cisco.iosxr.iosxr_vrf_global module – Manages global VRF configuration.

Note

This module is part of the cisco.iosxr collection (version 10.2.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_vrf_global.

New in cisco.iosxr 9.0.0

Synopsis

• This module manages VRF configurations on Cisco IOS-XR devices.

• It enables playbooks to handle either individual VRFs or the complete VRF collection.

• It also permits removing non-explicitly stated VRF definitions from the setup.

Parameters

Parameter	Comments
config list / elements=dictionary	A dictionary of options for VRF configurations.
description string	A description for the VRF.
evpn_route_sync integer	EVPN Instance VPN ID used to synchronize the VRF route(s).
fallback_vrf string	Fallback VRF name
mhost dictionary	Multicast host stack options
afi string	Address Family Identifier (AFI) Choices: "ipv4" "ipv6"
default_interface string	Default interface for multicast.
name string / required	Name of the VRF.
rd string	VPN Route Distinguisher (RD).
remote_route_filtering dictionary	Enable/Disable remote route filtering per VRF
disable boolean	Disable remote route filtering per VRF Choices: false true
vpn dictionary	VPN ID for the VRF
id string	VPN ID for the VRF.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config vrf. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config vrf. connection to remote host is not required. The state purged removes all the VRF configurations from the target device. Use caution with this state. The state deleted only removes the VRF attributes that this module manages and does not negate the VRF completely. Thereby, preserving address-family related configurations under VRF context. Refer to examples for more details. Choices: "parsed" "gathered" "deleted" "merged" ← (default) "replaced" "rendered" "overridden" "purged"

Notes

Note

• Tested against Cisco IOS-XR Version 9.0.0

• This module works with connection network_cli.

• See the IOS_XR Platform Options.

• The module examples uses callback plugin (stdout_callback = yaml) to generate task output in yaml format.

Examples

# Using merged
#
# Before state:
# -------------
#
# RP/0/0/CPU0:iosxr-02#show running-config vrf
# Fri Feb  9 07:02:35.789 UTC
# !
# vrf test
#

- name: Merge provided configuration with device configuration
  cisco.iosxr.iosxr_vrf_global:
    config:
      - name: VRF4
        description: VRF4 Description
        evpn_route_sync: 793
        fallback_vrf: "test-vrf"
        remote_route_filtering:
          disable: "true"
        rd: "3:4"
        mhost:
          afi: "ipv4"
          default_interface: "Loopback0"
        vpn:
          id: "2:3"
    state: merged

# Task Output:
# ------------
#
# before: []
#
# commands:
# - vrf VRF4
# - description VRF4 Description
# - evpn-route-sync 793
# - fallback-vrf test-vrf
# - mhost ipv4 default-interface Loopback0
# - rd 3:4
# - remote-route-filtering disable
# - vpn id 2:3
#
# after:
# - name: VRF4
#   description: VRF4 Description
#   evpn_route_sync: 793
#   fallback_vrf: "test-vrf"
#   mhost:
#     afi: "ipv4"
#     default_interface: "Loopback0"
#   rd: "3:4"
#   remote_route_filtering:
#     disable: "true"
#   vpn:
#     id: "2:3"
#
# After state:
# ------------
#
# RP/0/0/CPU0:iosxr-02#show running-config vrf
# Sat Feb 20 03:49:43.618 UTC
# vrf VRF4
#  description "VRF4 Description"
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 793
#  vpn id 2:3
#  fallback-vrf "test-vrf"
#  remote-route-filtering disable
#  rd "3:4"

# Using replaced
#
# Before state:
# -------------
#
# RP/0/0/CPU0:iosxr-02#show running-config vrf
# Sat Feb 20 03:49:43.618 UTC
# vrf VRF4
#  description "VRF4 Description"
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 793
#  vpn id 2:3
#  fallback-vrf "test-vrf"
#  remote-route-filtering disable
#  rd "3:4"

- name: Replace the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_vrf_global:
    config:
      - name: VRF7
        description: VRF7 description
        evpn_route_sync: 398
        fallback_vrf: "replaced-vrf"
        remote_route_filtering:
          disable: "true"
        rd: "67:9"
        mhost:
          afi: "ipv4"
          default_interface: "Loopback0"
        vpn:
          id: "4:5"
    state: replaced

