cisco.dnac.wireless_profiles module – Resource module for Wireless Profiles

Note

This module is part of the cisco.dnac collection (version 6.25.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.wireless_profiles.

New in cisco.dnac 6.15.0

Synopsis

  • This module represents an alias of the module wireless_profiles_v1

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • dnacentersdk >= 2.4.9

  • python >= 3.5

Parameters

Parameter

Comments

dnac_debug

boolean

Flag for Cisco DNA Center SDK to enable debugging.

Choices:

  • false ← (default)

  • true

dnac_host

string / required

The Cisco DNA Center hostname.

dnac_password

string

The Cisco DNA Center password to authenticate.

dnac_port

integer

The Cisco DNA Center port.

Default: 443

dnac_username

aliases: user

string

The Cisco DNA Center username to authenticate.

Default: "admin"

dnac_verify

boolean

Flag to enable or disable SSL certificate verification.

Choices:

  • false

  • true ← (default)

dnac_version

string

Informs the SDK which version of Cisco DNA Center to use.

Default: "2.3.7.6"

id

string

Id path parameter. Wireless Profile Id.

ssidDetails

list / elements=dictionary

Wireless Profiles’s ssidDetails.

dot11beProfileId

string

802.11be Profile Id. Applicable to IOS controllers with version 17.15 and higher. 802.11be Profiles if passed, should be same across all SSIDs in network profile being configured.

enableFabric

boolean

True if fabric is enabled, else False. Flex and fabric cannot be enabled simultaneously and a profile can only contain either flex SSIDs or fabric SSIDs and not both at the same time.

Choices:

  • false

  • true

flexConnect

dictionary

Wireless Profiles’s flexConnect.

enableFlexConnect

boolean

True if flex connect is enabled, else False. Flex and fabric cannot be enabled simultaneously and a profile can only contain either flex SSIDs or fabric SSIDs and not both at the same time.

Choices:

  • false

  • true

localToVlan

integer

Local to VLAN ID.

interfaceName

string

Interface Name. Default Value management.

ssidName

string

SSID Name.

wlanProfileName

string

WLAN Profile Name.

validate_response_schema

boolean

Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema.

Choices:

  • false

  • true ← (default)

wirelessProfileName

string

Wireless Network Profile Name.

Notes

Note

  • SDK Method used are wireless.Wireless.create_wireless_profile_connectivity_v1, wireless.Wireless.delete_wireless_profile_connectivity_v1, wireless.Wireless.update_wireless_profile_connectivity_v1,

  • Paths used are post /dna/intent/api/v1/wirelessProfiles, delete /dna/intent/api/v1/wirelessProfiles/{id}, put /dna/intent/api/v1/wirelessProfiles/{id},

  • It should be noted that this module is an alias of wireless_profiles_v1

  • Does not support check_mode

  • The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

  • The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

See Also

See also

Cisco DNA Center documentation for Wireless CreateWirelessProfileConnectivityV1

Complete reference of the CreateWirelessProfileConnectivityV1 API.

Cisco DNA Center documentation for Wireless DeleteWirelessProfileConnectivityV1

Complete reference of the DeleteWirelessProfileConnectivityV1 API.

Cisco DNA Center documentation for Wireless UpdateWirelessProfileConnectivityV1

Complete reference of the UpdateWirelessProfileConnectivityV1 API.

Examples

- name: Create
  cisco.dnac.wireless_profiles:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    state: present
    ssidDetails:
    - dot11beProfileId: string
      enableFabric: true
      flexConnect:
        enableFlexConnect: true
        localToVlan: 0
      interfaceName: string
      ssidName: string
      wlanProfileName: string
    wirelessProfileName: string

- name: Update by id
  cisco.dnac.wireless_profiles:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    state: present
    id: string
    ssidDetails:
    - dot11beProfileId: string
      enableFabric: true
      flexConnect:
        enableFlexConnect: true
        localToVlan: 0
      interfaceName: string
      ssidName: string
      wlanProfileName: string
    wirelessProfileName: string

- name: Delete by id
  cisco.dnac.wireless_profiles:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    state: absent
    id: string

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

dnac_response

dictionary

A dictionary or list with the response returned by the Cisco DNAC Python SDK

Returned: always

Sample: {"response": {"taskId": "string", "url": "string"}, "version": "string"}

Authors

  • Rafael Campos (@racampos)