Index of all deprecated collections and plugins

Index of all deprecated collections

• cisco.asa will be removed from Ansible 12

• cisco.ise will be removed from Ansible 12

• community.network will be removed from Ansible 12

• ibm.qradar will be removed from Ansible 13

• ibm.spectrum_virtualize will be removed from Ansible 12

• sensu.sensu_go will be removed from Ansible 12

Index of all deprecated callback plugins

• ansible.posix.skippy – Ansible screen output that ignores skipped status (Will be removed from ansible.posix in a major release after 2024-12-05.)

• community.general.yaml – YAML-ized Ansible screen output (Will be removed from community.general 12.0.0.)

Index of all deprecated cliconf plugins

• community.network.aireos – Use aireos cliconf to run command on Cisco WLC platform (Will be removed from community.network 6.0.0.)

• community.network.apconos – Use apconos cliconf to run command on APCON network devices (Will be removed from community.network 6.0.0.)

• community.network.aruba – Use aruba cliconf to run command on Aruba platform (Will be removed from community.network 6.0.0.)

• community.network.ce – Use ce cliconf to run command on HUAWEI CloudEngine platform (Will be removed from community.network 6.0.0.)

• community.network.cnos – Use cnos cliconf to run command on Lenovo CNOS platform (Will be removed from community.network 6.0.0.)

• community.network.edgeos – Use edgeos cliconf to run command on EdgeOS platform (Will be removed from community.network 6.0.0.)

• community.network.edgeswitch – Use edgeswitch cliconf to run command on EdgeSwitch platform (Will be removed from community.network 6.0.0.)

• community.network.enos – Use enos cliconf to run command on Lenovo ENOS platform (Will be removed from community.network 6.0.0.)

• community.network.eric_eccli – Use eccli cliconf to run command on Ericsson ECCLI platform (Will be removed from community.network 6.0.0.)

• community.network.exos – Use exos cliconf to run command on Extreme EXOS platform (Will be removed from community.network 6.0.0.)

• community.network.icx – Use icx cliconf to run command on Ruckus ICX platform (Will be removed from community.network 6.0.0.)

• community.network.ironware – Use ironware cliconf to run command on Extreme Ironware platform (Will be removed from community.network 6.0.0.)

• community.network.netvisor – Use netvisor cliconf to run command on Pluribus netvisor platform (Will be removed from community.network 6.0.0.)

• community.network.nos – Use nos cliconf to run command on Extreme NOS platform (Will be removed from community.network 6.0.0.)

• community.network.slxos – Use slxos cliconf to run command on Extreme SLX-OS platform (Will be removed from community.network 6.0.0.)

• community.network.voss – Use voss cliconf to run command on Extreme VOSS platform (Will be removed from community.network 6.0.0.)

• community.network.weos4 – Use weos4 cliconf to run commands on Westermo platform (Will be removed from community.network 6.0.0.)

Index of all deprecated httpapi plugins

• community.network.exos – Use EXOS REST APIs to communicate with EXOS platform (Will be removed from community.network 6.0.0.)

• community.network.ftd – HttpApi Plugin for Cisco ASA Firepower device (Will be removed from community.network 6.0.0.)

Index of all deprecated inventory plugins

• community.general.stackpath_compute – StackPath Edge Computing inventory source (Will be removed from community.general 11.0.0.)

• community.okd.openshift – OpenShift inventory source (Will be removed from community.okd 5.0.0.)

• community.vmware.vmware_host_inventory – VMware ESXi hostsystem inventory source (Will be removed from community.vmware 7.0.0.)

• community.vmware.vmware_vm_inventory – VMware Guest inventory source (Will be removed from community.vmware 7.0.0.)

• kubernetes.core.k8s – Kubernetes (K8s) inventory source (Will be removed from kubernetes.core 6.0.0.)

Index of all deprecated lookup plugins

• community.general.manifold – get credentials from Manifold.co (Will be removed from community.general 11.0.0.)

• community.network.avi – Look up ``Avi`` objects. (Will be removed from community.network 6.0.0.)

• vmware.vmware_rest.cluster_moid – Look up MoID for vSphere cluster objects using vCenter REST API (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.datacenter_moid – Look up MoID for vSphere datacenter objects using vCenter REST API (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.datastore_moid – Look up MoID for vSphere datastore objects using vCenter REST API (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.folder_moid – Look up MoID for vSphere folder objects using vCenter REST API (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.host_moid – Look up MoID for vSphere host objects using vCenter REST API (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.network_moid – Look up MoID for vSphere network objects using vCenter REST API (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.resource_pool_moid – Look up MoID for vSphere resource pool objects using vCenter REST API (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vm_moid – Look up MoID for vSphere vm objects using vCenter REST API (Will be removed from vmware.vmware_rest 5.0.0.)

Index of all deprecated modules

• ansible.windows.win_domain – Ensures the existence of a Windows domain (Will be removed from ansible.windows 3.0.0.)

• ansible.windows.win_domain_controller – Manage domain controller/member server state for a Windows host (Will be removed from ansible.windows 3.0.0.)

• ansible.windows.win_domain_membership – Manage domain/workgroup membership for a Windows host (Will be removed from ansible.windows 3.0.0.)

• check_point.mgmt.cp_mgmt_add_nat_rule – Create new object. (Will be removed from check_point.mgmt in a major release after 2024-11-01.)

• check_point.mgmt.cp_mgmt_delete_nat_rule – Delete existing object using object name or uid. (Will be removed from check_point.mgmt in a major release after 2024-11-01.)

• check_point.mgmt.cp_mgmt_set_nat_rule – Edit existing object using object name or uid. (Will be removed from check_point.mgmt in a major release after 2024-11-01.)

• check_point.mgmt.cp_mgmt_show_task – Show task progress and details. (Will be removed from check_point.mgmt in a major release after 2024-11-01.)

• check_point.mgmt.cp_mgmt_show_tasks – Retrieve all tasks and show their progress and details. (Will be removed from check_point.mgmt in a major release after 2024-11-01.)