# Task Output:
# ------------
#
# before:
# - name: VRF4
#   description: VRF4 Description
#   evpn_route_sync: 793
#   fallback_vrf: "test-vrf"
#   mhost:
#     afi: "ipv4"
#     default_interface: "Loopback0"
#   rd: "3:4"
#   remote_route_filtering:
#     disable: "true"
#   vpn:
#     id: "2:3"
#
# commands:
# - vrf VRF4
# - no vpn id 2:3
# - vrf VRF7
# - description VRF7 description
# - evpn-route-sync 398
# - fallback-vrf replaced-vrf
# - mhost ipv4 default-interface Loopback0
# - rd 6:9
# - remote-route-filtering disable
# - vpn id 4:5
#
# after:
#   - name: VRF4
#     description: VRF4 Description
#     evpn_route_sync: 793
#     fallback_vrf: "test-vrf"
#     mhost:
#       afi: "ipv4"
#       default_interface: "Loopback0"
#     rd: "3:4"
#     remote_route_filtering:
#       disable: "true"
#   - name: VRF7
#     description: VRF7 description
#     evpn_route_sync: 398
#     fallback_vrf: "replaced-vrf"
#     remote_route_filtering:
#       disable: true
#     rd: "67:9"
#     mhost:
#       afi: "ipv4"
#       default_interface: "Loopback0"
#     vpn:
#       id: "4:5"
#
# After state:
# ------------
#
# RP/0/RP0/CPU0:ios(config)#show running-config vrf
# Sun Mar 10 16:48:53.204 UTC
# vrf VRF4
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 793
#  description VRF4 Description
#  fallback-vrf test-vrf
#  remote-route-filtering disable
#  rd 3:4
# !
# vrf VRF7
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 398
#  description VRF7 description
#  vpn id 4:5
#  fallback-vrf replaced-vrf
#  remote-route-filtering disable
#  rd 67:9
#  !
# !

# Using overridden
#
# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios(config)#show running-config vrf
# Sun Mar 10 16:48:53.204 UTC
# vrf VRF4
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 793
#  description VRF4 Description
#  fallback-vrf test-vrf
#  remote-route-filtering disable
#  rd 3:4
#  !
# !
# vrf VRF7
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 398
#  description VRF7 description
#  vpn id 4:5
#  fallback-vrf replaced-vrf
#  remote-route-filtering disable
#  rd 67:9
#  !
# !

- name: Override the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_vrf_global:
    state: overridden
    config:
      - name: VRF6
        description: VRF6 Description
        evpn_route_sync: 101
        fallback_vrf: "overridden-vrf"
        remote_route_filtering:
          disable: "true"
        rd: "9:8"
        mhost:
          afi: "ipv4"
          default_interface: "Loopback0"
        vpn:
          id: "23:3"

# Task Output:
# ------------
#
# before:
# - name: VRF4
#   description: VRF4 Description
#   evpn_route_sync: 793
#   fallback_vrf: "test-vrf"
#   mhost:
#     afi: "ipv4"
#     default_interface: "Loopback0"
#   rd: "3:4"
#   remote_route_filtering:
#     disable: "true"
# - name: VRF7
#   description: VRF7 description
#   evpn_route_sync: 398
#   fallback_vrf: "replaced-vrf"
#   remote_route_filtering:
#     disable: true
#   rd: "67:9"
#   mhost:
#     afi: "ipv4"
#     default_interface: "Loopback0"
#   vpn:
#     id: "4:5"
#
# commands:
# - vrf VRF4
# - no description VRF4 Description
# - no evpn-route-sync 793
# - no fallback-vrf test-vrf
# - no mhost ipv4 default-interface Loopback0
# - no rd 3:4
# - no remote-route-filtering disable
# - vrf VRF7
# - no description VRF7 description
# - no evpn-route-sync 398
# - no fallback-vrf replaced-vrf
# - no mhost ipv4 default-interface Loopback0
# - no rd 67:9
# - no remote-route-filtering disable
# - no vpn id 4:5
# - vrf VRF6
# - description VRF6 Description
# - evpn-route-sync 101
# - fallback-vrf overridden-vrf
# - mhost ipv4 default-interface Loopback0
# - rd 9:8
# - remote-route-filtering disable
# - vpn id 23:3
#
# after:
# - name: VRF4
# - name: VRF6
#   description: VRF6 Description
#   evpn_route_sync: 101
#   fallback_vrf: "overridden-vrf"
#   remote_route_filtering:
#     disable: "true"
#   rd: "9:8"
#   mhost:
#     afi: "ipv4"
#     default_interface: "Loopback0"
#   vpn:
#     id: "23:3"
# - name: VRF7
#
# After state:
# -------------
# RP/0/RP0/CPU0:ios(config)#show running-config vrf
# Sun Mar 10 16:54:53.007 UTC
# vrf VRF4
# vrf VRF6
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 101
#  description VRF6 Description
#  vpn id 23:3
#  fallback-vrf overridden-vrf
#  remote-route-filtering disable
#  rd 9:8
# vrf VRF7

# Using deleted
#
# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios(config)#show running-config vrf
# Sun Mar 10 16:54:53.007 UTC
# vrf VRF4
# vrf VRF6
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 101
#  description VRF6 Description
#  vpn id 23:3
#  fallback-vrf overridden-vrf
#  remote-route-filtering disable
#  rd 9:8
# vrf VRF7

- name: Delete the provided configuration
  cisco.iosxr.iosxr_vrf_global:
    config:
    state: deleted

# Task Output:
# ------------
#
# before:
# - name: VRF4
# - name: VRF6
#   description: VRF6 Description
#   evpn_route_sync: 101
#   fallback_vrf: "overridden-vrf"
#   remote_route_filtering:
#     disable: "true"
#   rd: "9:8"
#   mhost:
#     afi: "ipv4"
#     default_interface: "Loopback0"
#   vpn:
#     id: "23:3"
# - name: VRF7

