fortinet.fortimanager.fmgr_firewall_vip6_dynamicmapping – Configure virtual IP for IPv6.

Note

This plugin is part of the fortinet.fortimanager collection (version 2.1.4).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortimanager.

To use it in a playbook, specify: fortinet.fortimanager.fmgr_firewall_vip6_dynamicmapping.

New in version 2.10: of fortinet.fortimanager

Synopsis

  • This module is able to configure a FortiManager device.

  • Examples include all parameters and values which need to be adjusted to data sources before usage.

Parameters

Parameter Choices/Defaults Comments
adom
string / required
the parameter (adom) in requested url
bypass_validation
boolean
    Choices:
  • no ←
  • yes
only set to True when module schema diffs with FortiManager API structure, module continues to execute without validating parameters
enable_log
boolean
    Choices:
  • no ←
  • yes
Enable/Disable logging for task
firewall_vip6_dynamicmapping
dictionary
the top level parameters set
_scope
list / elements=string
no description
name
string
Name.
vdom
string
Vdom.
arp-reply
string
    Choices:
  • disable
  • enable
Enable to respond to ARP requests for this virtual IP address. Enabled by default.
color
integer
Color of icon on the GUI.
comment
string
Comment.
extip
string
IP address or address range on the external interface that you want to map to an address or address range on the destination n...
extport
string
Incoming port number range that you want to map to a port number range on the destination network.
http-cookie-age
integer
Time in minutes that client web browsers should keep a cookie. Default is 60 seconds. 0 = no time limit.
http-cookie-domain
string
Domain that HTTP cookie persistence should apply to.
http-cookie-domain-from-host
string
    Choices:
  • disable
  • enable
Enable/disable use of HTTP cookie domain from host field in HTTP.
http-cookie-generation
integer
Generation of HTTP cookie to be accepted. Changing invalidates all existing cookies.
http-cookie-path
string
Limit HTTP cookie persistence to the specified path.
http-cookie-share
string
    Choices:
  • disable
  • same-ip
Control sharing of cookies across virtual servers. same-ip means a cookie from one virtual server can be used by another. Disa...
http-ip-header
string
    Choices:
  • disable
  • enable
For HTTP multiplexing, enable to add the original client IP address in the XForwarded-For HTTP header.
http-ip-header-name
string
For HTTP multiplexing, enter a custom HTTPS header name. The original client IP address is added to this header. If empty, X-F...
http-multiplex
string
    Choices:
  • disable
  • enable
Enable/disable HTTP multiplexing.
http-redirect
string
    Choices:
  • disable
  • enable
Enable/disable redirection of HTTP to HTTPS
https-cookie-secure
string
    Choices:
  • disable
  • enable
Enable/disable verification that inserted HTTPS cookies are secure.
id
integer
Custom defined ID.
ldb-method
string
    Choices:
  • static
  • round-robin
  • weighted
  • least-session
  • least-rtt
  • first-alive
  • http-host
Method used to distribute sessions to real servers.
mappedip
string
Mapped IP address range in the format startIP-endIP.
mappedport
string
Port number range on the destination network to which the external port number range is mapped.
max-embryonic-connections
integer
Maximum number of incomplete connections.
monitor
string
Name of the health check monitor to use when polling to determine a virtual servers connectivity status.
nat-source-vip
string
    Choices:
  • disable
  • enable
Nat-Source-Vip.
outlook-web-access
string
    Choices:
  • disable
  • enable
Enable to add the Front-End-Https header for Microsoft Outlook Web Access.
persistence
string
    Choices:
  • none
  • http-cookie
  • ssl-session-id
Configure how to make sure that clients connect to the same server every time they make a request that is part of the same ses...
portforward
string
    Choices:
  • disable
  • enable
Enable port forwarding.
protocol
string
    Choices:
  • tcp
  • udp
  • sctp
Protocol to use when forwarding packets.
server-type
string
    Choices:
  • http
  • https
  • ssl
  • tcp
  • udp
  • ip
  • imaps
  • pop3s
  • smtps
Protocol to be load balanced by the virtual server (also called the server load balance virtual IP).
src-filter
string
no description
ssl-algorithm
string
    Choices:
  • high
  • low
  • medium
  • custom
Permitted encryption algorithms for SSL sessions according to encryption strength.
ssl-certificate
string
The name of the SSL certificate to use for SSL acceleration.
ssl-client-fallback
string
    Choices:
  • disable
  • enable
Enable/disable support for preventing Downgrade Attacks on client connections (RFC 7507).
ssl-client-rekey-count
integer
Maximum length of data in MB before triggering a client rekey (0 = disable).
ssl-client-renegotiation
string
    Choices:
  • deny
  • allow
  • secure
Allow, deny, or require secure renegotiation of client sessions to comply with RFC 5746.
ssl-client-session-state-max
integer
Maximum number of client to FortiGate SSL session states to keep.
ssl-client-session-state-timeout
integer
Number of minutes to keep client to FortiGate SSL session state.
ssl-client-session-state-type
string
    Choices:
  • disable
  • time
  • count
  • both
How to expire SSL sessions for the segment of the SSL connection between the client and the FortiGate.
ssl-dh-bits
string
    Choices:
  • 768
  • 1024
  • 1536
  • 2048
  • 3072
  • 4096
Number of bits to use in the Diffie-Hellman exchange for RSA encryption of SSL sessions.
ssl-hpkp
string
    Choices:
  • disable
  • enable
  • report-only
Enable/disable including HPKP header in response.
ssl-hpkp-age
integer
Number of minutes the web browser should keep HPKP.
ssl-hpkp-backup
string
Certificate to generate backup HPKP pin from.
ssl-hpkp-include-subdomains
string
    Choices:
  • disable
  • enable
Indicate that HPKP header applies to all subdomains.
ssl-hpkp-primary
string
Certificate to generate primary HPKP pin from.
ssl-hpkp-report-uri
string
URL to report HPKP violations to.
ssl-hsts
string
    Choices:
  • disable
  • enable
Enable/disable including HSTS header in response.
ssl-hsts-age
integer
Number of seconds the client should honour the HSTS setting.
ssl-hsts-include-subdomains
string
    Choices:
  • disable
  • enable
Indicate that HSTS header applies to all subdomains.
ssl-http-location-conversion
string
    Choices:
  • disable
  • enable
Enable to replace HTTP with HTTPS in the replys Location HTTP header field.
ssl-http-match-host
string
    Choices:
  • disable
  • enable
Enable/disable HTTP host matching for location conversion.
ssl-max-version
string
    Choices:
  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2
  • tls-1.3
Highest SSL/TLS version acceptable from a client.
ssl-min-version
string
    Choices:
  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2
  • tls-1.3
Lowest SSL/TLS version acceptable from a client.
ssl-mode
string
    Choices:
  • half
  • full
Apply SSL offloading between the client and the FortiGate (half) or from the client to the FortiGate and from the FortiGate to...
ssl-pfs
string
    Choices:
  • require
  • deny
  • allow
Select the cipher suites that can be used for SSL perfect forward secrecy (PFS). Applies to both client and server sessions.
ssl-send-empty-frags
string
    Choices:
  • disable
  • enable
Enable/disable sending empty fragments to avoid CBC IV attacks (SSL 3.0 & TLS 1.0 only). May need to be disabled for compatibi...
ssl-server-algorithm
string
    Choices:
  • high
  • low
  • medium
  • custom
  • client
Permitted encryption algorithms for the server side of SSL full mode sessions according to encryption strength.
ssl-server-max-version
string
    Choices:
  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2
  • client
  • tls-1.3
Highest SSL/TLS version acceptable from a server. Use the client setting by default.
ssl-server-min-version
string
    Choices:
  • ssl-3.0
  • tls-1.0
  • tls-1.1
  • tls-1.2
  • client
  • tls-1.3
Lowest SSL/TLS version acceptable from a server. Use the client setting by default.
ssl-server-session-state-max
integer
Maximum number of FortiGate to Server SSL session states to keep.
ssl-server-session-state-timeout
integer
Number of minutes to keep FortiGate to Server SSL session state.
ssl-server-session-state-type
string
    Choices:
  • disable
  • time
  • count
  • both
How to expire SSL sessions for the segment of the SSL connection between the server and the FortiGate.
type
string
    Choices:
  • static-nat
  • server-load-balance
Configure a static NAT or server load balance VIP.
uuid
string
Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
weblogic-server
string
    Choices:
  • disable
  • enable
Enable to add an HTTP header to indicate SSL offloading for a WebLogic server.
websphere-server
string
    Choices:
  • disable
  • enable
Enable to add an HTTP header to indicate SSL offloading for a WebSphere server.
proposed_method
string
    Choices:
  • update
  • set
  • add
The overridden method for the underlying Json RPC request
rc_failed
list / elements=string
the rc codes list with which the conditions to fail will be overriden
rc_succeeded
list / elements=string
the rc codes list with which the conditions to succeed will be overriden
state
string / required
    Choices:
  • present
  • absent
the directive to create, update or delete an object
vip6
string / required
the parameter (vip6) in requested url
workspace_locking_adom
string
the adom to lock for FortiManager running in workspace mode, the value can be global and others including root
workspace_locking_timeout
integer
Default:
300
the maximum time in seconds to wait for other user to release the workspace lock