• cisco.meraki.meraki_action_batch – Manage Action Batch jobs within the Meraki Dashboard. (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_admin – Manage administrators in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_alert – Manage alerts in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_config_template – Manage configuration templates in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_device – Manage devices in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_firewalled_services – Edit firewall policies for administrative network services (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_management_interface – Configure Meraki management interfaces (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mr_l3_firewall – Manage MR access point layer 3 firewalls in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mr_l7_firewall – Manage MR access point layer 7 firewalls in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mr_radio – Manage device radio settings for Meraki wireless networks (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mr_rf_profile – Manage RF profiles for Meraki wireless networks (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mr_settings – Manage general settings for Meraki wireless networks (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mr_ssid – Manage wireless SSIDs in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_ms_access_list – Manage access lists for Meraki switches in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_ms_access_policies – Manage Switch Access Policies in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_ms_l3_interface – Manage routed interfaces on MS switches (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_ms_link_aggregation – Manage link aggregations on MS switches (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_ms_ospf – Manage OSPF configuration on MS switches (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_ms_stack – Modify switch stacking configuration in Meraki. (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_ms_stack_l3_interface – Manage routed interfaces on MS switches (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_ms_storm_control – Manage storm control configuration on a switch in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_ms_switchport – Manage switchports on a switch in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_content_filtering – Edit Meraki MX content filtering policies (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_intrusion_prevention – Manage intrustion prevention in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_l2_interface – Configure MX layer 2 interfaces (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_l3_firewall – Manage MX appliance layer 3 firewalls in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_l7_firewall – Manage MX appliance layer 7 firewalls in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_malware – Manage Malware Protection in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_nat – Manage NAT rules in Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_network_vlan_settings – Manage VLAN settings for Meraki Networks (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_site_to_site_firewall – Manage MX appliance firewall rules for site-to-site VPNs (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_site_to_site_vpn – Manage AutoVPN connections in Meraki (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_static_route – Manage static routes in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_third_party_vpn_peers – Manage third party (IPSec) VPN peers for MX devices (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_uplink_bandwidth – Manage uplinks on Meraki MX appliances (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_mx_vlan – Manage VLANs in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_network – Manage networks in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_network_settings – Manage the settings of networks in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_organization – Manage organizations in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_snmp – Manage organizations in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_syslog – Manage syslog server settings in the Meraki cloud. (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_webhook – Manage webhooks configured in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.meraki.meraki_webhook_payload_template – Manage webhook payload templates for a network in the Meraki cloud (Will be removed from cisco.meraki 3.0.0.)

• cisco.mso.mso_schema_site_anp_epg_bulk_staticport – Manage site-local EPG static ports in bulk in schema template (Will be removed from cisco.mso 3.0.0.)

• cisco.mso.mso_schema_template_deploy – Deploy schema templates to sites (Will be removed from cisco.mso 3.0.0.)

• cisco.nxos.nxos_snmp_community – (deprecated, removed after 2024-01-01) Manages SNMP community configs. (Will be removed from cisco.nxos in a major release after 2024-01-01.)

• cisco.nxos.nxos_snmp_contact – (deprecated, removed after 2024-01-01) Manages SNMP contact info. (Will be removed from cisco.nxos in a major release after 2024-01-01.)

• cisco.nxos.nxos_snmp_host – (deprecated, removed after 2024-01-01) Manages SNMP host configuration. (Will be removed from cisco.nxos in a major release after 2024-01-01.)

• cisco.nxos.nxos_snmp_location – (deprecated, removed after 2024-01-01) Manages SNMP location information. (Will be removed from cisco.nxos in a major release after 2024-01-01.)

• cisco.nxos.nxos_snmp_traps – (deprecated, removed after 2024-01-01) Manages SNMP traps. (Will be removed from cisco.nxos in a major release after 2024-01-01.)

• cisco.nxos.nxos_snmp_user – (deprecated, removed after 2024-01-01) Manages SNMP users for monitoring. (Will be removed from cisco.nxos in a major release after 2024-01-01.)

• community.digitalocean.digital_ocean – Create/delete a droplet/SSH_key in DigitalOcean (Will be removed from community.digitalocean 2.0.0.)

• community.general.atomic_container – Manage the containers on the atomic host platform (Will be removed from community.general 13.0.0.)

• community.general.atomic_host – Manage the atomic host platform (Will be removed from community.general 13.0.0.)

• community.general.atomic_image – Manage the container images on the atomic host platform (Will be removed from community.general 13.0.0.)

• community.general.clc_alert_policy – Create or Delete Alert Policies at CenturyLink Cloud (Will be removed from community.general 11.0.0.)

• community.general.clc_blueprint_package – Deploys a blue print package on a set of servers in CenturyLink Cloud (Will be removed from community.general 11.0.0.)

• community.general.clc_firewall_policy – Create/delete/update firewall policies (Will be removed from community.general 11.0.0.)

• community.general.clc_group – Create/delete Server Groups at Centurylink Cloud (Will be removed from community.general 11.0.0.)

• community.general.clc_loadbalancer – Create, Delete shared loadbalancers in CenturyLink Cloud (Will be removed from community.general 11.0.0.)

• community.general.clc_modify_server – Modify servers in CenturyLink Cloud (Will be removed from community.general 11.0.0.)

• community.general.clc_publicip – Add and Delete public IPs on servers in CenturyLink Cloud (Will be removed from community.general 11.0.0.)

• community.general.clc_server – Create, Delete, Start and Stop servers in CenturyLink Cloud (Will be removed from community.general 11.0.0.)

• community.general.clc_server_snapshot – Create, Delete and Restore server snapshots in CenturyLink Cloud (Will be removed from community.general 11.0.0.)

• community.general.facter – Runs the discovery program facter on the remote system (Will be removed from community.general 12.0.0.)

• community.general.hipchat – Send a message to Hipchat (Will be removed from community.general 11.0.0.)

• community.general.profitbricks – Create, destroy, start, stop, and reboot a ProfitBricks virtual machine (Will be removed from community.general 11.0.0.)

• community.general.profitbricks_datacenter – Create or destroy a ProfitBricks Virtual Datacenter (Will be removed from community.general 11.0.0.)

• community.general.profitbricks_nic – Create or Remove a NIC (Will be removed from community.general 11.0.0.)

• community.general.profitbricks_volume – Create or destroy a volume (Will be removed from community.general 11.0.0.)

• community.general.profitbricks_volume_attachments – Attach or detach a volume (Will be removed from community.general 11.0.0.)

• community.general.sensu_check – Manage Sensu checks (Will be removed from community.general 13.0.0.)

• community.general.sensu_client – Manages Sensu client configuration (Will be removed from community.general 13.0.0.)

• community.general.sensu_handler – Manages Sensu handler configuration (Will be removed from community.general 13.0.0.)

• community.general.sensu_silence – Manage Sensu silence entries (Will be removed from community.general 13.0.0.)

