cisco.ios.ios_prefix_lists module – Resource module to configure prefix lists.
Note
This module is part of the cisco.ios collection (version 9.0.3).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.ios.
To use it in a playbook, specify: cisco.ios.ios_prefix_lists.
New in cisco.ios 2.2.0
Synopsis
This module configures and manages the attributes of prefix list on Cisco IOS.
Parameters
Parameter |
Comments |
|---|---|
A list of configurations for Prefix lists. |
|
The Address Family Indicator (AFI) for the prefix list. Choices:
|
|
List of Prefix-lists. |
|
Prefix-list specific description |
|
Prefix-lists supported params. |
|
Specify packets to be rejected or forwarded Choices:
|
|
Prefix-list specific description Description param at entries level is DEPRECATED New Description is introduced at prefix_lists level, please use the Description param defined at prefix_lists level instead of Description param at entries level, as at this level description option will get removed in a future release. |
|
Minimum prefix length to be matched |
|
Maximum prefix length to be matched |
|
IPv4 prefix <network>/<length>, e.g., A.B.C.D/nn IPv6 prefix <network>/<length>, e.g., X:X:X:X::X/<0-128> |
|
sequence number of an entry |
|
Name of a prefix-list |
|
This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh bgp. The state parsed reads the configuration from |
|
The state the configuration should be left in The states merged is the default state which merges the want and have config, but for Prefix-List module as the IOS platform doesn’t allow update of Prefix-List over an pre-existing Prefix-List, same way Prefix-Lists resource module will error out for respective scenario and only addition of new Prefix-List over new sequence will be allowed with merge state. The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from Choices:
|
Notes
Note
Tested against Cisco IOSXE Version 17.3 on CML.
This module works with connection
network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html
Examples
# Using deleted by Name
# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
- name: Delete provided Prefix lists config by Prefix name
cisco.ios.ios_prefix_lists:
config:
- afi: ipv4
prefix_lists:
- name: 10
- name: test_prefix
state: deleted
# Task Output
# -------------
# before:
# - afi: ipv4
# prefix_lists:
# - description: this is test description
# entries:
# - action: deny
# le: 15
# prefix: 1.0.0.0/8
# sequence: 5
# - action: deny
# ge: 10
# prefix: 35.0.0.0/8
# sequence: 10
# - action: deny
# ge: 15
# prefix: 12.0.0.0/8
# sequence: 15
# - action: deny
# ge: 20
# le: 21
# prefix: 14.0.0.0/8
# sequence: 20
# name: '10'
# - description: this is test
# entries:
# - action: deny
# ge: 15
# prefix: 12.0.0.0/8
# sequence: 50
# name: test
# - description: this is for prefix-list
# entries:
# - action: deny
# ge: 10
# le: 15
# prefix: 35.0.0.0/8
# sequence: 5
# - action: deny
# ge: 20
# prefix: 35.0.0.0/8
# sequence: 10
# name: test_prefix
# - afi: ipv6
# prefix_lists:
# - description: this is ipv6 prefix-list
# entries:
# - action: deny
# ge: 80
# prefix: 2001:DB8:0:4::/64
# sequence: 10
# name: test_ipv6
# commands:
# - no ip prefix-list 10
# - no ip prefix-list test_prefix
# after:
# - afi: ipv4
# prefix_lists:
# - description: this is test
# entries:
# - action: deny
# ge: 15
# prefix: 12.0.0.0/8
# sequence: 50
# name: test
# - afi: ipv6
# prefix_lists:
# - description: this is ipv6 prefix-list
# entries:
# - action: deny
# ge: 80
# prefix: 2001:DB8:0:4::/64
# sequence: 10
# name: test_ipv6
# After state:
# ------------
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
# Using deleted by AFI
# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
- name: Delete provided Prefix lists config by AFI
cisco.ios.ios_prefix_lists:
config:
- afi: ipv4
state: deleted
