cisco.ise.active_directory_add_groups module – Resource module for Active Directory Add Groups

Note

This module is part of the cisco.ise collection (version 2.9.5).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ise. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.ise.active_directory_add_groups.

New in cisco.ise 1.0.0

Synopsis 

Manage operation update of the resource Active Directory Add Groups.
This API loads domain groups configuration from Active Directory into Cisco.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

ciscoisesdk >= 2.2.3
python >= 3.5

Parameters 

Parameter	Comments
adAttributes dictionary	Holds list of AD Attributes.
attributes list / elements=dictionary	List of Attributes.
defaultValue string	Required for each attribute in the attribute list. Can contain an empty string. All characters are allowed except <%”.
internalName string	Required for each attribute in the attribute list. All characters are allowed except <%”.
name string	Required for each attribute in the attribute list with no duplication between attributes. All characters are allowed except <%”.
type string	Required for each group in the group list. Allowed values STRING, IP, BOOLEAN, INT, OCTET_STRING.
adgroups dictionary	Holds list of AD Groups.
groups list / elements=dictionary	List of Groups.
name string	Required for each group in the group list with no duplication between groups. All characters are allowed except %.
sid string	Cisco ISE uses security identifiers (SIDs) for optimization of group membership evaluation. SIDs are useful for efficiency (speed) when the groups are evaluated. All characters are allowed except %.
type string	No character restriction.
adScopesNames string	String that contains the names of the scopes that the active directory belongs to. Names are separated by comma. Alphanumeric, underscore (_) characters are allowed.
advancedSettings dictionary	Active Directory Add Groups’s advancedSettings.
agingTime integer	Range 1-8760 hours.
authProtectionType string	Enable prevent AD account lockout. Allowed values - WIRELESS, - WIRED, - BOTH.
country string	User info attribute. All characters are allowed except %.
department string	User info attribute. All characters are allowed except %.
email string	User info attribute. All characters are allowed except %.
enableCallbackForDialinClient boolean	EnableCallbackForDialinClient flag. Choices: `false` `true`
enableDialinPermissionCheck boolean	EnableDialinPermissionCheck flag. Choices: `false` `true`
enableFailedAuthProtection boolean	Enable prevent AD account lockout due to too many bad password attempts. Choices: `false` `true`
enableMachineAccess boolean	EnableMachineAccess flag. Choices: `false` `true`
enableMachineAuth boolean	EnableMachineAuth flag. Choices: `false` `true`
enablePassChange boolean	EnablePassChange flag. Choices: `false` `true`
enableRewrites boolean	EnableRewrites flag. Choices: `false` `true`
failedAuthThreshold integer	Number of bad password attempts.
firstName string	User info attribute. All characters are allowed except %.
identityNotInAdBehaviour string	Allowed values REJECT, SEARCH_JOINED_FOREST, SEARCH_ALL.
jobTitle string	User info attribute. All characters are allowed except %.
lastName string	User info attribute. All characters are allowed except %.
locality string	User info attribute. All characters are allowed except %.
organizationalUnit string	User info attribute. All characters are allowed except %.
plaintextAuth boolean	PlaintextAuth flag. Choices: `false` `true`
rewriteRules list / elements=dictionary	Identity rewrite is an advanced feature that directs Cisco ISE to manipulate the identity before it is passed to the external Active Directory system. You can create rules to change the identity to a desired format that includes or excludes a domain prefix and/or suffix or other additional markup of your choice.
rewriteMatch string	Required for each rule in the list with no duplication between rules. All characters are allowed except %”.
rewriteResult string	Required for each rule in the list. All characters are allowed except %”.
rowId integer	Required for each rule in the list in serial order.
schema string	Allowed values ACTIVE_DIRECTORY, CUSTOM. Choose ACTIVE_DIRECTORY schema when the AD attributes defined in AD can be copied to relevant attributes in Cisco ISE. If customization is needed, choose CUSTOM schema. All User info attributes are always set to default value if schema is ACTIVE_DIRECTORY. Values can be changed only for CUSTOM schema.
stateOrProvince string	User info attribute. All characters are allowed except %.
streetAddress string	User info attribute. All characters are allowed except %.
telephone string	User info attribute. All characters are allowed except %.
unreachableDomainsBehaviour string	Allowed values PROCEED, DROP.
description string	No character restriction.
domain string	The AD domain. Alphanumeric, hyphen (-) and dot (.) characters are allowed.
enableDomainWhiteList boolean	EnableDomainWhiteList flag. Choices: `false` `true`
id string	Resource UUID value.
ise_debug boolean	Flag for Identity Services Engine SDK to enable debugging. Choices: `false` ← (default) `true`
ise_hostname string / required	The Identity Services Engine hostname.
ise_password string / required	The Identity Services Engine password to authenticate.
ise_single_request_timeout integer added in cisco.ise 3.0.0	Timeout (in seconds) for RESTful HTTP requests. Default: `60`
ise_username string / required	The Identity Services Engine username to authenticate.
ise_uses_api_gateway boolean added in cisco.ise 1.1.0	Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices: `false` `true` ← (default)
ise_uses_csrf_token boolean added in cisco.ise 3.0.0	Flag that informs the SDK whether we send the CSRF token to ISE’s ERS APIs. If it is True, the SDK assumes that your ISE CSRF Check is enabled. If it is True, it assumes you need the SDK to manage the CSRF token automatically for you. Choices: `false` ← (default) `true`
ise_verify boolean	Flag to enable or disable SSL certificate verification. Choices: `false` `true` ← (default)
ise_version string	Informs the SDK which version of Identity Services Engine to use. Default: `"3.1_Patch_1"`
ise_wait_on_rate_limit boolean	Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices: `false` `true` ← (default)
name string	Resource Name. Maximum 32 characters allowed. Allowed characters are alphanumeric and .-_/\\ characters.

Notes 

Note

SDK Method used are active_directory.ActiveDirectory.load_groups_from_domain,
Paths used are put /ers/config/activedirectory/{id}/addGroups,
Does not support check_mode
The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco ISE SDK
The parameters starting with ise_ are used by the Cisco ISE Python SDK to establish the connection

Examples 

- name: Update all
  cisco.ise.active_directory_add_groups:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    adAttributes:
      attributes:
      - defaultValue: string
        internalName: string
        name: string
        type: string
    adScopesNames: string
    adgroups:
      groups:
      - name: string
        sid: string
        type: string
    advancedSettings:
      agingTime: 0
      authProtectionType: string
      country: string
      department: string
      email: string
      enableCallbackForDialinClient: true
      enableDialinPermissionCheck: true
      enableFailedAuthProtection: true
      enableMachineAccess: true
      enableMachineAuth: true
      enablePassChange: true
      enableRewrites: true
      failedAuthThreshold: 0
      firstName: string
      identityNotInAdBehaviour: string
      jobTitle: string
      lastName: string
      locality: string
      organizationalUnit: string
      plaintextAuth: true
      rewriteRules:
      - rewriteMatch: string
        rewriteResult: string
        rowId: 0
      schema: string
      stateOrProvince: string
      streetAddress: string
      telephone: string
      unreachableDomainsBehaviour: string
    description: string
    domain: string
    enableDomainWhiteList: true
    id: string
    name: string

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
ise_response dictionary	A dictionary or list with the response returned by the Cisco ISE Python SDK Returned: always Sample: `{}`

Authors

Rafael Campos (@racampos)

cisco.ise.active_directory_add_groups module – Resource module for Active Directory Add Groups

Synopsis

Requirements

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

Examples 

Return Values 