• community.general.sensu_subscription – Manage Sensu subscriptions (Will be removed from community.general 13.0.0.)

• community.grafana.grafana_notification_channel – Manage Grafana Notification Channels (Will be removed from community.grafana 3.0.0.)

• community.network.a10_server – Manage A10 Networks AX/SoftAX/Thunder/vThunder devices’ server object. (Will be removed from community.network 6.0.0.)

• community.network.a10_server_axapi3 – Manage A10 Networks AX/SoftAX/Thunder/vThunder devices (Will be removed from community.network 6.0.0.)

• community.network.a10_service_group – Manage A10 Networks AX/SoftAX/Thunder/vThunder devices’ service groups. (Will be removed from community.network 6.0.0.)

• community.network.a10_virtual_server – Manage A10 Networks AX/SoftAX/Thunder/vThunder devices’ virtual servers. (Will be removed from community.network 6.0.0.)

• community.network.aireos_command – Run commands on remote devices running Cisco WLC (Will be removed from community.network 6.0.0.)

• community.network.aireos_config – Manage Cisco WLC configurations (Will be removed from community.network 6.0.0.)

• community.network.apconos_command – Run arbitrary commands on APCON devices (Will be removed from community.network 6.0.0.)

• community.network.aruba_command – Run commands on remote devices running Aruba Mobility Controller (Will be removed from community.network 6.0.0.)

• community.network.aruba_config – Manage Aruba configuration sections (Will be removed from community.network 6.0.0.)

• community.network.avi_actiongroupconfig – Module for setup of ActionGroupConfig Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_alertconfig – Module for setup of AlertConfig Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_alertemailconfig – Module for setup of AlertEmailConfig Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_alertscriptconfig – Module for setup of AlertScriptConfig Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_alertsyslogconfig – Module for setup of AlertSyslogConfig Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_analyticsprofile – Module for setup of AnalyticsProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_api_session – Avi API Module (Will be removed from community.network 6.0.0.)

• community.network.avi_api_version – Avi API Version Module (Will be removed from community.network 6.0.0.)

• community.network.avi_applicationpersistenceprofile – Module for setup of ApplicationPersistenceProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_applicationprofile – Module for setup of ApplicationProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_authprofile – Module for setup of AuthProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_autoscalelaunchconfig – Module for setup of AutoScaleLaunchConfig Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_backup – Module for setup of Backup Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_backupconfiguration – Module for setup of BackupConfiguration Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_certificatemanagementprofile – Module for setup of CertificateManagementProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_cloud – Module for setup of Cloud Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_cloudconnectoruser – Module for setup of CloudConnectorUser Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_cloudproperties – Module for setup of CloudProperties Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_cluster – Module for setup of Cluster Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_clusterclouddetails – Module for setup of ClusterCloudDetails Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_controllerproperties – Module for setup of ControllerProperties Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_customipamdnsprofile – Module for setup of CustomIpamDnsProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_dnspolicy – Module for setup of DnsPolicy Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_errorpagebody – Module for setup of ErrorPageBody Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_errorpageprofile – Module for setup of ErrorPageProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_gslb – Module for setup of Gslb Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_gslbgeodbprofile – Module for setup of GslbGeoDbProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_gslbservice – Module for setup of GslbService Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_gslbservice_patch_member – Avi API Module (Will be removed from community.network 6.0.0.)

• community.network.avi_hardwaresecuritymodulegroup – Module for setup of HardwareSecurityModuleGroup Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_healthmonitor – Module for setup of HealthMonitor Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_httppolicyset – Module for setup of HTTPPolicySet Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_ipaddrgroup – Module for setup of IpAddrGroup Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_ipamdnsproviderprofile – Module for setup of IpamDnsProviderProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_l4policyset – Module for setup of L4PolicySet Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_microservicegroup – Module for setup of MicroServiceGroup Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_network – Module for setup of Network Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_networkprofile – Module for setup of NetworkProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_networksecuritypolicy – Module for setup of NetworkSecurityPolicy Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_pkiprofile – Module for setup of PKIProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_pool – Module for setup of Pool Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_poolgroup – Module for setup of PoolGroup Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_poolgroupdeploymentpolicy – Module for setup of PoolGroupDeploymentPolicy Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_prioritylabels – Module for setup of PriorityLabels Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_role – Module for setup of Role Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_scheduler – Module for setup of Scheduler Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_seproperties – Module for setup of SeProperties Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_serverautoscalepolicy – Module for setup of ServerAutoScalePolicy Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_serviceengine – Module for setup of ServiceEngine Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_serviceenginegroup – Module for setup of ServiceEngineGroup Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_snmptrapprofile – Module for setup of SnmpTrapProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_sslkeyandcertificate – Module for setup of SSLKeyAndCertificate Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_sslprofile – Module for setup of SSLProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_stringgroup – Module for setup of StringGroup Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_systemconfiguration – Module for setup of SystemConfiguration Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_tenant – Module for setup of Tenant Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_trafficcloneprofile – Module for setup of TrafficCloneProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_user – Avi User Module (Will be removed from community.network 6.0.0.)

• community.network.avi_useraccount – Avi UserAccount Module (Will be removed from community.network 6.0.0.)

• community.network.avi_useraccountprofile – Module for setup of UserAccountProfile Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_virtualservice – Module for setup of VirtualService Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_vrfcontext – Module for setup of VrfContext Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_vsdatascriptset – Module for setup of VSDataScriptSet Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_vsvip – Module for setup of VsVip Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.avi_webhook – Module for setup of Webhook Avi RESTful Object (Will be removed from community.network 6.0.0.)

• community.network.bcf_switch – Create and remove a bcf switch. (Will be removed from community.network 6.0.0.)

• community.network.bigmon_chain – Create and remove a bigmon inline service chain. (Will be removed from community.network 6.0.0.)

• community.network.bigmon_policy – Create and remove a bigmon out-of-band policy. (Will be removed from community.network 6.0.0.)

• community.network.ce_aaa_server – Manages AAA server global configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_aaa_server_host – Manages AAA server host configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_acl – Manages base ACL configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_acl_advance – Manages advanced ACL configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_acl_interface – Manages applying ACLs to interfaces on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_bfd_global – Manages BFD global configuration on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_bfd_session – Manages BFD session configuration on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_bfd_view – Manages BFD session view configuration on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_bgp – Manages BGP configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_bgp_af – Manages BGP Address-family configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_bgp_neighbor – Manages BGP peer configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_bgp_neighbor_af – Manages BGP neighbor Address-family configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_command – Run arbitrary command on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_config – Manage Huawei CloudEngine configuration sections. (Will be removed from community.network 6.0.0.)

