community.network.ce_vxlan_arp module – Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices.
Note
This module is part of the community.network collection (version 5.0.3).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install community.network
.
To use it in a playbook, specify: community.network.ce_vxlan_arp
.
Synopsis
Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices.
Aliases: network.cloudengine.ce_vxlan_arp
Parameters
Parameter |
Comments |
---|---|
Enables EVN BGP or BGP EVPN to collect host information. Choices:
|
|
Enables ARP broadcast suppression in a BD. Choices:
|
|
Specifies a BD(bridge domain) ID. The value is an integer ranging from 1 to 16777215. |
|
Enables EVN BGP. Choices:
|
|
Specifies the IP address of an EVN BGP peer. The value is in dotted decimal notation. |
|
Configures the local device as the route reflector (RR) and its peer as the client. Choices:
|
|
Configures the local device as the router reflector (RR) on the EVN network. Choices:
|
|
Specifies the source address of an EVN BGP peer. The value is in dotted decimal notation. |
|
Enables EVN BGP or BGP EVPN to advertise host information. Choices:
|
|
Determines whether the config should be present or not on the device. Choices:
|
|
Full name of VBDIF interface, i.e. Vbdif100. |
Notes
Note
Recommended connection is
network_cli
.This module also works with
local
connections for legacy playbooks.
Examples
- name: Vxlan arp module test
hosts: ce128
connection: local
gather_facts: false
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Configure EVN BGP on Layer 2 and Layer 3 VXLAN gateways to establish EVN BGP peer relationships.
community.network.ce_vxlan_arp:
evn_bgp: enable
evn_source_ip: 6.6.6.6
evn_peer_ip: 7.7.7.7
provider: "{{ cli }}"
- name: Configure a Layer 3 VXLAN gateway as a BGP RR.
community.network.ce_vxlan_arp:
evn_bgp: enable
evn_server: enable
provider: "{{ cli }}"
- name: Enable EVN BGP on a Layer 3 VXLAN gateway to collect host information.
community.network.ce_vxlan_arp:
vbdif_name: Vbdif100
arp_collect_host: enable
provider: "{{ cli }}"
- name: Enable Layer 2 and Layer 3 VXLAN gateways to use EVN BGP to advertise host information.
community.network.ce_vxlan_arp:
host_collect_protocol: bgp
provider: "{{ cli }}"
- name: Enable ARP broadcast suppression on a Layer 2 VXLAN gateway.
community.network.ce_vxlan_arp:
bridge_domain_id: 100
arp_suppress: enable
provider: "{{ cli }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
check to see if a change was made on the device Returned: always Sample: |
|
k/v pairs of configuration after module execution Returned: verbose mode Sample: |
|
k/v pairs of existing configuration Returned: verbose mode Sample: |
|
k/v pairs of parameters passed into module Returned: verbose mode Sample: |
|
commands sent to the device Returned: always Sample: |