Notes

Note

  • Running in workspace locking mode is supported in this FortiManager module, the top level parameters workspace_locking_adom and workspace_locking_timeout help do the work.

  • To create or update an object, use state present directive.

  • To delete an object, use state absent directive.

  • Normally, running one module can fail when a non-zero rc is returned. you can also override the conditions to fail or succeed with parameters rc_failed and rc_succeeded

Examples

- hosts: fortimanager00
  collections:
    - fortinet.fortimanager
  connection: httpapi
  vars:
     ansible_httpapi_use_ssl: True
     ansible_httpapi_validate_certs: False
     ansible_httpapi_port: 443
  tasks:
   - name: Configure dynamic mappings of virtual IP for IPv6
     fmgr_firewall_vip6_dynamicmapping:
        bypass_validation: False
        adom: ansible
        vip6: 'ansible-test-vip6' # name
        state: present
        firewall_vip6_dynamicmapping:
           _scope:
             -
                 name: FGT_AWS # need a valid device name
                 vdom: root # need a valid vdom name under the device
           arp-reply: disable
           color: 1
           comment: 'ansible-comment'
           id: 1

- name: gathering fortimanager facts
  hosts: fortimanager00
  gather_facts: no
  connection: httpapi
  collections:
    - fortinet.fortimanager
  vars:
    ansible_httpapi_use_ssl: True
    ansible_httpapi_validate_certs: False
    ansible_httpapi_port: 443
  tasks:
   - name: retrieve all the dynamic mappings of virtual IP for IPv6
     fmgr_fact:
       facts:
           selector: 'firewall_vip6_dynamicmapping'
           params:
               adom: 'ansible'
               vip6: 'ansible-test-vip6' # name
               dynamic_mapping: ''

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
request_url
string
always
The full url requested

Sample:
/sys/login/user
response_code
integer
always
The status of api request

response_message
string
always
The descriptive message of the api response

Sample:
OK.


Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Frank Shen (@fshen01)

  • Hongbin Lu (@fgtdev-hblu)