• community.network.ce_dldp – Manages global DLDP configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_dldp_interface – Manages interface DLDP configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_eth_trunk – Manages Eth-Trunk interfaces on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_evpn_bd_vni – Manages EVPN VXLAN Network Identifier (VNI) on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_evpn_bgp – Manages BGP EVPN configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_evpn_bgp_rr – Manages RR for the VXLAN Network on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_evpn_global – Manages global configuration of EVPN on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_facts – Gets facts about HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_file_copy – Copy a file to a remote cloudengine device over SCP on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_info_center_debug – Manages information center debug configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_info_center_global – Manages outputting logs on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_info_center_log – Manages information center log configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_info_center_trap – Manages information center trap configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_interface – Manages physical attributes of interfaces on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_interface_ospf – Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_ip_interface – Manages L3 attributes for IPv4 and IPv6 interfaces on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_is_is_instance – Manages isis process id configuration on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_is_is_interface – Manages isis interface configuration on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_is_is_view – Manages isis view configuration on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_lacp – Manages Eth-Trunk interfaces on HUAWEI CloudEngine switches (Will be removed from community.network 6.0.0.)

• community.network.ce_link_status – Get interface link status on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_lldp – Manages LLDP configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_lldp_interface – Manages INTERFACE LLDP configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_mdn_interface – Manages MDN configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_mlag_config – Manages MLAG configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_mlag_interface – Manages MLAG interfaces on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_mtu – Manages MTU settings on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_multicast_global – Manages multicast global configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_multicast_igmp_enable – Manages multicast igmp enable configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_netconf – Run an arbitrary netconf command on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_netstream_aging – Manages timeout mode of NetStream on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_netstream_export – Manages netstream export on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_netstream_global – Manages global parameters of NetStream on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_netstream_template – Manages NetStream template configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_ntp – Manages core NTP configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_ntp_auth – Manages NTP authentication configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_ospf – Manages configuration of an OSPF instance on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_ospf_vrf – Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_reboot – Reboot a HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_rollback – Set a checkpoint or rollback to a checkpoint on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_sflow – Manages sFlow configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_snmp_community – Manages SNMP community configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_snmp_contact – Manages SNMP contact configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_snmp_location – Manages SNMP location configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_snmp_target_host – Manages SNMP target host configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_snmp_traps – Manages SNMP traps configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_snmp_user – Manages SNMP user configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_startup – Manages a system startup information on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_static_route – Manages static route configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_static_route_bfd – Manages static route configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_stp – Manages STP configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_switchport – Manages Layer 2 switchport interfaces on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_vlan – Manages VLAN resources and attributes on Huawei CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_vrf – Manages VPN instance on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_vrf_af – Manages VPN instance address family on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_vrf_interface – Manages interface specific VPN configuration on HUAWEI CloudEngine switches. (Will be removed from community.network 6.0.0.)

• community.network.ce_vrrp – Manages VRRP interfaces on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_vxlan_arp – Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_vxlan_gateway – Manages gateway for the VXLAN network on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_vxlan_global – Manages global attributes of VXLAN and bridge domain on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_vxlan_tunnel – Manages VXLAN tunnel configuration on HUAWEI CloudEngine devices. (Will be removed from community.network 6.0.0.)

• community.network.ce_vxlan_vap – Manages VXLAN virtual access point on HUAWEI CloudEngine Devices. (Will be removed from community.network 6.0.0.)

• community.network.cnos_backup – Backup the current running or startup configuration to a remote server on devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_banner – Manage multiline banners on Lenovo CNOS devices (Will be removed from community.network 6.0.0.)

• community.network.cnos_bgp – Manage BGP resources and attributes on devices running CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_command – Run arbitrary commands on Lenovo CNOS devices (Will be removed from community.network 6.0.0.)

• community.network.cnos_conditional_command – Execute a single command based on condition on devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_conditional_template – Manage switch configuration using templates based on condition on devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_config – Manage Lenovo CNOS configuration sections (Will be removed from community.network 6.0.0.)

• community.network.cnos_factory – Reset the switch startup configuration to default (factory) on devices running Lenovo CNOS. (Will be removed from community.network 6.0.0.)

• community.network.cnos_facts – Collect facts from remote devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_image – Perform firmware upgrade/download from a remote server on devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_interface – Manage Interface on Lenovo CNOS network devices (Will be removed from community.network 6.0.0.)

• community.network.cnos_l2_interface – Manage Layer-2 interface on Lenovo CNOS devices. (Will be removed from community.network 6.0.0.)

• community.network.cnos_l3_interface – Manage Layer-3 interfaces on Lenovo CNOS network devices. (Will be removed from community.network 6.0.0.)

• community.network.cnos_linkagg – Manage link aggregation groups on Lenovo CNOS devices (Will be removed from community.network 6.0.0.)

• community.network.cnos_lldp – Manage LLDP configuration on Lenovo CNOS network devices. (Will be removed from community.network 6.0.0.)

• community.network.cnos_logging – Manage logging on network devices (Will be removed from community.network 6.0.0.)

• community.network.cnos_reload – Perform switch restart on devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_rollback – Roll back the running or startup configuration from a remote server on devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_save – Save the running configuration as the startup configuration on devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_showrun – Collect the current running configuration on devices running on CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_static_route – Manage static IP routes on Lenovo CNOS network devices (Will be removed from community.network 6.0.0.)

• community.network.cnos_system – Manage the system attributes on Lenovo CNOS devices (Will be removed from community.network 6.0.0.)

• community.network.cnos_template – Manage switch configuration using templates on devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_user – Manage the collection of local users on Lenovo CNOS devices (Will be removed from community.network 6.0.0.)

• community.network.cnos_vlag – Manage VLAG resources and attributes on devices running Lenovo CNOS (Will be removed from community.network 6.0.0.)

• community.network.cnos_vlan – Manage VLANs on CNOS network devices (Will be removed from community.network 6.0.0.)

• community.network.cnos_vrf – Manage VRFs on Lenovo CNOS network devices (Will be removed from community.network 6.0.0.)

• community.network.cv_server_provision – Provision server port by applying or removing template configuration to an Arista CloudVision Portal configlet that is applied to a switch. (Will be removed from community.network 6.0.0.)

• community.network.dladm_etherstub – Manage etherstubs on Solaris/illumos systems. (Will be removed from community.network 6.0.0.)

• community.network.dladm_iptun – Manage IP tunnel interfaces on Solaris/illumos systems. (Will be removed from community.network 6.0.0.)

