cisco.dnac.site_health_summaries_info module – Information module for Site Health Summaries Info
Note
This module is part of the cisco.dnac collection (version 6.25.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.dnac.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.dnac.site_health_summaries_info.
New in cisco.dnac 6.15.0
Synopsis
This module represents an alias of the module site_health_summaries_v1_info
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
dnacentersdk >= 2.4.9
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
Attribute query parameter. Supported Attributes id, siteHierarchy, siteHierarchyId, siteType, latitude, longitude, networkDeviceCount, networkDeviceGoodHealthCount,wirelessDeviceCount, wirelessDeviceGoodHealthCount, accessDeviceCount, accessDeviceGoodHealthCount, coreDeviceCount, coreDeviceGoodHealthCount, distributionDeviceCount, distributionDeviceGoodHealthCount, routerDeviceCount, routerDeviceGoodHealthCount, apDeviceCount, apDeviceGoodHealthCount, wlcDeviceCount, wlcDeviceGoodHealthCount, switchDeviceCount, switchDeviceGoodHealthCount, networkDeviceGoodHealthPercentage, accessDeviceGoodHealthPercentage, coreDeviceGoodHealthPercentage, distributionDeviceGoodHealthPercentage, routerDeviceGoodHealthPercentage, apDeviceGoodHealthPercentage, wlcDeviceGoodHealthPercentage, switchDeviceGoodHealthPercentage, wirelessDeviceGoodHealthPercentage, clientCount, clientGoodHealthCount, wiredClientCount, wirelessClientCount, wiredClientGoodHealthCount, wirelessClientGoodHealthCount, clientGoodHealthPercentage, wiredClientGoodHealthPercentage, wirelessClientGoodHealthPercentage, clientDataUsage, p1IssueCount, p2IssueCount, p3IssueCount, p4IssueCount, issueCount If length of attribute list is too long, please use ‘view’ param instead. Examples attribute=siteHierarchy (single attribute requested) attribute=siteHierarchy&attribute=clientCount (multiple attributes requested). |
|
Flag for Cisco DNA Center SDK to enable debugging. Choices:
|
|
The Cisco DNA Center hostname. |
|
The Cisco DNA Center password to authenticate. |
|
The Cisco DNA Center port. Default: |
|
The Cisco DNA Center username to authenticate. Default: |
|
Flag to enable or disable SSL certificate verification. Choices:
|
|
Informs the SDK which version of Cisco DNA Center to use. Default: |
|
EndTime query parameter. End time to which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. |
|
Additional headers. |
|
Id query parameter. The list of entity Uuids. (Ex.”6bef213c-19ca-4170-8375-b694e251101c”) Examples id=6bef213c-19ca-4170-8375-b694e251101c (single entity uuid requested) id=6bef213c-19ca-4170-8375- b694e251101c&id=32219612-819e-4b5e-a96b-cf22aca13dd9&id=2541e9a7-b80d-4955-8aa2-79b233318ba0 (multiple entity uuid with ‘&’ separator). |
|
Limit query parameter. Maximum number of records to return. |
|
Offset query parameter. Specifies the starting point within all records returned by the API. It’s one based offset. The starting value is 1. |
|
Order query parameter. The sort order of the field ascending or descending. |
|
SiteHierarchy query parameter. The full hierarchical breakdown of the site tree starting from Global site name and ending with the specific site name. The Root site is named “Global” (Ex. `Global/AreaName/BuildingName/FloorName`) This field supports wildcard asterisk (`*`) character search support. E.g. `*/San*, */San, /San*` Examples `?siteHierarchy=Global/AreaName/BuildingName/FloorName` (single siteHierarchy requested) `?siteHierarchy=Global/AreaName/BuildingName/FloorName&siteHierarchy=Global /AreaName2/BuildingName2/FloorName2` (multiple siteHierarchies requested). |
|
