cisco.dnac.site_health_summaries_summary_analytics_v1_info module – Information module for Site Health Summaries Summary Analytics V1
Note
This module is part of the cisco.dnac collection (version 6.25.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.dnac.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.dnac.site_health_summaries_summary_analytics_v1_info.
New in cisco.dnac 6.15.0
Synopsis
Get all Site Health Summaries Summary Analytics V1.
Get an aggregated summary of all site health or use the query params to get an aggregated summary of health for a subset of sites. This API provides the latest health data from a given `endTime` If data is not ready for the provided endTime, the request will fail, and the error message will indicate the recommended endTime to use to retrieve a complete data set. This behavior may occur if the provided endTime=currentTime, since we are not a real time system. When `endTime` is not provided, the API returns the latest data. This API also provides issue data. The `startTime` query param can be used to specify the beginning point of time range to retrieve the active issue counts in. When this param is not provided, the default `startTime` will be 24 hours before endTime. Aggregated response data will NOT have unique identifier data populated. List of unique identifier data `id`, `siteHierarchy`, `siteHierarchyId`, `siteType`, `latitude`, `longitude`. For detailed information about the usage of the API, please refer to the Open API specification document - https //github.com/cisco-en- programmability/catalyst-center-api-specs/blob/main/Assurance/CE_Cat_Center_Org- siteHealthSummaries-1.0.3-resolved.yaml.
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
dnacentersdk >= 2.4.9
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
Attribute query parameter. Supported Attributes id, siteHierarchy, siteHierarchyId, siteType, latitude, longitude, networkDeviceCount, networkDeviceGoodHealthCount,wirelessDeviceCount, wirelessDeviceGoodHealthCount, accessDeviceCount, accessDeviceGoodHealthCount, coreDeviceCount, coreDeviceGoodHealthCount, distributionDeviceCount, distributionDeviceGoodHealthCount, routerDeviceCount, routerDeviceGoodHealthCount, apDeviceCount, apDeviceGoodHealthCount, wlcDeviceCount, wlcDeviceGoodHealthCount, switchDeviceCount, switchDeviceGoodHealthCount, networkDeviceGoodHealthPercentage, accessDeviceGoodHealthPercentage, coreDeviceGoodHealthPercentage, distributionDeviceGoodHealthPercentage, routerDeviceGoodHealthPercentage, apDeviceGoodHealthPercentage, wlcDeviceGoodHealthPercentage, switchDeviceGoodHealthPercentage, wirelessDeviceGoodHealthPercentage, clientCount, clientGoodHealthCount, wiredClientCount, wirelessClientCount, wiredClientGoodHealthCount, wirelessClientGoodHealthCount, clientGoodHealthPercentage, wiredClientGoodHealthPercentage, wirelessClientGoodHealthPercentage, clientDataUsage, p1IssueCount, p2IssueCount, p3IssueCount, p4IssueCount, issueCount If length of attribute list is too long, please use ‘view’ param instead. Examples attribute=siteHierarchy (single attribute requested) attribute=siteHierarchy&attribute=clientCount (multiple attributes requested). |
|
Flag for Cisco DNA Center SDK to enable debugging. Choices:
|
|
The Cisco DNA Center hostname. |
|
The Cisco DNA Center password to authenticate. |
|
The Cisco DNA Center port. Default: |
|
The Cisco DNA Center username to authenticate. Default: |
|
Flag to enable or disable SSL certificate verification. Choices:
|
|
Informs the SDK which version of Cisco DNA Center to use. Default: |
|
EndTime query parameter. End time to which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. |
|
Additional headers. |
|
Id query parameter. The list of entity Uuids. (Ex.”6bef213c-19ca-4170-8375-b694e251101c”) Examples id=6bef213c-19ca-4170-8375-b694e251101c (single entity uuid requested) id=6bef213c-19ca-4170-8375- b694e251101c&id=32219612-819e-4b5e-a96b-cf22aca13dd9&id=2541e9a7-b80d-4955-8aa2-79b233318ba0 (multiple entity uuid with ‘&’ separator). |
|