# commands:
# - vrf VRF4
# - vrf VRF6
# - no description VRF6 Description
# - no evpn-route-sync 101
# - no fallback-vrf overridden-vrf
# - no mhost ipv4 default-interface Loopback0
# - no rd 9:8
# - no remote-route-filtering disable
# - no vpn id 23:3
# - vrf VRF7
#
# after:
# - name: VRF4
# - name: VRF6
# - name: VRF7
#
# After state:
# ------------
#
# RP/0/RP0/CPU0:ios(config)#show running-config vrf
# Sun Mar 10 17:02:38.981 UTC
# vrf VRF4
# vrf VRF6
# vrf VRF7

# Using purged
#
# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios(config)#show running-config vrf
# vrf VRF4
# vrf VRF6
# vrf VRF7

- name: Purge all the configuration from the device
  cisco.iosxr.iosxr_vrf_global:
    state: purged

# Task Output:
# ------------
#
# before:
# - name: VRF4
# - name: VRF6
# - name: VRF7
#
# commands:
# - no vrf VRF4
# - no vrf VRF6
# - no vrf VRF7
#
# after: []
#
# After state:
# -------------
# RP/0/RP0/CPU0:ios(config)#show running-config vrf
# Sun Mar 10 17:02:38.981 UTC
# -

# Using rendered
#
- name: Render provided configuration with device configuration
  cisco.iosxr.iosxr_vrf_global:
    config:
      - name: VRF4
        description: VRF4 Description
        evpn_route_sync: 793
        fallback_vrf: "test-vrf"
        remote_route_filtering:
          disable: "true"
        rd: "3:4"
        mhost:
          afi: "ipv4"
          default_interface: "Loopback0"
        vpn:
          id: "2:3"
    state: rendered

# Task Output:
# ------------
#
# rendered:
# - vrf VRF4
# - description VRF4 Description
# - evpn-route-sync 793
# - fallback-vrf test-vrf
# - mhost ipv4 default-interface Loopback0
# - rd 3:4
# - remote-route-filtering disable
# - vpn id 2:3

# Using gathered
#
# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios(config)#show running-config vrf
# Sun Mar 10 17:02:38.981 UTC
# vrf VRF4
#  description "VRF4 Description"
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 793
#  vpn id 2:3
#  fallback-vrf "test-vrf"
#  remote-route-filtering disable
#  rd "3:4"

- name: Gather existing running configuration
  cisco.iosxr.iosxr_vrf_global:
    state: gathered

# Task Output:
# ------------
#
# gathered:
# - name: VRF4
#   description: VRF4 Description
#   evpn_route_sync: 793
#   fallback_vrf: "test-vrf"
#   mhost:
#     afi: "ipv4"
#     default_interface: "Loopback0"
#   rd: "3:4"
#   remote_route_filtering:
#     disable: "true"
#   vpn:
#     id: "2:3"

# Using parsed
#
# File: parsed.cfg
# ----------------
#
# vrf test
#  description "This is test VRF"
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 456
#  vpn id 56
#  fallback-vrf "test-vrf"
#  remote-route-filtering disable
#  rd "testing"
#  !
# !
# vrf my_vrf
#  mhost ipv4 default-interface Loopback0
#  evpn-route-sync 235
#  description "this is sample vrf for feature testing"
#  fallback-vrf "parsed-vrf"
#  rd "2:3"
#  remote-route-filtering disable
#  vpn id 23
#  !
# !

- name: Parse the provided configuration
  cisco.iosxr.iosxr_vrf_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task Output:
# ------------
#
# parsed:
# - description: This is test VRF
#   evpn_route_sync: 456
#   fallback_vrf: test-vrf
#   mhost:
#     afi: ipv4
#     default_interface: Loopback0
#   name: test
#   rd: testing
#   remote_route_filtering:
#     disable: true
#   vpn:
#     id: '56'
# - description: this is sample vrf for feature testing
#   evpn_route_sync: 235
#   fallback_vrf: parsed-vrf
#   mhost:
#     afi: ipv4
#     default_interface: Loopback0
#   name: my_vrf
#   rd: '2:3'
#   remote_route_filtering:
#     disable: true
#   vpn:
#     id: '23'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"
before dictionary	The configuration prior to the model invocation. Returned: always Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: ["vrf VRF7", "description VRF7 description", {"rd": 4029}, "fallback-vrf replaced-vrf"]
gathered list / elements=string	Facts about the network resource gathered from the remote device as structured data. Returned: when state is gathered Sample: ["This output will always be in the same format as the module argspec.\n"]
parsed list / elements=string	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is parsed Sample: ["This output will always be in the same format as the module argspec.\n"]
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is rendered Sample: ["vrf VRF4", "description VRF4 Description", "evpn-route-sync 793", "fallback-vrf parsed-vrf"]

Authors

• Ruchi Pakhle (@Ruchip16)

Collection links

• Issue Tracker
• Repository (Sources)