cisco.nxos.nxos_route_maps module – Route Maps resource module.

Note

This module is part of the cisco.nxos collection (version 9.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_route_maps.

New in cisco.nxos 2.2.0

Synopsis

• This module manages route maps configuration on devices running Cisco NX-OS.

Parameters

Parameter	Comments
config list / elements=dictionary	A list of route-map configuration.
entries list / elements=dictionary	List of entries (identified by sequence number) for this route-map.
action string	Route map denies or permits set operations. Choices: "deny" "permit"
continue_sequence integer	Continue on a different entry within the route-map.
description string	Description of the route-map.
match dictionary	Match values from routing table.
as_number dictionary	Match BGP peer AS number.
as_path_list list / elements=string	AS path access list name.
asn list / elements=string	AS number.
as_path list / elements=string	Match BGP AS path access-list.
community dictionary	Match BGP community list.
community_list list / elements=string	Community list.
exact_match boolean	Do exact matching of communities. Choices: false true
evpn dictionary	Match BGP EVPN Routes.
route_types list / elements=string	Match route type for evpn route.
extcommunity dictionary	Match BGP community list.
exact_match boolean	Do exact matching of extended communities. Choices: false true
extcommunity_list list / elements=string	Extended Community list.
interfaces list / elements=string	Match first hop interface of route.
ip dictionary	Configure IP specific information.
address dictionary	Match address of route or match packet.
access_list string	IP access-list name (for use in route-maps for PBR only).
prefix_lists list / elements=string	Match entries of prefix-lists.
multicast dictionary	Match multicast attributes.
group dictionary	Multicast Group prefix. Mutually exclusive with group_range.
prefix string	IPv4 group prefix.
group_range dictionary	Multicast Group address range. Mutually exclusive with group.
first string	First Group address.
last string	Last Group address.
rp dictionary	Rendezvous point.
prefix string	IPv4 rendezvous prefix.
rp_type string	Multicast rendezvous point type. Choices: "ASM" "Bidir"
source string	Multicast source address.
next_hop dictionary	Match next-hop address of route.
prefix_lists list / elements=string	Match entries of prefix-lists.
route_source dictionary	Match advertising source address of route.
prefix_lists list / elements=string	Match entries of prefix-lists.
ipv6 dictionary	Configure IPv6 specific information.
address dictionary	Match address of route or match packet.
access_list string	IP access-list name (for use in route-maps for PBR only).
prefix_lists list / elements=string	Match entries of prefix-lists.
multicast dictionary	Match multicast attributes.
group dictionary	Multicast Group prefix. Mutually exclusive with group_range.
prefix string	IPv4 group prefix.
group_range dictionary	Multicast Group address range. Mutually exclusive with group.
first string	First Group address.
last string	Last Group address.
rp dictionary	Rendezvous point.
prefix string	IPv4 rendezvous prefix.
rp_type string	Multicast rendezvous point type. Choices: "ASM" "Bidir"
source string	Multicast source address.
next_hop dictionary	Match next-hop address of route.
prefix_lists list / elements=string	Match entries of prefix-lists.
route_source dictionary	Match advertising source address of route.
prefix_lists list / elements=string	Match entries of prefix-lists.
mac_list list / elements=string	Match entries of mac-lists.
metric list / elements=integer	Match metric of route.
ospf_area list / elements=integer	Match ospf area.
route_types list / elements=string	Match route-type of route. Choices: "external" "inter-area" "internal" "intra-area" "level-1" "level-2" "local" "nssa-external" "type-1" "type-2"
source_protocol list / elements=string	Match source protocol.
tags list / elements=integer	Match tag of route.
sequence integer	Sequence to insert to/delete from existing route-map entry.
set dictionary	Set values in destination routing protocol.
as_path dictionary	Prepend string for a BGP AS-path attribute.
prepend dictionary	Prepend to the AS-Path.
as_number list / elements=string	AS number.
last_as integer	Number of last-AS prepends.
tag boolean	Set the tag as an AS-path attribute. Choices: false true
comm_list string	Set BGP community list (for deletion).
community dictionary	Set BGP community attribute.
additive boolean	Add to existing community. Choices: false true
graceful_shutdown boolean	Graceful Shutdown (well-known community). Choices: false true
internet boolean	Internet (well-known community). Choices: false true
local_as boolean	Do not send outside local AS (well-known community). Choices: false true
no_advertise boolean	Do not advertise to any peer (well-known community). Choices: false true
no_export boolean	Do not export to next AS (well-known community). Choices: false true