• community.network.dladm_linkprop – Manage link properties on Solaris/illumos systems. (Will be removed from community.network 6.0.0.)

• community.network.dladm_vlan – Manage VLAN interfaces on Solaris/illumos systems. (Will be removed from community.network 6.0.0.)

• community.network.dladm_vnic – Manage VNICs on Solaris/illumos systems. (Will be removed from community.network 6.0.0.)

• community.network.edgeos_command – Run one or more commands on EdgeOS devices (Will be removed from community.network 6.0.0.)

• community.network.edgeos_config – Manage EdgeOS configuration on remote device (Will be removed from community.network 6.0.0.)

• community.network.edgeos_facts – Collect facts from remote devices running EdgeOS (Will be removed from community.network 6.0.0.)

• community.network.edgeswitch_facts – Collect facts from remote devices running Edgeswitch (Will be removed from community.network 6.0.0.)

• community.network.edgeswitch_vlan – Manage VLANs on Ubiquiti Edgeswitch network devices (Will be removed from community.network 6.0.0.)

• community.network.enos_command – Run arbitrary commands on Lenovo ENOS devices (Will be removed from community.network 6.0.0.)

• community.network.enos_config – Manage Lenovo ENOS configuration sections (Will be removed from community.network 6.0.0.)

• community.network.enos_facts – Collect facts from remote devices running Lenovo ENOS (Will be removed from community.network 6.0.0.)

• community.network.eric_eccli_command – Run commands on remote devices running ERICSSON ECCLI (Will be removed from community.network 6.0.0.)

• community.network.exos_command – Run commands on remote devices running Extreme EXOS (Will be removed from community.network 6.0.0.)

• community.network.exos_config – Manage Extreme Networks EXOS configuration sections (Will be removed from community.network 6.0.0.)

• community.network.exos_facts – Collect facts from devices running Extreme EXOS (Will be removed from community.network 6.0.0.)

• community.network.exos_l2_interfaces – Manage L2 interfaces on Extreme Networks EXOS devices. (Will be removed from community.network 6.0.0.)

• community.network.exos_lldp_global – Configure and manage Link Layer Discovery Protocol(LLDP) attributes on EXOS platforms. (Will be removed from community.network 6.0.0.)

• community.network.exos_lldp_interfaces – Manage link layer discovery protocol (LLDP) attributes of interfaces on EXOS platforms. (Will be removed from community.network 6.0.0.)

• community.network.exos_vlans – Manage VLANs on Extreme Networks EXOS devices. (Will be removed from community.network 6.0.0.)

• community.network.flowadm – Manage bandwidth resource control and priority for protocols, services and zones on Solaris/illumos systems (Will be removed from community.network 6.0.0.)

• community.network.ftd_configuration – Manages configuration on Cisco FTD devices over REST API (Will be removed from community.network 6.0.0.)

• community.network.ftd_file_download – Downloads files from Cisco FTD devices over HTTP(S) (Will be removed from community.network 6.0.0.)

• community.network.ftd_file_upload – Uploads files to Cisco FTD devices over HTTP(S) (Will be removed from community.network 6.0.0.)

• community.network.ftd_install – Installs FTD pkg image on the firewall (Will be removed from community.network 6.0.0.)

• community.network.iap_start_workflow – Start a workflow in the Itential Automation Platform (Will be removed from community.network 6.0.0.)

• community.network.iap_token – Get token for the Itential Automation Platform (Will be removed from community.network 6.0.0.)

• community.network.icx_banner – Manage multiline banners on Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_command – Run arbitrary commands on remote Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_config – Manage configuration sections of Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_copy – Transfer files from or to remote Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_facts – Collect facts from remote Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_interface – Manage Interface on Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_l3_interface – Manage Layer-3 interfaces on Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_linkagg – Manage link aggregation groups on Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_lldp – Manage LLDP configuration on Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_logging – Manage logging on Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_ping – Tests reachability using ping from Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_static_route – Manage static IP routes on Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_system – Manage the system attributes on Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.icx_user – Manage the user accounts on Ruckus ICX 7000 series switches. (Will be removed from community.network 6.0.0.)

• community.network.icx_vlan – Manage VLANs on Ruckus ICX 7000 series switches (Will be removed from community.network 6.0.0.)

• community.network.ig_config – Manage the configuration database on an Ingate SBC. (Will be removed from community.network 6.0.0.)

• community.network.ig_unit_information – Get unit information from an Ingate SBC. (Will be removed from community.network 6.0.0.)

• community.network.ipadm_addr – Manage IP addresses on an interface on Solaris/illumos systems (Will be removed from community.network 6.0.0.)

• community.network.ipadm_addrprop – Manage IP address properties on Solaris/illumos systems. (Will be removed from community.network 6.0.0.)

• community.network.ipadm_if – Manage IP interfaces on Solaris/illumos systems. (Will be removed from community.network 6.0.0.)

• community.network.ipadm_ifprop – Manage IP interface properties on Solaris/illumos systems. (Will be removed from community.network 6.0.0.)

• community.network.ipadm_prop – Manage protocol properties on Solaris/illumos systems. (Will be removed from community.network 6.0.0.)

• community.network.ironware_command – Run arbitrary commands on Extreme IronWare devices (Will be removed from community.network 6.0.0.)

• community.network.ironware_config – Manage configuration sections on Extreme Ironware devices (Will be removed from community.network 6.0.0.)

• community.network.ironware_facts – Collect facts from devices running Extreme Ironware (Will be removed from community.network 6.0.0.)

• community.network.nclu – Configure network interfaces using NCLU (Will be removed from community.network 6.0.0.)

• community.network.netact_cm_command – Manage network configuration data in Nokia Core and Radio networks (Will be removed from community.network 6.0.0.)

• community.network.netscaler_cs_action – Manage content switching actions (Will be removed from community.network 6.0.0.)

• community.network.netscaler_cs_policy – Manage content switching policy (Will be removed from community.network 6.0.0.)

• community.network.netscaler_cs_vserver – Manage content switching vserver (Will be removed from community.network 6.0.0.)

• community.network.netscaler_gslb_service – Manage gslb service entities in Netscaler. (Will be removed from community.network 6.0.0.)

• community.network.netscaler_gslb_site – Manage gslb site entities in Netscaler. (Will be removed from community.network 6.0.0.)

• community.network.netscaler_gslb_vserver – Configure gslb vserver entities in Netscaler. (Will be removed from community.network 6.0.0.)