SiteHierarchyId query parameter. The full hierarchy breakdown of the site tree in id form starting from Global site UUID and ending with the specific site UUID. (Ex. `globalUuid/areaUuid/buildingUuid/floorUuid`) This field supports wildcard asterisk (`*`) character search support. E.g. `*uuid*, *uuid, uuid*` Examples `?siteHierarchyId=globalUuid/areaUuid/buildingUuid/floorUuid `(single siteHierarchyId requested) `?siteHiera rchyId=globalUuid/areaUuid/buildingUuid/floorUuid&siteHierarchyId=globalUuid/areaUuid2/buildingUuid2/floorUu id2` (multiple siteHierarchyIds requested). |
|
SiteType query parameter. The type of the site. A site can be an area, building, or floor. Default when not provided will be `floor,building,area` Examples `?siteType=area` (single siteType requested) `?siteType=area&siteType=building&siteType=floor` (multiple siteTypes requested). |
|
SortBy query parameter. A field within the response to sort by. |
|
StartTime query parameter. Start time from which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. If `startTime` is not provided, API will default to current time. |
|
Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices:
|
|
View query parameter. The specific summary view being requested. This is an optional parameter which can be passed to get one or more of the specific health data summaries associated with sites. ### Response data proviced by each view 1. **site** id, siteHierarchy, siteHierarchyId, siteType, latitude, longitude 2. **network** id, networkDeviceCount, networkDeviceGoodHealthCount,wirelessDeviceCount, wirelessDeviceGoodHealthCount, accessDeviceCount, accessDeviceGoodHealthCount, coreDeviceCount, coreDeviceGoodHealthCount, distributionDeviceCount, distributionDeviceGoodHealthCount, routerDeviceCount, routerDeviceGoodHealthCount, apDeviceCount, apDeviceGoodHealthCount, wlcDeviceCount, wlcDeviceGoodHealthCount, switchDeviceCount, switchDeviceGoodHealthCount, networkDeviceGoodHealthPercentage, accessDeviceGoodHealthPercentage, coreDeviceGoodHealthPercentage, distributionDeviceGoodHealthPercentage, routerDeviceGoodHealthPercentage, apDeviceGoodHealthPercentage, wlcDeviceGoodHealthPercentage, switchDeviceGoodHealthPercentage, wirelessDeviceGoodHealthPercentage 3. **client** id, clientCount, clientGoodHealthCount, wiredClientCount, wirelessClientCount, wiredClientGoodHealthCount, wirelessClientGoodHealthCount, clientGoodHealthPercentage, wiredClientGoodHealthPercentage, wirelessClientGoodHealthPercentage, clientDataUsage 4. **issue** id, p1IssueCount, p2IssueCount, p3IssueCount, p4IssueCount, issueCount When this query parameter is not added the default summaries are **site,client,network,issue** Examples view=client (single view requested) view=client&view=network&view=issue (multiple views requested). |
Notes
Note
SDK Method used are sites.Sites.read_list_of_site_health_summaries_v1, sites.Sites.read_site_health_summary_data_by_site_id_v1,
Paths used are get /dna/data/api/v1/siteHealthSummaries, get /dna/data/api/v1/siteHealthSummaries/{id},
It should be noted that this module is an alias of site_health_summaries_v1_info
Supports
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
See Also
See also
- Cisco DNA Center documentation for Sites ReadListOfSiteHealthSummariesV1
Complete reference of the ReadListOfSiteHealthSummariesV1 API.
- Cisco DNA Center documentation for Sites ReadSiteHealthSummaryDataBySiteIdV1
Complete reference of the ReadSiteHealthSummaryDataBySiteIdV1 API.
Examples
- name: Get all Site Health Summaries Info
cisco.dnac.site_health_summaries_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
startTime: 0
endTime: 0
limit: 0
offset: 0
sortBy: string
order: string
siteHierarchy: string
siteHierarchyId: string
siteType: string
id: string
view: string
attribute: string
register: result
- name: Get Site Health Summaries Info by id
cisco.dnac.site_health_summaries_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
startTime: 0
endTime: 0
view: string
attribute: string
id: string
register: result
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: |