number list / elements=string	Community number aa:nn format
dampening dictionary	Set BGP route flap dampening parameters.
half_life integer	Half-life time for the penalty.
max_suppress_time integer	Maximum suppress time for stable route.
start_reuse_route integer	Value to start reusing a route.
start_suppress_route integer	Value to start suppressing a route.
distance dictionary	Configure administrative distance.
igp_ebgp_routes integer	Administrative distance for IGP or EBGP routes
internal_routes integer	Distance for internal routes.
local_routes integer	Distance for local routes.
evpn dictionary	Set BGP EVPN Routes.
gateway_ip dictionary	Set gateway IP for type 5 EVPN routes. Cannot set ip and use-nexthop in the same route-map sequence.
ip string	Gateway IP address.
use_nexthop boolean	Use nexthop address as gateway IP. Choices: false true
extcomm_list string	Set BGP extcommunity list (for deletion).
extcommunity dictionary	Set BGP extcommunity attribute.
rt dictionary	Route-Target.
additive boolean	Add to existing rt extcommunity. Choices: false true
extcommunity_numbers list / elements=string	Extcommunity number. Supported formats are ASN2:NN, ASN4:NN, IPV4:NN.
forwarding_address boolean	Set the forwarding address. Choices: false true
ip dictionary	Configure IP features.
address dictionary	Specify IP address.
prefix_list string	Name of prefix list (Max Size 63).
next_hop dictionary	Set next-hop IP address (for policy-based routing)
address string	Set space-separated list of next-hop IP addresses. Address ordering is important. Also don`t use unnecessary spaces.
drop_on_fail boolean	Drop packets instead of using default routing when the configured next hop becomes unreachable Choices: false ← (default) true
force_order boolean	Enable next-hop ordering as specified in the address parameter. Choices: false ← (default) true
load_share boolean	Enable traffic load balancing across a maximum of 32 next-hop addresses Choices: false ← (default) true
peer_address boolean	BGP prefix next hop is set to the local address of the peer. If no next hop is set in the route map, the next hop is set to the one stored in the path. Choices: false true
redist_unchanged boolean	Set for next-hop address conservation for non-local generated routes. Used with redistribute command. Available to maintain BGP routing compliant with RFC 4271 on Nexus OS. Choices: false true
unchanged boolean	Set for next-hop address conservation in eBGP outgoing updates Choices: false true
verify_availability list / elements=dictionary	Set next-hop ip address tracking with IP SLA
address string / required	Set one next-hop address
drop_on_fail boolean	Drop packets instead of using default routing when the configured next hop becomes unreachable Choices: false ← (default) true
force_order boolean	Enable next-hop ordering as specified in the address parameter. Choices: false ← (default) true
load_share boolean	Enable traffic load balancing across a maximum of 32 next-hop addresses Choices: false ← (default) true
track integer / required	Set track number
precedence string	Set precedence field.
ipv6 dictionary	Configure IPv6 features.
address dictionary	Specify IP address.
prefix_list string	Name of prefix list (Max Size 63).
precedence string	Set precedence field.
label_index integer	Set Segment Routing (SR) label index of route.
level string	Where to import route. Choices: "level-1" "level-1-2" "level-2"
local_preference integer	BGP local preference path attribute.
metric dictionary	Set metric for destination routing protocol.
bandwidth integer	Metric value or Bandwidth in Kbits per second (Max Size 11).
igrp_delay_metric integer	IGRP delay metric.
igrp_effective_bandwidth_metric integer	IGRP Effective bandwidth metric (Loading) 255 is 100%.
igrp_mtu integer	IGRP MTU of the path.
igrp_reliability_metric integer	IGRP reliability metric where 255 is 100 percent reliable.
metric_type string	Type of metric for destination routing protocol. Choices: "external" "internal" "type-1" "type-2"
nssa_only boolean	OSPF NSSA Areas. Choices: false true
null_interface string	Output Null interface.
origin string	BGP origin code. Choices: "egp" "igp" "incomplete"
path_selection string	Path selection criteria for BGP. Choices: "all" "backup" "best2" "multipaths"
tag integer	Tag value for destination routing protocol.
weight integer	BGP weight for routing table.
route_map string	Route-map name.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config | section ‘^route-map’. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. With state replaced, for the listed route-maps, sequences that are in running-config but not in the task are negated. With state overridden, all route-maps that are in running-config but not in the task are negated. Please refer to examples for more details. Choices: "merged" ← (default) "replaced" "overridden" "deleted" "parsed" "gathered" "rendered"

Notes

Note

• Tested against NX-OS 9.3.6.

