cisco.dnac.provision_intent module – Resource module for provision functions
Note
This module is part of the cisco.dnac collection (version 6.25.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.dnac.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.dnac.provision_intent.
New in cisco.dnac 6.6.0
Synopsis
Manage operation related to wired and wireless provisioning
API to re-provision provisioned devices
API to un-provision provisioned devices
Requirements
The below requirements are needed on the host that executes this module.
dnacentersdk == 2.4.5
python >= 3.9
Parameters
Parameter |
Comments |
|---|---|
List of details of device being managed. |
|
Interface details of the controller |
|
Ip Address allocated to the interface |
|
Ip Address allocated to the interface |
|
Ip Address allocated to the interface |
|
Ip Address allocated to the interface |
|
Ip Address allocated to the interface |
|
Ip Address allocated to the interface |
|
Location of the sites allocated for the APs |
|
Management Ip Address . |
|
Name of site where the device needs to be added. |
|
Set to True to verify the Cisco Catalyst Center config after applying the playbook config. Choices:
|
|
Defines the timeout in seconds for API calls to retrieve task details. If the task details are not received within this period, the process will end, and a timeout notification will be logged. Default: |
|
Flag for Cisco DNA Center SDK to enable debugging. Choices:
|
|
The Cisco DNA Center hostname. |
|
Flag to enable/disable playbook execution logging. When true and dnac_log_file_path is provided, - Create the log file at the execution location with the specified name. When true and dnac_log_file_path is not provided, - Create the log file at the execution location with the name ‘dnac.log’. When false, - Logging is disabled. If the log file doesn’t exist, - It is created in append or write mode based on the “dnac_log_append” flag. If the log file exists, - It is overwritten or appended based on the “dnac_log_append” flag. Choices:
|
|
Determines the mode of the file. Set to True for ‘append’ mode. Set to False for ‘write’ mode. Choices:
|
|
Governs logging. Logs are recorded if dnac_log is True. If path is not specified, - When ‘dnac_log_append’ is True, ‘dnac.log’ is generated in the current Ansible directory; logs are appended. - When ‘dnac_log_append’ is False, ‘dnac.log’ is generated; logs are overwritten. If path is specified, - When ‘dnac_log_append’ is True, the file opens in append mode. - When ‘dnac_log_append’ is False, the file opens in write (w) mode. - In shared file scenarios, without append mode, content is overwritten after each module execution. - For a shared log file, set append to False for the 1st module (to overwrite); for subsequent modules, set append to True. Default: |
|
Sets the threshold for log level. Messages with a level equal to or higher than this will be logged. Levels are listed in order of severity [CRITICAL, ERROR, WARNING, INFO, DEBUG]. CRITICAL indicates serious errors halting the program. Displays only CRITICAL messages. ERROR indicates problems preventing a function. Displays ERROR and CRITICAL messages. WARNING indicates potential future issues. Displays WARNING, ERROR, CRITICAL messages. INFO tracks normal operation. Displays INFO, WARNING, ERROR, CRITICAL messages. DEBUG provides detailed diagnostic info. Displays all log messages. Default: |
|
The Cisco DNA Center password to authenticate. |
|
The Cisco DNA Center port. Default: |
|
Specifies the interval in seconds between successive calls to the API to retrieve task details. Default: |
|
The Cisco DNA Center username to authenticate. Default: |
|
Flag to enable or disable SSL certificate verification. Choices:
|
|
Informs the SDK which version of Cisco DNA Center to use. Default: |
|
The state of DNAC after module completion. Choices:
|
|
Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices:
|
Notes
Note
SDK Methods used are sites.Sites.get_site, devices.Devices.get_network_device_by_ip, task.Task.get_task_by_id, sda.Sda.get_provisioned_wired_device, sda.Sda.re_provision_wired_device, sda.Sda.provision_wired_device, wireless.Wireless.provision
Paths used are get /dna/intent/api/v1/site get /dna/intent/api/v1/network-device/ip-address/{ipAddress} get /dna/intent/api/v1/task/{taskId} get /dna/intent/api/v1/business/sda/provision-device put /dna/intent/api/v1/business/sda/provision-device post /dna/intent/api/v1/business/sda/provision-device post /dna/intent/api/v1/wireless/provision
Does not support
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
Examples
- name: Create/Modify a new provision
cisco.dnac.provision_intent:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
dnac_log: True
state: merged
config:
- site_name: string
management_ip_address: string
managed_ap_locations: list
dynamic_interfaces:
- vlan_id: integer
interface_name: string
interface_ip_address: string
interface_gateway: string
interface_netmask_in_c_i_d_r: integer
lag_or_port_number: integer
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary with details of provision is returned Returned: always Sample: |
|
A list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: |
|
A dictionary with the exisiting details as returned by the Cisco DNAC Python SDK Returned: always Sample: |