cisco.nxos.nxos_ospf_interfaces module – OSPF Interfaces Resource Module.
Note
This module is part of the cisco.nxos collection (version 9.2.1).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.nxos.
To use it in a playbook, specify: cisco.nxos.nxos_ospf_interfaces.
New in cisco.nxos 1.3.0
Synopsis
This module manages OSPF(v2/v3) configuration of interfaces on devices running Cisco NX-OS.
Parameters
Parameter |
Comments |
|---|---|
A list of OSPF configuration for interfaces. |
|
OSPF settings on the interfaces in address-family context. |
|
Address Family Identifier (AFI) for OSPF settings on the interfaces. Choices:
|
|
Authentication settings on the interface. |
|
Enable/disable authentication on the interface. Choices:
|
|
Authentication password key-chain. |
|
Use message-digest authentication. Choices:
|
|
Use null(disable) authentication. Choices:
|
|
Configure the authentication key for the interface. |
|
0 Specifies an UNENCRYPTED authentication key will follow. 3 Specifies an 3DES ENCRYPTED authentication key will follow. 7 Specifies a Cisco type 7 ENCRYPTED authentication key will follow. |
|
Authentication key. Valid values are Cisco type 7 ENCRYPTED password, 3DES ENCRYPTED password and UNENCRYPTED (cleartext) password based on the value of encryption key. |
|
Cost associated with interface. |
|
Dead interval value (in seconds). |
|
Set passive-interface attribute on this interface to default. This option is mutually exclusive with passive_interface. Choices:
|
|
Hello interval value (in seconds). |
|
Instance identifier. |
|
Message digest authentication password (key) settings. |
|
0 Specifies an UNENCRYPTED ospf password (key) will follow. 3 Specifies an 3DES ENCRYPTED ospf password (key) will follow. 7 Specifies a Cisco type 7 ENCRYPTED the ospf password (key) will follow. |
|
Authentication key. Valid values are Cisco type 7 ENCRYPTED password, 3DES ENCRYPTED password and UNENCRYPTED (cleartext) password based on the value of encryption key. |
|
Key ID. |
|
Enable/disable OSPF MTU mismatch detection. Choices:
|
|
Multi-Areas associated with interface (not tied to OSPF process). Valid values are Area Ids as an integer or IP address. |
|
Network type. Choices:
|
|
Suppress routing updates on the interface. This option is mutually exclusive with default_passive_interface. Choices:
|
|
Router priority. |
|
Interfaces configuration for an OSPF process. |
|
Area associated with interface. |
|
Area ID in IP address format. |
|
Do not include secondary IPv4/IPv6 addresses. Choices:
|
|
Multi-Areas associated with interface. Valid values are Area Ids as an integer or IP address. |
|
OSPF process tag. |
|
Packet retransmission interval. |
|
Shutdown OSPF on this interface. Choices:
|
|
Packet transmission delay. |
|
Name/Identifier of the interface. |
|
This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config | section “^interface”. The state parsed reads the configuration from |
|
The state the configuration should be left in. Choices:
|
Notes
Note
Unsupported for Cisco MDS
Examples
# Using merged
# Before state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# no switchport
- name: Merge the provided configuration with the existing running configuration
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: '100'
area:
area_id: 1.1.1.1
secondaries: false
multi_areas:
- 11.11.11.11
- afi: ipv6
processes:
- process_id: '200'
area:
area_id: 2.2.2.2
multi_areas:
- 21.0.0.0
- process_id: '300'
multi_areas:
- 50.50.50.50
multi_areas:
- 16.10.10.10
- name: Ethernet1/2
address_family:
- afi: ipv4
authentication:
enable: true
key_chain: test-1
message_digest_key:
key_id: 10
encryption: 3
key: abc01d272be25d29
cost: 100
- afi: ipv6
network: broadcast
shutdown: true
- name: Ethernet1/3
address_family:
- afi: ipv4
authentication_key:
encryption: 7
key: 12090404011C03162E
state: merged