• Unsupported for Cisco MDS

• This module works with connection network_cli and httpapi.

Examples

# Using merged

# Before state:
# -------------
# nxos-9k-rdo# show running-config | section "^route-map"
# nxos-9k-rdo#

- name: Merge the provided configuration with the existing running configuration
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
        entries:
          - sequence: 10
            action: permit
            description: rmap1-10-permit
            match:
              ip:
                address:
                  access_list: acl_1
              as_path: Allow40
              as_number:
                asn: 65564

          - sequence: 20
            action: deny
            description: rmap1-20-deny
            match:
              community:
                community_list:
                  - BGPCommunity1
                  - BGPCommunity2
              ip:
                address:
                  prefix_lists:
                    - AllowPrefix1
                    - AllowPrefix2
            set:
              dampening:
                half_life: 30
                start_reuse_route: 1500
                start_suppress_route: 10000
                max_suppress_time: 120

      - route_map: rmap2
        entries:
          - sequence: 20
            action: permit
            description: rmap2-20-permit
            continue_sequence: 40
            match:
              ipv6:
                address:
                  prefix_lists: AllowIPv6Prefix
              interfaces: "{{ nxos_int1 }}"
            set:
              as_path:
                prepend:
                  as_number:
                    - 65563
                    - 65568
                    - 65569
              comm_list: BGPCommunity

          - sequence: 40
            action: deny
            description: rmap2-40-deny
            match:
              route_types:
                - level-1
                - level-2
              tags: 2
              ip:
                multicast:
                  rp:
                    prefix: 192.0.2.0/24
                    rp_type: ASM
                  source: 203.0.113.0/24
                  group_range:
                    first: 239.0.0.1
                    last: 239.255.255.255

      - route_map: rmap3
        entries:
          - sequence: 10
            description: "*** first stanza ***"
            action: permit
            set:
              ip:
                next_hop:
                  verify_availability:
                    - address: 3.3.3.3
                      track: 1
                    - address: 4.4.4.4
                      track: 3

          - sequence: 20
            description: "*** second stanza ***"
            action: permit
            set:
              ip:
                next_hop:
                  address: 6.6.6.6 2.2.2.2
                  load_share: true
                  drop_on_fail: true

          - sequence: 30
            description: "*** third stanza ***"
            action: permit
            set:
              ip:
                next_hop:
                  peer_address: true

          - sequence: 40
            description: "*** fourth stanza ***"
            action: permit
            set:
              ip:
                next_hop:
                  unchanged: true
                  redist_unchanged: true
    state: merged

# Task output
# -------------
#  before: []
#
#  commands:
#    - "route-map rmap1 permit 10"
#    - "match as-number 65564"
#    - "match as-path Allow40"
#    - "match ip address acl_1"
#    - "description rmap1-10-permit"
#    - "route-map rmap1 deny 20"
#    - "match community BGPCommunity1 BGPCommunity2"
#    - "match ip address prefix-list AllowPrefix1 AllowPrefix2"
#    - "description rmap1-20-deny"
#    - "set dampening 30 1500 10000 120"
#    - "route-map rmap2 permit 20"
#    - "match interface Ethernet1/1"
#    - "match ipv6 address prefix-list AllowIPv6Prefix"
#    - "set as-path prepend 65563 65568 65569"
#    - "description rmap2-20-permit"
#    - "continue 40"
#    - "set comm-list BGPCommunity delete"
#    - "route-map rmap2 deny 40"
#    - "match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM"
#    - "match route-type level-1 level-2"
#    - "match tag 2"
#    - "description rmap2-40-deny"
#    - "route-map rmap3 permit 10"
#    - "description *** first stanza ***"
#    - "set ip next-hop verify-availability 3.3.3.3 track 1"
#    - "set ip next-hop verify-availability 4.4.4.4 track 3"
#    - "route-map rmap3 permit 20"
#    - "description *** second stanza ***"
#    - "set ip next-hop 6.6.6.6 2.2.2.2 load-share  drop-on-fail"
#    - "route-map rmap3 permit 30"
#    - "description *** third stanza ***"
#    - "set ip next-hop peer-address"
#    - "route-map rmap3 permit 40"
#    - "description *** fourth stanza ***"
#    - "set ip next-hop unchanged"
#    - "set ip next-hop redist-unchanged"
#
#  after:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
#   - route_map: rmap3
#     entries:
#     - sequence: 10
#       description: "*** first stanza ***"
#       action: permit
#       set:
#         ip:
#           next_hop:
#             verify_availability:
#             - address: 3.3.3.3
#               track: 1
#             - address: 4.4.4.4
#               track: 3
#
#     - sequence: 20
#       description: "*** second stanza ***"
#       action: permit
#       set:
#         ip:
#           next_hop:
#             address: 6.6.6.6 2.2.2.2
#             load_share: true
#             drop_on_fail: true
#
#     - sequence: 30
#       description: "*** third stanza ***"
#       action: permit
#       set:
#         ip:
#           next_hop:
#             peer_address: true
#
#     - sequence: 40
#       description: "*** fourth stanza ***"
#       action: permit
#       set:
#         ip:
#           next_hop:
#             unchanged: true
#             redist_unchanged: true