# Task Output
# -------------
# before:
# - afi: ipv4
# prefix_lists:
# - description: this is test description
# entries:
# - action: deny
# le: 15
# prefix: 1.0.0.0/8
# sequence: 5
# - action: deny
# ge: 10
# prefix: 35.0.0.0/8
# sequence: 10
# - action: deny
# ge: 15
# prefix: 12.0.0.0/8
# sequence: 15
# - action: deny
# ge: 20
# le: 21
# prefix: 14.0.0.0/8
# sequence: 20
# name: '10'
# - description: this is test
# entries:
# - action: deny
# ge: 15
# prefix: 12.0.0.0/8
# sequence: 50
# name: test
# - description: this is for prefix-list
# entries:
# - action: deny
# ge: 10
# le: 15
# prefix: 35.0.0.0/8
# sequence: 5
# - action: deny
# ge: 20
# prefix: 35.0.0.0/8
# sequence: 10
# name: test_prefix
# - afi: ipv6
# prefix_lists:
# - description: this is ipv6 prefix-list
# entries:
# - action: deny
# ge: 80
# prefix: 2001:DB8:0:4::/64
# sequence: 10
# name: test_ipv6
# commands:
# - "no ip prefix-list test",
# - "no ip prefix-list 10",
# - "no ip prefix-list test_prefix"
# after:
# - afi: ipv6
# prefix_lists:
# - description: this is ipv6 prefix-list
# entries:
# - action: deny
# ge: 80
# prefix: 2001:DB8:0:4::/64
# sequence: 10
# name: test_ipv6
# After state:
# -------------
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
# Using deleted without any config passed (NOTE: This will delete all Prefix lists configuration from device)
# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
- name: Delete all Prefix lists config
cisco.ios.ios_prefix_lists:
state: deleted
# Commands Fired:
# ---------------
#
# "commands": [
# "no ip prefix-list test",
# "no ip prefix-list 10",
# "no ip prefix-list test_prefix",
# "no ipv6 prefix-list test_ipv6"
# ]
# After state:
# -------------
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# router-ios#
# Using merged
# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ipv6 prefix-list test_ipv6 description this is ipv6
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
- name: Merge provided Prefix lists configuration
cisco.ios.ios_prefix_lists:
config:
- afi: ipv6
prefix_lists:
- name: test_ipv6
description: this is ipv6 merge test
entries:
- action: deny
prefix: 2001:DB8:0:4::/64
ge: 80
le: 100
sequence: 10
state: merged
# After state:
# -------------
#
# Play Execution fails, with error:
# Cannot update existing sequence 10 of Prefix Lists test_ipv6 with state merged.
# Please use state replaced or overridden.
# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ipv6 prefix-list test_ipv6 description this is ipv6
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
- name: Merge provided Prefix lists configuration
cisco.ios.ios_prefix_lists:
config:
- afi: ipv4
prefix_lists:
- name: 10
description: this is new merge test
entries:
- action: deny
prefix: 1.0.0.0/8
le: 15
sequence: 5
- action: deny
prefix: 35.0.0.0/8
ge: 10
sequence: 10
- action: deny
prefix: 12.0.0.0/8
ge: 15
sequence: 15
- action: deny
prefix: 14.0.0.0/8
ge: 20
le: 21
sequence: 20
- name: test
description: this is merge test
entries:
- action: deny
prefix: 12.0.0.0/8
ge: 15
sequence: 50
- name: test_prefix
description: this is for prefix-list
entries:
- action: deny
prefix: 35.0.0.0/8
ge: 10
le: 15
sequence: 5
- action: deny
prefix: 35.0.0.0/8
ge: 20
sequence: 10
- afi: ipv6
prefix_lists:
- name: test_ipv6
description: this is ipv6 merge test
entries:
- action: deny
prefix: 2001:DB8:0:4::/64
ge: 80
le: 100
sequence: 20
state: merged
# Commands Fired:
# ---------------
#
# "commands": [
# "ip prefix-list test description this is merge test",
# "ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15",
# "ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15",
# "ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10",
# "ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15",
# "ip prefix-list 10 description this is new merge test",
# "ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21",
# "ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20",
# "ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15",
# "ip prefix-list test_prefix description this is for prefix-list",
# "ipv6 prefix-list test_ipv6 seq 20 deny 2001:DB8:0:4::/64 ge 80 le 100",
# "ipv6 prefix-list test_ipv6 description this is ipv6 merge test"
# ]
# After state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is new merge test
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is merge test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 merge test
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100
# Using overridden
# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
- name: Override provided Prefix lists configuration
cisco.ios.ios_prefix_lists:
config:
- afi: ipv4
prefix_lists:
- name: 10
description: this is override test
entries:
- action: deny
prefix: 12.0.0.0/8
ge: 15
sequence: 15