# Task output:
# ------------
# before:
# - name: Ethernet1/1
# - name: Ethernet1/2
# - name: Ethernet1/3
#
# commands:
# - interface Ethernet1/1
# - ip router ospf multi-area 11.11.11.11
# - ip router ospf 100 area 1.1.1.1 secondaries none
# - ipv6 router ospfv3 multi-area 16.10.10.10
# - ipv6 router ospfv3 200 area 2.2.2.2
# - ipv6 router ospfv3 200 multi-area 21.0.0.0
# - ipv6 router ospfv3 300 multi-area 50.50.50.50
# - interface Ethernet1/2
# - ip ospf authentication key-chain test-1
# - ip ospf authentication
# - ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# - ip ospf cost 100
# - ospfv3 network broadcast
# - ospfv3 shutdown
# - interface Ethernet1/3
# - ip ospf authentication-key 7 12090404011C03162E
#
# after:
# - address_family:
# - afi: ipv4
# multi_areas:
# - 11.11.11.11
# processes:
# - area:
# area_id: 1.1.1.1
# secondaries: false
# process_id: '100'
# - afi: ipv6
# multi_areas:
# - 16.10.10.10
# processes:
# - area:
# area_id: 2.2.2.2
# multi_areas:
# - 21.0.0.0
# process_id: '200'
# - multi_areas:
# - 50.50.50.50
# process_id: '300'
# name: Ethernet1/1
# - address_family:
# - afi: ipv4
# authentication:
# enable: true
# key_chain: test-1
# cost: 100
# message_digest_key:
# encryption: 3
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# key_id: 10
# - afi: ipv6
# network: broadcast
# shutdown: true
# name: Ethernet1/2
# - address_family:
# - afi: ipv4
# authentication_key:
# encryption: 7
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# name: Ethernet1/3
# After state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
# Using replaced
# Before state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Replace OSPF configurations of listed interfaces with provided configurations
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: false
multi_areas:
- 11.11.11.12
- name: Ethernet1/3
state: replaced
# Task output:
# ------------
# before:
# - address_family:
# - afi: ipv4
# multi_areas:
# - 11.11.11.11
# processes:
# - area:
# area_id: 1.1.1.1
# secondaries: false
# process_id: '100'
# - afi: ipv6
# multi_areas:
# - 16.10.10.10
# processes:
# - area:
# area_id: 2.2.2.2
# multi_areas:
# - 21.0.0.0
# process_id: '200'
# - multi_areas:
# - 50.50.50.50
# process_id: '300'
# name: Ethernet1/1
# - address_family:
# - afi: ipv4
# authentication:
# enable: true
# key_chain: test-1
# cost: 100
# message_digest_key:
# encryption: 3
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# key_id: 10
# - afi: ipv6
# network: broadcast
# shutdown: true
# name: Ethernet1/2
# - address_family:
# - afi: ipv4
# authentication_key:
# encryption: 7
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# name: Ethernet1/3
#
# commands:
# - interface Ethernet1/1
# - ip router ospf multi-area 11.11.11.12
# - no ip router ospf multi-area 11.11.11.11
# - no ipv6 router ospfv3 multi-area 16.10.10.10
# - no ipv6 router ospfv3 200 area 2.2.2.2
# - no ipv6 router ospfv3 200 multi-area 21.0.0.0
# - no ipv6 router ospfv3 300 multi-area 50.50.50.50
# - interface Ethernet1/3
# - no ip ospf authentication-key 7 12090404011C03162E
#
# after:
# - address_family:
# - afi: ipv4
# multi_areas:
# - 11.11.11.12
# processes:
# - area:
# area_id: 1.1.1.1
# secondaries: false
# process_id: '100'
# name: Ethernet1/1
# - address_family:
# - afi: ipv4
# authentication:
# enable: true
# key_chain: test-1
# cost: 100
# message_digest_key:
# encryption: 3
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# key_id: 10
# - afi: ipv6
# network: broadcast
# shutdown: true
# name: Ethernet1/2
# - name: Ethernet1/3
#
# After state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.12
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# Using overridden
# Before state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Override all OSPF interfaces configuration with provided configuration
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: "100"
area:
area_id: 1.1.1.1
secondaries: false
multi_areas:
- 11.11.11.12
state: overridden
# Task output:
# ------------
# before:
# - address_family:
# - afi: ipv4
# multi_areas:
# - 11.11.11.11
# processes:
# - area:
# area_id: 1.1.1.1
# secondaries: false
# process_id: '100'
# - afi: ipv6
# multi_areas:
# - 16.10.10.10
# processes:
# - area:
# area_id: 2.2.2.2
# multi_areas:
# - 21.0.0.0
# process_id: '200'
# - multi_areas:
# - 50.50.50.50
# process_id: '300'
# name: Ethernet1/1
# - address_family:
# - afi: ipv4
# authentication:
# enable: true
# key_chain: test-1
# cost: 100
# message_digest_key:
# encryption: 3
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# key_id: 10
# - afi: ipv6
# network: broadcast
# shutdown: true
# name: Ethernet1/2
# - address_family:
# - afi: ipv4
# authentication_key:
# encryption: 7
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# name: Ethernet1/3
