cisco.iosxr.iosxr_user module – Module to manage the aggregates of local users.
Note
This module is part of the cisco.iosxr collection (version 10.2.2).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.iosxr.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.iosxr.iosxr_user.
New in cisco.iosxr 1.0.0
Synopsis
This module provides declarative management of the local usernames configured on network devices. It allows playbooks to manage either individual usernames or the aggregate of usernames in the current running config. It also supports purging usernames from the configuration that are not explicitly defined.
Requirements
The below requirements are needed on the host that executes this module.
ncclient >= 0.5.3 when using netconf
lxml >= 4.1.1 when using netconf
base64 when using public_key_contents or public_key
Parameters
Parameter |
Comments |
|---|---|
Enters into administration configuration mode for making config changes to the device. Applicable only when using network_cli transport Choices:
|
|
The set of username objects to be configured on the remote Cisco IOS XR device. The list entries can either be the username or a hash of username and properties. This argument is mutually exclusive with the |
|
Enters into administration configuration mode for making config changes to the device. Applicable only when using network_cli transport Choices:
|
|
The password to be configured on the Cisco IOS XR device. The password needs to be provided in clear text. Password is encrypted on the device when used with cli and by Ansible when used with netconf using the same MD5 hash technique with salt size of 3. Please note that this option is not same as |
|
Configures the group for the username in the device running configuration. The argument accepts a string value defining the group name. This argument does not check if the group has been configured on the device. |
|
Configures the groups for the username in the device running configuration. The argument accepts a list of group names. This argument does not check if the group has been configured on the device. It is similar to the aggregate command for usernames, but lets you configure multiple groups for the user(s). |
|
The username to be configured on the Cisco IOS XR device. This argument accepts a string value and is mutually exclusive with the |
|
Configures the contents of the public keyfile to upload to the IOS-XR node. This enables users to login using the accompanying private key. IOS-XR only accepts base64 decoded files, so this will be decoded and uploaded to the node. Do note that this requires an OpenSSL public key file, PuTTy generated files will not work! Mutually exclusive with public_key_contents. If used with multiple users in aggregates, then the same key file is used for all users. |
|
Configures the contents of the public keyfile to upload to the IOS-XR node. This enables users to login using the accompanying private key. IOS-XR only accepts base64 decoded files, so this will be decoded and uploaded to the node. Do note that this requires an OpenSSL public key file, PuTTy generated files will not work! Mutually exclusive with public_key.If used with multiple users in aggregates, then the same key file is used for all users. |
|
Configures the state of the username definition as it relates to the device operational configuration. When set to present, the username(s) should be configured in the device active configuration and when set to absent the username(s) should not be in the device active configuration Choices:
|
|
Since passwords are encrypted in the device running config, this argument will instruct the module when to change the password. When set to Choices:
|
|
The password to be configured on the Cisco IOS XR device. The password needs to be provided in clear text. Password is encrypted on the device when used with cli and by Ansible when used with netconf using the same MD5 hash technique with salt size of 3. Please note that this option is not same as |
|
Configures the group for the username in the device running configuration. The argument accepts a string value defining the group name. This argument does not check if the group has been configured on the device. |
|
Configures the groups for the username in the device running configuration. The argument accepts a list of group names. This argument does not check if the group has been configured on the device. It is similar to the aggregate command for usernames, but lets you configure multiple groups for the user(s). |
|
The username to be configured on the Cisco IOS XR device. This argument accepts a string value and is mutually exclusive with the |
|
Configures the contents of the public keyfile to upload to the IOS-XR node. This enables users to login using the accompanying private key. IOS-XR only accepts base64 decoded files, so this will be decoded and uploaded to the node. Do note that this requires an OpenSSL public key file, PuTTy generated files will not work! Mutually exclusive with public_key_contents. If used with multiple users in aggregates, then the same key file is used for all users. |
|
Configures the contents of the public keyfile to upload to the IOS-XR node. This enables users to login using the accompanying private key. IOS-XR only accepts base64 decoded files, so this will be decoded and uploaded to the node. Do note that this requires an OpenSSL public key file, PuTTy generated files will not work! Mutually exclusive with public_key.If used with multiple users in aggregates, then the same key file is used for all users. |
|
Instructs the module to consider the resource definition absolute. It will remove any previously configured usernames on the device with the exception of the `admin` user and the current defined set of users. Choices:
|
|
Configures the state of the username definition as it relates to the device operational configuration. When set to present, the username(s) should be configured in the device active configuration and when set to absent the username(s) should not be in the device active configuration Choices:
|
|
Since passwords are encrypted in the device running config, this argument will instruct the module when to change the password. When set to Choices:
|
Notes
Note
This module works with connection
network_cliandnetconf. See the IOS-XR Platform Options.For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.
Examples
- name: create a new user
cisco.iosxr.iosxr_user:
name: ansible
configured_password: mypassword
state: present
- name: create a new user in admin configuration mode
cisco.iosxr.iosxr_user:
name: ansible
configured_password: mypassword
admin: true
state: present
- name: remove all users except admin
cisco.iosxr.iosxr_user:
purge: true
- name: set multiple users to group sys-admin
cisco.iosxr.iosxr_user:
aggregate:
- name: netop
- name: netend
group: sysadmin
state: present
- name: set multiple users to multiple groups
cisco.iosxr.iosxr_user:
aggregate:
- name: netop
- name: netend
groups:
- sysadmin
- root-system
state: present
- name: Change Password for User netop
cisco.iosxr.iosxr_user:
name: netop
configured_password: '{{ new_password }}'
update_password: always
state: present
- name: Add private key authentication for user netop
cisco.iosxr.iosxr_user:
name: netop
state: present
public_key_contents: "{{ lookup('file', '/home/netop/.ssh/id_rsa.pub' }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The list of configuration mode commands to send to the device Returned: always Sample: |
|
NetConf rpc xml sent to device with transport Returned: always (empty list when no xml rpc to send) Sample: |