- action: deny
prefix: 14.0.0.0/8
ge: 20
le: 21
sequence: 20
- name: test_override
description: this is override test
entries:
- action: deny
prefix: 35.0.0.0/8
ge: 20
sequence: 10
- afi: ipv6
prefix_lists:
- name: test_ipv6
description: this is ipv6 override test
entries:
- action: deny
prefix: 2001:DB8:0:4::/64
ge: 80
le: 100
sequence: 10
state: overridden
# Commands Fired:
# ---------------
#
# "commands": [
# "no ip prefix-list test",
# "no ip prefix-list test_prefix",
# "ip prefix-list 10 description this is override test",
# "no ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10",
# "no ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15",
# "ip prefix-list test_override seq 10 deny 35.0.0.0/8 ge 20",
# "ip prefix-list test_override description this is override test",
# "no ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80",
# "ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100",
# "ipv6 prefix-list test_ipv6 description this is ipv6 override test"
# ]
# After state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is override test
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test_override description this is override test
# ip prefix-list test_override seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 override test
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100
# Using replaced
# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
- name: Replaced provided Prefix lists configuration
cisco.ios.ios_prefix_lists:
config:
- afi: ipv4
prefix_lists:
- name: 10
description: this is replace test
entries:
- action: deny
prefix: 12.0.0.0/8
ge: 15
sequence: 15
- action: deny
prefix: 14.0.0.0/8
ge: 20
le: 21
sequence: 20
- name: test_replace
description: this is replace test
entries:
- action: deny
prefix: 35.0.0.0/8
ge: 20
sequence: 10
- afi: ipv6
prefix_lists:
- name: test_ipv6
description: this is ipv6 replace test
entries:
- action: deny
prefix: 2001:DB8:0:4::/64
ge: 80
le: 100
sequence: 10
state: replaced
# Commands Fired:
# ---------------
# "commands": [
# "ip prefix-list 10 description this is replace test",
# "no ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10",
# "no ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15",
# "ip prefix-list test_replace seq 10 deny 35.0.0.0/8 ge 20",
# "ip prefix-list test_replace description this is replace test",
# "no ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80",
# "ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100",
# "ipv6 prefix-list test_ipv6 description this is ipv6 replace test"
# ]
# After state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is replace test
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ip prefix-list test_replace description this is replace test
# ip prefix-list test_replace seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 replace test
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 le 100
# Using Gathered
# Before state:
# -------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
- name: Gather Prefix lists provided configurations
cisco.ios.ios_prefix_lists:
config:
state: gathered
# Module Execution Result:
# ------------------------
#
# "gathered": [
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "description": "this is test description"
# "entries": [
# {
# "action": "deny",
# "le": 15,
# "prefix": "1.0.0.0/8",
# "sequence": 5
# },
# {
# "action": "deny",
# "ge": 10,
# "prefix": "35.0.0.0/8",
# "sequence": 10
# },
# {
# "action": "deny",
# "ge": 15,
# "prefix": "12.0.0.0/8",
# "sequence": 15
# },
# {
# "action": "deny",
# "ge": 20,
# "le": 21,
# "prefix": "14.0.0.0/8",
# "sequence": 20
# }
# ],
# "name": "10"
# },
# {
# "description": "this is test"
# "entries": [
# {
# "action": "deny",
# "ge": 15,
# "prefix": "12.0.0.0/8",
# "sequence": 50
# }
# ],
# "name": "test"
# },
# {
# "description": "this is for prefix-list"
# "entries": [
# {
# "action": "deny",
# "ge": 10,
# "le": 15,
# "prefix": "35.0.0.0/8",
# "sequence": 5
# },
# {
# "action": "deny",
# "ge": 20,
# "prefix": "35.0.0.0/8",
# "sequence": 10
# }
# ],
# "name": "test_prefix"
# }
# ]
# },
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "description": "this is ipv6 prefix-list"