#
# commands:
# - interface Ethernet1/2
# - no ip ospf authentication key-chain test-1
# - no ip ospf authentication
# - no ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# - no ip ospf cost 100
# - no ospfv3 network broadcast
# - no ospfv3 shutdown
# - interface Ethernet1/3
# - no ip ospf authentication-key 7 12090404011C03162E
# - interface Ethernet1/1
# - ip router ospf multi-area 11.11.11.12
# - no ip router ospf multi-area 11.11.11.11
# - no ipv6 router ospfv3 multi-area 16.10.10.10
# - no ipv6 router ospfv3 200 area 2.2.2.2
# - no ipv6 router ospfv3 200 multi-area 21.0.0.0
# - no ipv6 router ospfv3 300 multi-area 50.50.50.50
#
# after:
# - address_family:
# - afi: ipv4
# multi_areas:
# - 11.11.11.12
# processes:
# - area:
# area_id: 1.1.1.1
# secondaries: false
# process_id: '100'
# name: Ethernet1/1
# - name: Ethernet1/2
# - name: Ethernet1/3
# After state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.12
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# no switchport
# Using deleted to delete OSPF config of a single interface
# Before state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Delete OSPF config from a single interface
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
state: deleted
# Task output:
# ------------
# before:
# - address_family:
# - afi: ipv4
# multi_areas:
# - 11.11.11.11
# processes:
# - area:
# area_id: 1.1.1.1
# secondaries: false
# process_id: '100'
# - afi: ipv6
# multi_areas:
# - 16.10.10.10
# processes:
# - area:
# area_id: 2.2.2.2
# multi_areas:
# - 21.0.0.0
# process_id: '200'
# - multi_areas:
# - 50.50.50.50
# process_id: '300'
# name: Ethernet1/1
# - address_family:
# - afi: ipv4
# authentication:
# enable: true
# key_chain: test-1
# cost: 100
# message_digest_key:
# encryption: 3
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# key_id: 10
# - afi: ipv6
# network: broadcast
# shutdown: true
# name: Ethernet1/2
# - address_family:
# - afi: ipv4
# authentication_key:
# encryption: 7
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# name: Ethernet1/3
#
# commands:
# - interface Ethernet1/1
# - no ip router ospf multi-area 11.11.11.11
# - no ip router ospf 100 area 1.1.1.1 secondaries none
# - no ipv6 router ospfv3 multi-area 16.10.10.10
# - no ipv6 router ospfv3 200 area 2.2.2.2
# - no ipv6 router ospfv3 200 multi-area 21.0.0.0
# - no ipv6 router ospfv3 300 multi-area 50.50.50.50
#
# after:
# - name: Ethernet1/1
# - address_family:
# - afi: ipv4
# authentication:
# enable: true
# key_chain: test-1
# cost: 100
# message_digest_key:
# encryption: 3
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# key_id: 10
# - afi: ipv6
# network: broadcast
# shutdown: true
# name: Ethernet1/2
# - address_family:
# - afi: ipv4
# authentication_key:
# encryption: 7
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# name: Ethernet1/3
# After state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
# Using deleted to delete OSPF config from all interfaces
# Before state:
# -------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 multi-area 16.10.10.10
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# ip ospf authentication-key 7 12090404011C03162E
- name: Delete OSPF config from all interfaces
cisco.nxos.nxos_ospf_interfaces:
state: deleted
# Task output:
# ------------
# before:
# - name: Ethernet1/1
# - address_family:
# - afi: ipv4
# authentication:
# enable: true
# key_chain: test-1
# cost: 100
# message_digest_key:
# encryption: 3
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# key_id: 10
# - afi: ipv6
# network: broadcast
# shutdown: true
# name: Ethernet1/2
# - address_family:
# - afi: ipv4
# authentication_key:
# encryption: 7
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# name: Ethernet1/3
#
# commands:
# - interface Ethernet1/1
# - no ip router ospf multi-area 11.11.11.11
# - no ip router ospf 100 area 1.1.1.1 secondaries none
# - no ipv6 router ospfv3 multi-area 16.10.10.10
# - no ipv6 router ospfv3 200 area 2.2.2.2
# - no ipv6 router ospfv3 200 multi-area 21.0.0.0
# - no ipv6 router ospfv3 300 multi-area 50.50.50.50
# - interface Ethernet1/2
# - no ip ospf authentication key-chain test-1
# - no ip ospf authentication
# - no ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# - no ip ospf cost 100
# - no ospfv3 network broadcast
# - no ospfv3 shutdown
# - interface Ethernet1/3
# - no ip ospf authentication-key 7 12090404011C03162E
#
# after:
# - name: Ethernet1/1
# - name: Ethernet1/2
# - name: Ethernet1/3
# After state:
# ------------
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# no switchport
# Using rendered
- name: >-