• community.network.netscaler_lb_monitor – Manage load balancing monitors (Will be removed from community.network 6.0.0.)

• community.network.netscaler_lb_vserver – Manage load balancing vserver configuration (Will be removed from community.network 6.0.0.)

• community.network.netscaler_nitro_request – Issue Nitro API requests to a Netscaler instance. (Will be removed from community.network 6.0.0.)

• community.network.netscaler_save_config – Save Netscaler configuration. (Will be removed from community.network 6.0.0.)

• community.network.netscaler_server – Manage server configuration (Will be removed from community.network 6.0.0.)

• community.network.netscaler_service – Manage service configuration in Netscaler (Will be removed from community.network 6.0.0.)

• community.network.netscaler_servicegroup – Manage service group configuration in Netscaler (Will be removed from community.network 6.0.0.)

• community.network.netscaler_ssl_certkey – Manage ssl certificate keys. (Will be removed from community.network 6.0.0.)

• community.network.nos_command – Run commands on remote devices running Extreme Networks NOS (Will be removed from community.network 6.0.0.)

• community.network.nos_config – Manage Extreme Networks NOS configuration sections (Will be removed from community.network 6.0.0.)

• community.network.nos_facts – Collect facts from devices running Extreme NOS (Will be removed from community.network 6.0.0.)

• community.network.nuage_vspk – Manage Nuage VSP environments (Will be removed from community.network 6.0.0.)

• community.network.opx_cps – CPS operations on networking device running Openswitch (OPX) (Will be removed from community.network 6.0.0.)

• community.network.ordnance_config – Manage Ordnance configuration sections (Will be removed from community.network 6.0.0.)

• community.network.ordnance_facts – Collect facts from Ordnance Virtual Routers over SSH (Will be removed from community.network 6.0.0.)

• community.network.pn_access_list – CLI command to create/delete access-list (Will be removed from community.network 6.0.0.)

• community.network.pn_access_list_ip – CLI command to add/remove access-list-ip (Will be removed from community.network 6.0.0.)

• community.network.pn_admin_service – CLI command to modify admin-service (Will be removed from community.network 6.0.0.)

• community.network.pn_admin_session_timeout – CLI command to modify admin-session-timeout (Will be removed from community.network 6.0.0.)

• community.network.pn_admin_syslog – CLI command to create/modify/delete admin-syslog (Will be removed from community.network 6.0.0.)

• community.network.pn_connection_stats_settings – CLI command to modify connection-stats-settings (Will be removed from community.network 6.0.0.)

• community.network.pn_cpu_class – CLI command to create/modify/delete cpu-class (Will be removed from community.network 6.0.0.)

• community.network.pn_cpu_mgmt_class – CLI command to modify cpu-mgmt-class (Will be removed from community.network 6.0.0.)

• community.network.pn_dhcp_filter – CLI command to create/modify/delete dhcp-filter (Will be removed from community.network 6.0.0.)

• community.network.pn_dscp_map – CLI command to create/delete dscp-map (Will be removed from community.network 6.0.0.)

• community.network.pn_dscp_map_pri_map – CLI command to modify dscp-map-pri-map (Will be removed from community.network 6.0.0.)

• community.network.pn_fabric_local – CLI command to modify fabric-local (Will be removed from community.network 6.0.0.)

• community.network.pn_igmp_snooping – CLI command to modify igmp-snooping (Will be removed from community.network 6.0.0.)

• community.network.pn_ipv6security_raguard – CLI command to create/modify/delete ipv6security-raguard (Will be removed from community.network 6.0.0.)

• community.network.pn_ipv6security_raguard_port – CLI command to add/remove ipv6security-raguard-port (Will be removed from community.network 6.0.0.)

• community.network.pn_ipv6security_raguard_vlan – CLI command to add/remove ipv6security-raguard-vlan (Will be removed from community.network 6.0.0.)

• community.network.pn_log_audit_exception – CLI command to create/delete an audit exception (Will be removed from community.network 6.0.0.)

• community.network.pn_port_config – CLI command to modify port-config (Will be removed from community.network 6.0.0.)

• community.network.pn_port_cos_bw – CLI command to modify port-cos-bw (Will be removed from community.network 6.0.0.)

• community.network.pn_port_cos_rate_setting – CLI command to modify port-cos-rate-setting (Will be removed from community.network 6.0.0.)

• community.network.pn_prefix_list – CLI command to create/delete prefix-list (Will be removed from community.network 6.0.0.)

• community.network.pn_prefix_list_network – CLI command to add/remove prefix-list-network (Will be removed from community.network 6.0.0.)

• community.network.pn_role – CLI command to create/delete/modify role (Will be removed from community.network 6.0.0.)

• community.network.pn_snmp_community – CLI command to create/modify/delete snmp-community (Will be removed from community.network 6.0.0.)

• community.network.pn_snmp_trap_sink – CLI command to create/delete snmp-trap-sink (Will be removed from community.network 6.0.0.)

• community.network.pn_snmp_vacm – CLI command to create/modify/delete snmp-vacm (Will be removed from community.network 6.0.0.)

• community.network.pn_stp – CLI command to modify stp (Will be removed from community.network 6.0.0.)

• community.network.pn_stp_port – CLI command to modify stp-port. (Will be removed from community.network 6.0.0.)

• community.network.pn_switch_setup – CLI command to modify switch-setup (Will be removed from community.network 6.0.0.)

• community.network.pn_user – CLI command to create/modify/delete user (Will be removed from community.network 6.0.0.)

• community.network.pn_vflow_table_profile – CLI command to modify vflow-table-profile (Will be removed from community.network 6.0.0.)

• community.network.pn_vrouter_bgp – CLI command to add/modify/remove vrouter-bgp (Will be removed from community.network 6.0.0.)

• community.network.pn_vrouter_bgp_network – CLI command to add/remove vrouter-bgp-network (Will be removed from community.network 6.0.0.)

• community.network.pn_vrouter_interface_ip – CLI command to add/remove vrouter-interface-ip (Will be removed from community.network 6.0.0.)

• community.network.pn_vrouter_loopback_interface – CLI command to add/remove vrouter-loopback-interface (Will be removed from community.network 6.0.0.)

• community.network.pn_vrouter_ospf – CLI command to add/remove vrouter-ospf (Will be removed from community.network 6.0.0.)

• community.network.pn_vrouter_ospf6 – CLI command to add/remove vrouter-ospf6 (Will be removed from community.network 6.0.0.)

