli_credential:
          id: string
        snmp_v2c_read:
          id: string
        snmp_v2c_write:
          id: string
        snmp_v3:
          id: string
        https_read:
          id: string
        https_write:
           id: string
        site_name:
        - string

  - name: Create Multiple Credentials.
    cisco.dnac.device_credential_intent:
    dnac_host: "{{ dnac_host }}"
    dnac_port: "{{ dnac_port }}"
    dnac_username: "{{ dnac_username }}"
    dnac_password: "{{ dnac_password }}"
    dnac_verify: "{{ dnac_verify }}"
    dnac_debug: "{{ dnac_debug }}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - global_credential_details:
        cli_credential:
        - description: string
          username: string
          password: string
          enable_password: string
        - description: string
          username: string
          password: string
          enable_password: string
        snmp_v2c_read:
        - description: string
          read_community: string
        - description: string
          read_community: string
        snmp_v2c_write:
        - description: string
          write_community: string
        - description: string
          write_community: string
        snmp_v3:
        - auth_password: string
          auth_type: SHA
          snmp_mode: AUTHPRIV
          privacy_password: string
          privacy_type: AES128
          username: string
          description: string
        - auth_password: string
          auth_type: SHA
          snmp_mode: AUTHPRIV
          privacy_password: string
          privacy_type: AES128
          username: string
          description: string
        https_read:
        - description: string
          username: string
          password: string
          port: 443
        - description: string
          username: string
          password: string
          port: 443
        https_write:
        - description: string
          username: string
          password: string
          port: 443
        - description: string
          username: string
          password: string
          port: 443

  - name: Update global device credentials using id
    cisco.dnac.device_credential_intent:
    dnac_host: "{{ dnac_host }}"
    dnac_port: "{{ dnac_port }}"
    dnac_username: "{{ dnac_username }}"
    dnac_password: "{{ dnac_password }}"
    dnac_verify: "{{ dnac_verify }}"
    dnac_debug: "{{ dnac_debug }}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - global_credential_details:
        cli_credential:
        - description: string
          username: string
          password: string
          enable_password: string
          id: string
        snmp_v2c_read:
        - description: string
          read_community: string
          id: string
        snmp_v2c_write:
        - description: string
          write_community: string
          id: string
        snmp_v3:
        - auth_password: string
          auth_type: SHA
          snmp_mode: AUTHPRIV
          privacy_password: string
          privacy_type: AES128
          username: string
          description: string
          id: string
        https_read:
        - description: string
          username: string
          password: string
          port: 443
          id: string
        https_write:
        - description: string
          username: string
          password: string
          port: 443
          id: string

  - name: Update multiple global device credentials using id
    cisco.dnac.device_credential_intent:
    dnac_host: "{{ dnac_host }}"
    dnac_port: "{{ dnac_port }}"
    dnac_username: "{{ dnac_username }}"
    dnac_password: "{{ dnac_password }}"
    dnac_verify: "{{ dnac_verify }}"
    dnac_debug: "{{ dnac_debug }}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - global_credential_details:
        cli_credential:
        - description: string
          username: string
          password: string
          enable_password: string
          id: string
        - description: string
          username: string
          password: string
          enable_password: string
          id: string
        snmp_v2c_read:
        - description: string
          read_community: string
          id: string
        - description: string
          read_community: string
          id: string
        snmp_v2c_write:
        - description: string
          write_community: string
          id: string
        - description: string
          write_community: string
          id: string
        snmp_v3:
        - auth_password: string
          auth_type: SHA
          snmp_mode: AUTHPRIV
          privacy_password: string
          privacy_type: AES128
          username: string
          description: string
          id: string
        - auth_password: string
          auth_type: SHA
          snmp_mode: AUTHPRIV
          privacy_password: string
          privacy_type: AES128
          username: string
          description: string
          id: string
        https_read:
        - description: string
          username: string
          password: string
          port: 443
          id: string
        - description: string
          username: string
          password: string
          port: 443
          id: string
        https_write:
        - description: string
          username: string
          password: string
          port: 443
          id: string
        - description: string
          username: string
          password: string
          port: 443
          id: string

  - name: Update global device credential name/description using old name and description.
    cisco.dnac.device_credential_intent:
    dnac_host: "{{ dnac_host }}"
    dnac_port: "{{ dnac_port }}"
    dnac_username: "{{ dnac_username }}"
    dnac_password: "{{ dnac_password }}"
    dnac_verify: "{{ dnac_verify }}"
    dnac_debug: "{{ dnac_debug }}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - global_credential_details:
        cli_credential:
        - description: string
          username: string
          password: string
          enable_password: string
          old_description: string
          old_username: string
        snmp_v2c_read:
        - description: string
          read_community: string
          old_description: string
        snmp_v2c_write:
        - description: string
          write_community: string
          old_description: string
        snmp_v3:
        - auth_password: string
          auth_type: string
          snmp_mode: string
          privacy_password: string
          privacy_type: string
          username: string
          description: string
        https_read:
        - description: string
          username: string
          password: string
          port: string
          old_description: string
          old_username: string
        https_write:
        - description: string
          username: string
          password: string
          port: string
          old_description: string
          old_username: string

  - name: Assign Credentials to sites using old description and username.
    cisco.dnac.device_credential_intent:
    dnac_host: "{{ dnac_host }}"
    dnac_port: "{{ dnac_port }}"
    dnac_username: "{{ dnac_username }}"
    dnac_password: "{{ dnac_password }}"
    dnac_verify: "{{ dnac_verify }}"
    dnac_debug: "{{ dnac_debug }}"
    dnac_log: True
    dnac_log_level: "{{ dnac_log_level }}"
    state: merged
    config_verify: True
    config:
    - assign_credentials_to_site:
        cli_credential:
          description: string
          username: string
        snmp_v2c_read:
          description: string
        snmp_v2c_write:
          description: string
        snmp_v3:
          description: string
        https_read:
          description: string
          username: string
        https_write:
          description: string
          username: string
        site_name:
        - string
        - string

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
dnac_response1 dictionary	A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: {"response": {"taskId": "string", "url": "string"}, "version": "string"}
dnac_response2 dictionary	A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: {"response": {"taskId": "string", "url": "string"}, "version": "string"}

Authors

• Muthu Rakesh (@MUTHU-RAKESH-27) Madhan Sankaranarayanan (@madhansansel)

Collection links

• Issue Tracker
• Repository (Sources)