# After state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny
# route-map rmap3 permit 10
#   description *** first stanza ***
#   set ip next-hop verify-availability 3.3.3.3 track 1
#   set ip next-hop verify-availability 4.4.4.4 track 3
# route-map rmap3 permit 20
#   description *** second stanza ***
#   set ip next-hop 6.6.6.6 2.2.2.2 load-share  drop-on-fail
# route-map rmap3 permit 30
#   description *** third stanza ***
#   set ip next-hop peer-address
# route-map rmap3 permit 40
#   description *** fourth stanza ***
#   set ip next-hop unchanged
#   set ip next-hop redist-unchanged
#
# Using replaced
# (for the listed route-map(s), sequences that are in running-config but not in the task are negated)

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny
# route-map rmap3 permit 10
#   description *** first stanza ***
#   set ip next-hop verify-availability 3.3.3.3 track 1
#   set ip next-hop verify-availability 4.4.4.4 track 3
# route-map rmap3 permit 20
#   description *** second stanza ***
#   set ip next-hop 6.6.6.6 2.2.2.2 load-share  drop-on-fail
# route-map rmap3 permit 30
#   description *** third stanza ***
#   set ip next-hop peer-address
# route-map rmap3 permit 40
#   description *** fourth stanza ***
#   set ip next-hop unchanged
#   set ip next-hop redist-unchanged
#
- name: Replace route-maps configurations of listed route-maps with provided configurations
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
        entries:
          - sequence: 20
            action: deny
            description: rmap1-20-deny
            match:
              community:
                community_list:
                  - BGPCommunity4
                  - BGPCommunity5
              ip:
                address:
                  prefix_lists:
                    - AllowPrefix1
            set:
              community:
                local_as: true

      - route_map: rmap3
        entries:
          - sequence: 10
            description: "*** first stanza ***"
            action: permit
            set:
              ip:
                next_hop:
                  verify_availability:
                    - address: 3.3.3.3
                      track: 1
          - sequence: 20
            description: "*** second stanza ***"
            action: permit
            set:
              ip:
                next_hop:
                  peer_address: true
          - sequence: 30
            description: "*** third stanza ***"
            action: permit
            set:
              ip:
                next_hop:
                  address: 6.6.6.6 2.2.2.2
                  load_share: true
                  drop_on_fail: true
    state: replaced