• community.network.pn_vrouter_packet_relay – CLI command to add/remove vrouter-packet-relay (Will be removed from community.network 6.0.0.)

• community.network.pn_vrouter_pim_config – CLI command to modify vrouter-pim-config (Will be removed from community.network 6.0.0.)

• community.network.pn_vtep – CLI command to create/delete vtep (Will be removed from community.network 6.0.0.)

• community.network.slxos_command – Run commands on remote devices running Extreme Networks SLX-OS (Will be removed from community.network 6.0.0.)

• community.network.slxos_config – Manage Extreme Networks SLX-OS configuration sections (Will be removed from community.network 6.0.0.)

• community.network.slxos_facts – Collect facts from devices running Extreme SLX-OS (Will be removed from community.network 6.0.0.)

• community.network.slxos_interface – Manage Interfaces on Extreme SLX-OS network devices (Will be removed from community.network 6.0.0.)

• community.network.slxos_l2_interface – Manage Layer-2 interface on Extreme Networks SLX-OS devices. (Will be removed from community.network 6.0.0.)

• community.network.slxos_l3_interface – Manage L3 interfaces on Extreme Networks SLX-OS network devices. (Will be removed from community.network 6.0.0.)

• community.network.slxos_linkagg – Manage link aggregation groups on Extreme Networks SLX-OS network devices (Will be removed from community.network 6.0.0.)

• community.network.slxos_lldp – Manage LLDP configuration on Extreme Networks SLX-OS network devices. (Will be removed from community.network 6.0.0.)

• community.network.slxos_vlan – Manage VLANs on Extreme Networks SLX-OS network devices (Will be removed from community.network 6.0.0.)

• community.network.sros_command – Run commands on remote devices running Nokia SR OS (Will be removed from community.network 6.0.0.)

• community.network.sros_config – Manage Nokia SR OS device configuration (Will be removed from community.network 6.0.0.)

• community.network.sros_rollback – Configure Nokia SR OS rollback (Will be removed from community.network 6.0.0.)

• community.network.vdirect_commit – Commits pending configuration changes on Radware devices (Will be removed from community.network 6.0.0.)

• community.network.vdirect_file – Uploads a new or updates an existing runnable file into Radware vDirect server (Will be removed from community.network 6.0.0.)

• community.network.vdirect_runnable – Runs templates and workflow actions in Radware vDirect server (Will be removed from community.network 6.0.0.)

• community.network.voss_command – Run commands on remote devices running Extreme VOSS (Will be removed from community.network 6.0.0.)

• community.network.voss_config – Manage Extreme VOSS configuration sections (Will be removed from community.network 6.0.0.)

• community.network.voss_facts – Collect facts from remote devices running Extreme VOSS (Will be removed from community.network 6.0.0.)

• community.postgresql.postgresql_lang – Adds, removes or changes procedural languages with a PostgreSQL database (Will be removed from community.postgresql 4.0.0.)

• community.vmware.vcenter_folder – Manage folders on given datacenter (Will be removed from community.vmware 7.0.0.)

• community.vmware.vmware_cluster – Manage VMware vSphere clusters (Will be removed from community.vmware 6.0.0.)

• community.vmware.vmware_cluster_dpm – Manage Distributed Power Management (DPM) on VMware vSphere clusters (Will be removed from community.vmware 6.0.0.)

• community.vmware.vmware_cluster_drs – Manage Distributed Resource Scheduler (DRS) on VMware vSphere clusters (Will be removed from community.vmware 6.0.0.)

• community.vmware.vmware_cluster_drs_recommendations – Apply DRS Recommendations (Will be removed from community.vmware 6.0.0.)

• community.vmware.vmware_cluster_ha – Manage High Availability (HA) on VMware vSphere clusters (Will be removed from community.vmware 7.0.0.)

• community.vmware.vmware_cluster_info – Gather info about clusters available in given vCenter (Will be removed from community.vmware 7.0.0.)

• community.vmware.vmware_cluster_vcls – Override the default vCLS (vSphere Cluster Services) VM disk placement for this cluster. (Will be removed from community.vmware 6.0.0.)

• community.vmware.vmware_content_deploy_ovf_template – Deploy Virtual Machine from ovf template stored in content library. (Will be removed from community.vmware 7.0.0.)

• community.vmware.vmware_content_deploy_template – Deploy Virtual Machine from template stored in content library. (Will be removed from community.vmware 7.0.0.)

• community.vmware.vmware_content_library_manager – Create, update and delete VMware content library (Will be removed from community.vmware 7.0.0.)

• community.vmware.vmware_guest_powerstate – Manages power states of virtual machines in vCenter (Will be removed from community.vmware 7.0.0.)

• community.vmware.vmware_host – Add, remove, or move an ESXi host to, from, or within vCenter (Will be removed from community.vmware 7.0.0.)

• community.vmware.vmware_maintenancemode – Place a host into maintenance mode (Will be removed from community.vmware 7.0.0.)

• community.windows.win_domain_computer – Manage computers in Active Directory (Will be removed from community.windows 3.0.0.)

• community.windows.win_domain_group – Creates, modifies or removes domain groups (Will be removed from community.windows 3.0.0.)

• community.windows.win_domain_group_membership – Manage Windows domain group membership (Will be removed from community.windows 3.0.0.)

• community.windows.win_domain_object_info – Gather information an Active Directory object (Will be removed from community.windows 3.0.0.)

• community.windows.win_domain_ou – Manage Active Directory Organizational Units (Will be removed from community.windows 3.0.0.)

• community.windows.win_domain_user – Manages Windows Active Directory user accounts (Will be removed from community.windows 3.0.0.)

• dellemc.openmanage.dellemc_configure_idrac_eventing – Configures the iDRAC eventing related attributes (Will be removed from dellemc.openmanage in a major release after 2024-12-31.)

• dellemc.openmanage.dellemc_configure_idrac_services – Configures the iDRAC services related attributes (Will be removed from dellemc.openmanage in a major release after 2024-12-31.)

• dellemc.openmanage.dellemc_idrac_lc_attributes – Enable or disable Collect System Inventory on Restart (CSIOR) property for all iDRAC/LC jobs (Will be removed from dellemc.openmanage in a major release after 2024-12-31.)

• dellemc.openmanage.dellemc_system_lockdown_mode – Configures system lockdown mode for iDRAC (Will be removed from dellemc.openmanage in a major release after 2024-12-31.)

• dellemc.openmanage.idrac_network – Configures the iDRAC network attributes (Will be removed from dellemc.openmanage in a major release after 2024-12-31.)