# "entries": [
# {
# "action": "deny",
# "ge": 80,
# "prefix": "2001:DB8:0:4::/64",
# "sequence": 10
# }
# ],
# "name": "test_ipv6"
# }
# ]
# }
# ]
# After state:
# ------------
#
# router-ios#sh running-config | section ^ip prefix-list|^ipv6 prefix-list
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
# Using Rendered
- name: Render the commands for provided configuration
cisco.ios.ios_prefix_lists:
config:
- afi: ipv4
prefix_lists:
- name: 10
description: this is new merge test
entries:
- action: deny
prefix: 1.0.0.0/8
le: 15
sequence: 5
- action: deny
prefix: 35.0.0.0/8
ge: 10
sequence: 10
- action: deny
prefix: 12.0.0.0/8
ge: 15
sequence: 15
- action: deny
prefix: 14.0.0.0/8
ge: 20
le: 21
sequence: 20
- name: test
description: this is merge test
entries:
- action: deny
prefix: 12.0.0.0/8
ge: 15
sequence: 50
- name: test_prefix
description: this is for prefix-list
entries:
- action: deny
prefix: 35.0.0.0/8
ge: 10
le: 15
sequence: 5
- action: deny
prefix: 35.0.0.0/8
ge: 20
sequence: 10
- afi: ipv6
prefix_lists:
- name: test_ipv6
description: this is ipv6 merge test
entries:
- action: deny
prefix: 2001:DB8:0:4::/64
ge: 80
le: 100
sequence: 10
state: rendered
# Module Execution Result:
# ------------------------
#
# "rendered": [
# "ip prefix-list test description this is test",
# "ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15",
# "ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15",
# "ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10",
# "ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15",
# "ip prefix-list 10 description this is test description",
# "ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21",
# "ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20",
# "ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15",
# "ip prefix-list test_prefix description this is for prefix-list",
# "ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80 l2 100",
# "ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list"
# ]
# Using Parsed
# File: parsed.cfg
# ----------------
#
# ip prefix-list 10 description this is test description
# ip prefix-list 10 seq 5 deny 1.0.0.0/8 le 15
# ip prefix-list 10 seq 10 deny 35.0.0.0/8 ge 10
# ip prefix-list 10 seq 15 deny 12.0.0.0/8 ge 15
# ip prefix-list 10 seq 20 deny 14.0.0.0/8 ge 20 le 21
# ip prefix-list test description this is test
# ip prefix-list test seq 50 deny 12.0.0.0/8 ge 15
# ip prefix-list test_prefix description this is for prefix-list
# ip prefix-list test_prefix seq 5 deny 35.0.0.0/8 ge 10 le 15
# ip prefix-list test_prefix seq 10 deny 35.0.0.0/8 ge 20
# ipv6 prefix-list test_ipv6 description this is ipv6 prefix-list
# ipv6 prefix-list test_ipv6 seq 10 deny 2001:DB8:0:4::/64 ge 80
- name: Parse the provided configuration with the existing running configuration
cisco.ios.ios_prefix_lists:
running_config: "{{ lookup('file', 'parsed.cfg') }}"
state: parsed
# Module Execution Result:
# ------------------------
#
# "parsed": [
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "description": "this is test description"
# "entries": [
# {
# "action": "deny",
# "le": 15,
# "prefix": "1.0.0.0/8",
# "sequence": 5
# },
# {
# "action": "deny",
# "ge": 10,
# "prefix": "35.0.0.0/8",
# "sequence": 10
# },
# {
# "action": "deny",
# "ge": 15,
# "prefix": "12.0.0.0/8",
# "sequence": 15
# },
# {
# "action": "deny",
# "ge": 20,
# "le": 21,
# "prefix": "14.0.0.0/8",
# "sequence": 20
# }
# ],
# "name": "10"
# },
# {
# "description": "this is test"
# "entries": [
# {
# "action": "deny",
# "ge": 15,
# "prefix": "12.0.0.0/8",
# "sequence": 50
# }
# ],
# "name": "test"
# },
# {
# "description": "this is for prefix-list"
# "entries": [
# {
# "action": "deny",
# "ge": 10,
# "le": 15,
# "prefix": "35.0.0.0/8",
# "sequence": 5
# },
# {
# "action": "deny",
# "ge": 20,
# "prefix": "35.0.0.0/8",
# "sequence": 10
# }
# ],
# "name": "test_prefix"
# }
# ]
# },
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "description": "this is ipv6 prefix-list"
# "entries": [
# {
# "action": "deny",
# "ge": 80,
# "prefix": "2001:DB8:0:4::/64",
# "sequence": 10
# }
# ],
# "name": "test_ipv6"
# }
# ]
# }
# ]
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The resulting configuration model invocation. Returned: when changed Sample: |
|
The configuration prior to the model invocation. Returned: always Sample: |
|
The set of commands pushed to the remote device. Returned: always Sample: |