# Task output
# -------------
#  before:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
#   - route_map: rmap3
#     entries:
#     - sequence: 10
#       description: "*** first stanza ***"
#       action: permit
#       set:
#         ip:
#           next_hop:
#             verify_availability:
#             - address: 3.3.3.3
#               track: 1
#             - address: 4.4.4.4
#               track: 3
#
#     - sequence: 20
#       description: "*** second stanza ***"
#       action: permit
#       set:
#         ip:
#           next_hop:
#             address: 6.6.6.6 2.2.2.2
#             load_share: true
#             drop_on_fail: true
#
#     - sequence: 30
#       description: "*** third stanza ***"
#       action: permit
#       set:
#         ip:
#           next_hop:
#             peer_address: true
#
#     - sequence: 40
#       description: "*** fourth stanza ***"
#       action: permit
#       set:
#         ip:
#           next_hop:
#             unchanged: true
#             redist_unchanged: true
#
#  commands:
#    - no route-map rmap1 permit 10
#    - route-map rmap1 deny 20
#    - no match community BGPCommunity1 BGPCommunity2
#    - match community BGPCommunity4 BGPCommunity5
#    - no match ip address prefix-list AllowPrefix1 AllowPrefix2
#    - match ip address prefix-list AllowPrefix1
#    - no set dampening 30 1500 10000 120
#    - set community local-AS
#    - route-map rmap3 permit 10
#    - no set ip next-hop verify-availability 4.4.4.4 track 3
#    - route-map rmap3 permit 20
#    - no set ip next-hop 6.6.6.6 2.2.2.2 load-share drop-on-fail
#    - set ip next-hop peer-address
#    - route-map rmap3 permit 30
#    - no set ip next-hop peer-address
#    - set ip next-hop 6.6.6.6 2.2.2.2 load-share drop-on-fail
#    - no route-map rmap3 permit 40
#
#  after:
#    - route_map: rmap1
#      entries:
#        - sequence: 20
#          action: deny
#          description: rmap1-20-deny
#          match:
#            community:
#              community_list:
#                - BGPCommunity4
#                - BGPCommunity5
#            ip:
#              address:
#                prefix_lists:
#                  - AllowPrefix1
#          set:
#            community:
#              local_as: true
#
#    - route_map: rmap2
#      entries:
#        - action: permit
#          continue_sequence: 40
#          description: rmap2-20-permit
#          match:
#            interfaces:
#            - Ethernet1/1
#            ipv6:
#              address:
#                prefix_lists:
#                - AllowIPv6Prefix
#          sequence: 20
#          set:
#            as_path:
#              prepend:
#                as_number:
#                - '65563'
#                - '65568'
#                - '65569'
#            comm_list: BGPCommunity
#
#        - action: deny
#          description: rmap2-40-deny
#          match:
#            ip:
#              multicast:
#                group_range:
#                  first: 239.0.0.1
#                  last: 239.255.255.255
#                rp:
#                  prefix: 192.0.2.0/24
#                  rp_type: ASM
#                source: 203.0.113.0/24
#            route_types:
#            - level-1
#            - level-2
#            tags:
#            - 2
#          sequence: 40
#
#    - route_map: rmap3
#      entries:
#      - sequence: 10
#        description: "*** first stanza ***"
#        action: permit
#        set:
#          ip:
#            next_hop:
#              verify_availability:
#              - address: 3.3.3.3
#                track: 1
#      - sequence: 20
#        description: "*** second stanza ***"
#        action: permit
#        set:
#          ip:
#            next_hop:
#              peer_address: true
#      - sequence: 30
#        description: "*** third stanza ***"
#        action: permit
#        set:
#          ip:
#            next_hop:
#              address: 6.6.6.6 2.2.2.2
#              load_share: true
#              drop_on_fail: true

# After state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 deny 20
#   description rmap1-20-deny
#   match community BGPCommunity4 BGPCommunity5
#   match ip address prefix-list AllowPrefix1
#   set community local-AS
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny
# route-map rmap3 permit 10
#   description *** first stanza ***
#   set ip next-hop verify-availability 3.3.3.3 track 1
# route-map rmap3 permit 20
#   description *** second stanza ***
#   set ip next-hop peer-address
# route-map rmap3 permit 30
#   description *** third stanza ***
#   set ip next-hop 6.6.6.6 2.2.2.2 load-share  drop-on-fail

# Using overridden

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

- name: Override all route-maps configuration with provided configuration
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
        entries:
          - sequence: 20
            action: deny
            description: rmap1-20-deny
            match:
              community:
                community_list:
                  - BGPCommunity4
                  - BGPCommunity5
              ip:
                address:
                  prefix_lists:
                    - AllowPrefix1
            set:
              community:
                local_as: true
    state: overridden

# Task output
# -------------
#  before:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
#  commands:
#    - no route-map rmap1 permit 10
#    - route-map rmap1 deny 20
#    - no match community BGPCommunity1 BGPCommunity2
#    - match community BGPCommunity4 BGPCommunity5
#    - no match ip address prefix-list AllowPrefix1 AllowPrefix2
#    - match ip address prefix-list AllowPrefix1
#    - no set dampening 30 1500 10000 120
#    - set community local-AS
#    - no route-map rmap2 permit 20
#    - no route-map rmap2 deny 40
#
#  after:
#  - route_map: rmap1
#    entries:
#    - sequence: 20
#      action: deny
#      description: rmap1-20-deny
#      match:
#        community:
#          community_list:
#          - BGPCommunity4
#          - BGPCommunity5
#        ip:
#          address:
#            prefix_lists:
#            - AllowPrefix1
#      set:
#        community:
#          local_as: true
#
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^route-map"
# route-map rmap1 deny 20
#   description rmap1-20-deny
#   match community BGPCommunity4 BGPCommunity5
#   match ip address prefix-list AllowPrefix1
#   set community local-AS