• dellemc.openmanage.idrac_timezone_ntp – Configures time zone and NTP on iDRAC (Will be removed from dellemc.openmanage in a major release after 2024-12-31.)

• hitachivantara.vspone_block.vsp.hv_gateway_admin_password – Updates password of gateway admin on Hitachi VSP storage systems. (Will be removed from hitachivantara.vspone_block 4.0.0.)

• hitachivantara.vspone_block.vsp.hv_gateway_subscriber – Manages subscribers of a partner on Hitachi VSP storage systems. (Will be removed from hitachivantara.vspone_block 4.0.0.)

• hitachivantara.vspone_block.vsp.hv_gateway_subscriber_facts – Retrieves information about subscriber on Hitachi VSP storage systems. (Will be removed from hitachivantara.vspone_block 4.0.0.)

• hitachivantara.vspone_block.vsp.hv_gateway_subscription_facts – Retrieves information about resources of a subscriber on Hitachi VSP storage systems. (Will be removed from hitachivantara.vspone_block 4.0.0.)

• hitachivantara.vspone_block.vsp.hv_gateway_unsubscribe_resource – Manages un-subscription of resources for a subscriber on Hitachi VSP storage systems. (Will be removed from hitachivantara.vspone_block 4.0.0.)

• hitachivantara.vspone_block.vsp.hv_storagesystem – Manages Hitachi VSP storage systems. (Will be removed from hitachivantara.vspone_block 4.0.0.)

• hitachivantara.vspone_block.vsp.hv_uaig_token_facts – Retrieves an API token for the Hitachi gateway service host. (Will be removed from hitachivantara.vspone_block 4.0.0.)

• ibm.qradar.log_source_management – Manage Log Sources in QRadar (Will be removed from ibm.qradar in a major release after 2024-09-01.)

• ibm.qradar.rule – Manage state of QRadar Rules, with filter options (Will be removed from ibm.qradar in a major release after 2024-09-01.)

• ibm.qradar.rule_info – Obtain information about one or many QRadar Rules, with filter options (Will be removed from ibm.qradar in a major release after 2024-09-01.)

• junipernetworks.junos.junos_scp – Transfer files from or to remote devices running Junos (Will be removed from junipernetworks.junos in a major release after 2025-01-01.)

• purestorage.flasharray.purefa_sso – Configure Pure Storage FlashArray Single Sign-On (Will be removed from purestorage.flasharray 2.0.0.)

• splunk.es.adaptive_response_notable_event – Manage Splunk Enterprise Security Notable Event Adaptive Responses (Will be removed from splunk.es in a major release after 2024-09-01.)

• splunk.es.correlation_search – Manage Splunk Enterprise Security Correlation Searches (Will be removed from splunk.es in a major release after 2024-09-01.)

• splunk.es.data_input_monitor – Manage Splunk Data Inputs of type Monitor (Will be removed from splunk.es in a major release after 2024-09-01.)

• splunk.es.data_input_network – Manage Splunk Data Inputs of type TCP or UDP (Will be removed from splunk.es in a major release after 2024-09-01.)

• vmware.vmware_rest.appliance_access_consolecli – Set enabled state of the console-based controlled CLI (TTY1). (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_access_consolecli_info – Get enabled state of the console-based controlled CLI (TTY1). (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_access_dcui – Set enabled state of Direct Console User Interface (DCUI TTY2). (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_access_dcui_info – Get enabled state of Direct Console User Interface (DCUI TTY2). (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_access_shell – Set enabled state of BASH, that is, access to BASH from within the controlled CLI. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_access_shell_info – Get enabled state of BASH, that is, access to BASH from within the controlled CLI. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_access_ssh – Set enabled state of the SSH-based controlled CLI. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_access_ssh_info – Get enabled state of the SSH-based controlled CLI. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_dns_domains – Set DNS search domains. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_dns_domains_info – Get list of DNS search domains. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_dns_hostname – Set the Fully Qualified Domain Name. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_dns_hostname_info – Get the Fully Qualified Doman Name. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_dns_servers – Set the DNS server configuration (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_dns_servers_info – Get DNS server configuration. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_firewall_inbound – Set the ordered list of firewall rules to allow or deny traffic from one or more incoming IP addresses (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_firewall_inbound_info – Get the ordered list of firewall rules (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_noproxy – Sets servers for which no proxy configuration should be applied (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_noproxy_info – Returns servers for which no proxy configuration will be applied. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_proxy – Configures which proxy server to use for the specified protocol (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_networking_proxy_info – Gets the proxy configuration for a specific protocol. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_ntp – Set NTP servers (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_ntp_info – Get the NTP configuration status (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_system_globalfips – Enable/Disable Global FIPS mode for the appliance (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_system_globalfips_info – Get current appliance FIPS settings. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_system_time_timezone – Set time zone. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_system_time_timezone_info – Get time zone. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_timesync – Set time synchronization mode. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.appliance_timesync_info – Get time synchronization mode. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.content_library_item_info – Returns the ItemModel with the given identifier. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.content_locallibrary – Creates a new local library. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.content_subscribedlibrary – Creates a new subscribed library (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vcenter_cluster_info – Retrieves information about the cluster corresponding to cluster. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vcenter_host – Add a new standalone host in the vCenter inventory (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vcenter_vm_guest_networking_interfaces_info – Returns information about the networking interfaces in the guest operating system. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vcenter_vm_guest_power – Issues a request to the guest operating system asking it to perform a soft shutdown, standby (suspend) or soft reboot (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vcenter_vm_hardware_cpu_info – Returns the CPU-related settings of a virtual machine. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vcenter_vm_hardware_memory_info – Returns the memory-related settings of a virtual machine. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vcenter_vm_libraryitem_info – Returns the information about the library item associated with the virtual machine. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vcenter_vm_power – Operate a boot, hard shutdown, hard reset or hard suspend on a guest. (Will be removed from vmware.vmware_rest 5.0.0.)

• vmware.vmware_rest.vcenter_vmtemplate_libraryitems_info – Returns information about a virtual machine template contained in the library item specified by templateLibraryItem (Will be removed from vmware.vmware_rest 5.0.0.)

• vyos.vyos.vyos_logging – Manage logging on network devices (Will be removed from vyos.vyos in a major release after 2023-08-01.)

Index of all deprecated netconf plugins

• community.network.ce – Use ce netconf plugin to run netconf commands on Huawei Cloudengine platform (Will be removed from community.network 6.0.0.)