Render platform specific configuration lines with state rendered (without
connecting to the device)
cisco.nxos.nxos_ospf_interfaces:
config:
- name: Ethernet1/1
address_family:
- afi: ipv4
processes:
- process_id: '100'
area:
area_id: 1.1.1.1
secondaries: false
multi_areas:
- 11.11.11.11
- afi: ipv6
processes:
- process_id: '200'
area:
area_id: 2.2.2.2
multi_areas:
- 21.0.0.0
- process_id: '300'
multi_areas:
- 50.50.50.50
multi_areas:
- 16.10.10.10
- name: Ethernet1/2
address_family:
- afi: ipv4
authentication:
enable: true
key_chain: test-1
message_digest_key:
key_id: 10
encryption: 3
key: abc01d272be25d29
cost: 100
- afi: ipv6
network: broadcast
shutdown: true
- name: Ethernet1/3
address_family:
- afi: ipv4
authentication_key:
encryption: 7
key: 12090404011C03162E
state: rendered
# Task Output:
# ------------
# rendered:
# - interface Ethernet1/1
# - ip router ospf multi-area 11.11.11.11
# - ip router ospf 100 area 1.1.1.1 secondaries none
# - ipv6 router ospfv3 multi-area 16.10.10.10
# - ipv6 router ospfv3 200 area 2.2.2.2
# - ipv6 router ospfv3 200 multi-area 21.0.0.0
# - ipv6 router ospfv3 300 multi-area 50.50.50.50
# - interface Ethernet1/2
# - ip ospf authentication key-chain test-1
# - ip ospf authentication
# - ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# - ip ospf cost 100
# - ospfv3 network broadcast
# - ospfv3 shutdown
# - interface Ethernet1/3
# - ip ospf authentication-key 7 12090404011C03162E
# Using parsed
# parsed.cfg
# ------------
# interface Ethernet1/1
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.11
# ipv6 router ospfv3 200 area 2.2.2.2
# ipv6 router ospfv3 200 multi-area 21.0.0.0
# ipv6 router ospfv3 300 multi-area 50.50.50.50
# ipv6 router ospfv3 multi-area 16.10.10.10
# interface Ethernet1/2
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# ip ospf authentication-key 7 12090404011C03162E
- name: arse externally provided OSPF interfaces config
cisco.nxos.nxos_ospf_interfaces:
running_config: "{{ lookup('file', 'ospf_interfaces.cfg') }}"
state: parsed
# Task output:
# ------------
# parsed:
# - address_family:
# - afi: ipv4
# multi_areas:
# - 11.11.11.11
# processes:
# - area:
# area_id: 1.1.1.1
# secondaries: false
# process_id: '100'
# - afi: ipv6
# multi_areas:
# - 16.10.10.10
# processes:
# - area:
# area_id: 2.2.2.2
# multi_areas:
# - 21.0.0.0
# process_id: '200'
# - multi_areas:
# - 50.50.50.50
# process_id: '300'
# name: Ethernet1/1
# - address_family:
# - afi: ipv4
# authentication:
# enable: true
# key_chain: test-1
# cost: 100
# message_digest_key:
# encryption: 3
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# key_id: 10
# - afi: ipv6
# network: broadcast
# shutdown: true
# name: Ethernet1/2
# - address_family:
# - afi: ipv4
# authentication_key:
# encryption: 7
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# name: Ethernet1/3
# Using gathered
# On-box config
# NXOS# show running-config | section ^interface
# interface Ethernet1/1
# no switchport
# ip router ospf 100 area 1.1.1.1 secondaries none
# ip router ospf multi-area 11.11.11.12
# interface Ethernet1/2
# no switchport
# ip ospf authentication
# ip ospf authentication key-chain test-1
# ip ospf message-digest-key 10 md5 3 abc01d272be25d29
# ip ospf cost 100
# ospfv3 network broadcast
# ospfv3 shutdown
# interface Ethernet1/3
# no switchport
# Task output:
# ------------
# gathered:
# - address_family:
# - afi: ipv4
# multi_areas:
# - 11.11.11.12
# processes:
# - area:
# area_id: 1.1.1.1
# secondaries: false
# process_id: '100'
# name: Ethernet1/1
# - address_family:
# - afi: ipv4
# authentication:
# enable: true
# key_chain: test-1
# cost: 100
# message_digest_key:
# encryption: 3
# key: VALUE_SPECIFIED_IN_NO_LOG_PARAMETER
# key_id: 10
# - afi: ipv6
# network: broadcast
# shutdown: true
# name: Ethernet1/2
# - name: Ethernet1/3
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The resulting configuration model invocation. Returned: when changed Sample: |
|
The configuration prior to the model invocation. Returned: always Sample: |
|
The set of commands pushed to the remote device. Returned: always Sample: |
|
Facts about the network resource gathered from the remote device as structured data. Returned: when state is Sample: |
|
The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is Sample: |
|
The provided configuration in the task rendered in device-native format (offline). Returned: when state is Sample: |