# Using deleted to delete a single route-map

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

- name: Delete single route-map
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
    state: deleted

# Task output
# -------------
#  before:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
#  commands:
#    - no route-map rmap1 permit 10
#    - no route-map rmap1 deny 20
#
#  after:
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^route-map"
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

# Using deleted to delete all route-maps from the device running-config

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

- name: Delete all route-maps
  cisco.nxos.nxos_route_maps:
    state: deleted

# Task output
# -------------
#  before:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
#  commands:
#    - no route-map rmap1 permit 10
#    - no route-map rmap1 deny 20
#    - no route-map rmap2 permit 20
#    - no route-map rmap2 deny 40
#
#  after: []
#
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^route-map"

- name: Render platform specific configuration lines with state rendered (without connecting to the device)
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
        entries:
          - sequence: 10
            action: permit
            description: rmap1-10-permit
            match:
              ip:
                address:
                  access_list: acl_1
              as_path: Allow40
              as_number:
                asn: 65564

          - sequence: 20
            action: deny
            description: rmap1-20-deny
            match:
              community:
                community_list:
                  - BGPCommunity1
                  - BGPCommunity2
              ip:
                address:
                  prefix_lists:
                    - AllowPrefix1
                    - AllowPrefix2
            set:
              dampening:
                half_life: 30
                start_reuse_route: 1500
                start_suppress_route: 10000
                max_suppress_time: 120

      - route_map: rmap2
        entries:
          - sequence: 20
            action: permit
            description: rmap2-20-permit
            continue_sequence: 40
            match:
              ipv6:
                address:
                  prefix_lists: AllowIPv6Prefix
              interfaces: "{{ nxos_int1 }}"
            set:
              as_path:
                prepend:
                  as_number:
                    - 65563
                    - 65568
                    - 65569
              comm_list: BGPCommunity

          - sequence: 40
            action: deny
            description: rmap2-40-deny
            match:
              route_types:
                - level-1
                - level-2
              tags: 2
              ip:
                multicast:
                  rp:
                    prefix: 192.0.2.0/24
                    rp_type: ASM
                  source: 203.0.113.0/24
                  group_range:
                    first: 239.0.0.1
                    last: 239.255.255.255
    state: rendered

# Task Output (redacted)
# -----------------------
#  rendered:
#    - "route-map rmap1 permit 10"
#    - "match as-number 65564"
#    - "match as-path Allow40"
#    - "match ip address acl_1"
#    - "description rmap1-10-permit"
#    - "route-map rmap1 deny 20"
#    - "match community BGPCommunity1 BGPCommunity2"
#    - "match ip address prefix-list AllowPrefix1 AllowPrefix2"
#    - "description rmap1-20-deny"
#    - "set dampening 30 1500 10000 120"
#    - "route-map rmap2 permit 20"
#    - "match interface Ethernet1/1"
#    - "match ipv6 address prefix-list AllowIPv6Prefix"
#    - "set as-path prepend 65563 65568 65569"
#    - "description rmap2-20-permit"
#    - "continue 40"
#    - "set comm-list BGPCommunity delete"
#    - "route-map rmap2 deny 40"
#    - "match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM"
#    - "match route-type level-1 level-2"
#    - "match tag 2"
#    - "description rmap2-40-deny"

# Using parsed

# parsed.cfg
# ------------
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

- name: Parse externally provided route-maps configuration
  cisco.nxos.nxos_route_maps:
    running_config: "{{ lookup('file', './fixtures/parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------
#  parsed:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40

# Using gathered

# Existing route-map config
# ---------------------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete

- name: Gather route-maps facts using gathered
  cisco.nxos.nxos_route_maps:
    state: gathered

#  gathered:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"
before dictionary	The configuration prior to the model invocation. Returned: always Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: ["route-map rmap1 permit 10", "match as-number 65564", "match as-path Allow40", "match ip address acl_1", "description rmap1-10-permit", "route-map rmap1 deny 20", "match community BGPCommunity1 BGPCommunity2"]

Authors

• Nilashish Chakraborty (@NilashishC)

Collection links

• Issue Tracker
• Repository (Sources)