community.network.ce_snmp_target_host module – Manages SNMP target host configuration on HUAWEI CloudEngine switches.
Note
This module is part of the community.network collection (version 5.0.3).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install community.network
.
To use it in a playbook, specify: community.network.ce_snmp_target_host
.
Synopsis
Manages SNMP target host configurations on HUAWEI CloudEngine switches.
Aliases: network.cloudengine.ce_snmp_target_host
Parameters
Parameter |
Comments |
---|---|
Network Address. |
|
Udp port used by SNMP agent to connect the Network management. |
|
Unique name to identify target host entry. |
|
Name of the interface to send the trap message. |
|
To enable or disable Public Net-manager for target Host. Choices:
|
|
To configure notify type as trap or inform. Choices:
|
|
UDP Port number used by network management to receive alarm messages. |
|
Security level indicating whether to use authentication and encryption. Choices:
|
|
Security Model. Choices:
|
|
Security Name. |
|
Security Name V3. |
|
Version(s) Supported by SNMP Engine. Choices:
|
|
VPN instance Name. |
Notes
Note
This module requires the netconf system service be enabled on the remote device being managed.
Recommended connection is
netconf
.This module also works with
local
connections for legacy playbooks.
Examples
- name: CloudEngine snmp target host test
hosts: cloudengine
connection: local
gather_facts: false
tasks:
- name: "Config SNMP version"
community.network.ce_snmp_target_host:
state: present
version: v2cv3
- name: "Config SNMP target host"
community.network.ce_snmp_target_host:
state: present
host_name: test1
address: 1.1.1.1
notify_type: trap
vpn_name: js
security_model: v2c
security_name: wdz
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
check to see if a change was made on the device Returned: always Sample: |
|
k/v pairs of aaa params after module execution Returned: always Sample: |
|
k/v pairs of existing aaa server Returned: always Sample: |
|
k/v pairs of parameters passed into module Returned: always Sample: |
|
command sent to the device Returned: always Sample: |