SiteHierarchy query parameter. The full hierarchical breakdown of the site tree starting from Global site name and ending with the specific site name. The Root site is named “Global” (Ex. `Global/AreaName/BuildingName/FloorName`) This field supports wildcard asterisk (`*`) character search support. E.g. `*/San*, */San, /San*` Examples `?siteHierarchy=Global/AreaName/BuildingName/FloorName` (single siteHierarchy requested) `?siteHierarchy=Global/AreaName/BuildingName/FloorName&siteHierarchy=Global /AreaName2/BuildingName2/FloorName2` (multiple siteHierarchies requested). |
|
SiteHierarchyId query parameter. The full hierarchy breakdown of the site tree in id form starting from Global site UUID and ending with the specific site UUID. (Ex. `globalUuid/areaUuid/buildingUuid/floorUuid`) This field supports wildcard asterisk (`*`) character search support. E.g. `*uuid*, *uuid, uuid*` Examples `?siteHierarchyId=globalUuid/areaUuid/buildingUuid/floorUuid `(single siteHierarchyId requested) `?siteHiera rchyId=globalUuid/areaUuid/buildingUuid/floorUuid&siteHierarchyId=globalUuid/areaUuid2/buildingUuid2/floorUu id2` (multiple siteHierarchyIds requested). |
|
SiteType query parameter. The type of the site. A site can be an area, building, or floor. Default when not provided will be `floor,building,area` Examples `?siteType=area` (single siteType requested) `?siteType=area&siteType=building&siteType=floor` (multiple siteTypes requested). |
|
StartTime query parameter. Start time from which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. If `startTime` is not provided, API will default to current time. |
|
Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices:
|
|
View query parameter. The specific summary view being requested. This is an optional parameter which can be passed to get one or more of the specific health data summaries associated with sites. ### Response data proviced by each view 1. **site** id, siteHierarchy, siteHierarchyId, siteType, latitude, longitude 2. **network** id, networkDeviceCount, networkDeviceGoodHealthCount,wirelessDeviceCount, wirelessDeviceGoodHealthCount, accessDeviceCount, accessDeviceGoodHealthCount, coreDeviceCount, coreDeviceGoodHealthCount, distributionDeviceCount, distributionDeviceGoodHealthCount, routerDeviceCount, routerDeviceGoodHealthCount, apDeviceCount, apDeviceGoodHealthCount, wlcDeviceCount, wlcDeviceGoodHealthCount, switchDeviceCount, switchDeviceGoodHealthCount, networkDeviceGoodHealthPercentage, accessDeviceGoodHealthPercentage, coreDeviceGoodHealthPercentage, distributionDeviceGoodHealthPercentage, routerDeviceGoodHealthPercentage, apDeviceGoodHealthPercentage, wlcDeviceGoodHealthPercentage, switchDeviceGoodHealthPercentage, wirelessDeviceGoodHealthPercentage 3. **client** id, clientCount, clientGoodHealthCount, wiredClientCount, wirelessClientCount, wiredClientGoodHealthCount, wirelessClientGoodHealthCount, clientGoodHealthPercentage, wiredClientGoodHealthPercentage, wirelessClientGoodHealthPercentage, clientDataUsage 4. **issue** id, p1IssueCount, p2IssueCount, p3IssueCount, p4IssueCount, issueCount When this query parameter is not added the default summaries are **site,client,network,issue** Examples view=client (single view requested) view=client&view=network&view=issue (multiple views requested). |
Notes
Note
SDK Method used are sites.Sites.read_an_aggregated_summary_of_site_health_data_v1,
Paths used are get /dna/data/api/v1/siteHealthSummaries/summaryAnalytics,
Supports
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
See Also
See also
- Cisco DNA Center documentation for Sites ReadAnAggregatedSummaryOfSiteHealthDataV1
Complete reference of the ReadAnAggregatedSummaryOfSiteHealthDataV1 API.
Examples
- name: Get all Site Health Summaries Summary Analytics V1
cisco.dnac.site_health_summaries_summary_analytics_v1_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
startTime: 0
endTime: 0
siteHierarchy: string
siteHierarchyId: string
siteType: string
id: string
view: string
attribute: string
register: result
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: |