fortinet.fortios.fortios_firewall_interface_policy module – Configure IPv4 interface policies in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.7).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_interface_policy.

New in version 2.0.0: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and interface_policy category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • no ← (default)

  • yes

firewall_interface_policy

dictionary

Configure IPv4 interface policies.

address_type

string

Policy address type (IPv4 or IPv6).

Choices:

  • ipv4

  • ipv6

application_list

string

Application list name. Source application.list.name.

application_list_status

string

Enable/disable application control.

Choices:

  • enable

  • disable

av_profile

string

Antivirus profile. Source antivirus.profile.name.

av_profile_status

string

Enable/disable antivirus.

Choices:

  • enable

  • disable

comments

string

Comments.

dlp_profile

string

DLP profile name. Source dlp.profile.name.

dlp_profile_status

string

Enable/disable DLP.

Choices:

  • enable

  • disable

dlp_sensor

string

DLP sensor name. Source dlp.sensor.name.

dlp_sensor_status

string

Enable/disable DLP.

Choices:

  • enable

  • disable

dsri

string

Enable/disable DSRI.

Choices:

  • enable

  • disable

dstaddr

list / elements=dictionary

Address object to limit traffic monitoring to network traffic sent to the specified address or range.

name

string

Address name. Source firewall.address.name firewall.addrgrp.name.

emailfilter_profile

string

Email filter profile. Source emailfilter.profile.name.

emailfilter_profile_status

string

Enable/disable email filter.

Choices:

  • enable

  • disable

interface

string

Monitored interface name from available interfaces. Source system.zone.name system.interface.name.

ips_sensor

string

IPS sensor name. Source ips.sensor.name.

ips_sensor_status

string

Enable/disable IPS.

Choices:

  • enable

  • disable

label

string

Label.

logtraffic

string

Logging type to be used in this policy (Options: all | utm | disable).

Choices:

  • all

  • utm

  • disable

policyid

integer / required

Policy ID (0 - 4294967295).

scan_botnet_connections

string

Enable/disable scanning for connections to Botnet servers.

Choices:

  • disable

  • block

  • monitor

service

list / elements=dictionary

Service object from available options.

name

string

Service name. Source firewall.service.custom.name firewall.service.group.name.

spamfilter_profile

string

Antispam profile. Source spamfilter.profile.name.

spamfilter_profile_status

string

Enable/disable antispam.

Choices:

  • enable

  • disable

srcaddr

list / elements=dictionary

Address object to limit traffic monitoring to network traffic sent from the specified address or range.

name

string

Address name. Source firewall.address.name firewall.addrgrp.name.

status

string

Enable/disable this policy.

Choices:

  • enable

  • disable

webfilter_profile

string

Web filter profile. Source webfilter.profile.name.

webfilter_profile_status

string

Enable/disable web filtering.

Choices:

  • enable

  • disable

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • present

  • absent

state

string / required

Indicates whether to create or remove the object.

Choices:

  • present

  • absent

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: “root”

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPv4 interface policies.
    fortios_firewall_interface_policy:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_interface_policy:
        address_type: "ipv4"
        application_list: "<your_own_value> (source application.list.name)"
        application_list_status: "enable"
        av_profile: "<your_own_value> (source antivirus.profile.name)"
        av_profile_status: "enable"
        comments: "<your_own_value>"
        dlp_profile: "<your_own_value> (source dlp.profile.name)"
        dlp_profile_status: "enable"
        dlp_sensor: "<your_own_value> (source dlp.sensor.name)"
        dlp_sensor_status: "enable"
        dsri: "enable"
        dstaddr:
         -
            name: "default_name_15 (source firewall.address.name firewall.addrgrp.name)"
        emailfilter_profile: "<your_own_value> (source emailfilter.profile.name)"
        emailfilter_profile_status: "enable"
        interface: "<your_own_value> (source system.zone.name system.interface.name)"
        ips_sensor: "<your_own_value> (source ips.sensor.name)"
        ips_sensor_status: "enable"
        label: "<your_own_value>"
        logtraffic: "all"
        policyid: "23"
        scan_botnet_connections: "disable"
        service:
         -
            name: "default_name_26 (source firewall.service.custom.name firewall.service.group.name)"
        spamfilter_profile: "<your_own_value> (source spamfilter.profile.name)"
        spamfilter_profile_status: "enable"
        srcaddr:
         -
            name: "default_name_30 (source firewall.address.name firewall.addrgrp.name)"
        status: "enable"
        webfilter_profile: "<your_own_value> (source webfilter.profile.name)"
        webfilter_profile_status: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: “1547”

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: “PUT”

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: “200”

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: “id”

name

string

Name of the table used to fulfill the request

Returned: always

Sample: “urlfilter”

path

string

Path of the table used to fulfill the request

Returned: always

Sample: “webfilter”

revision

string

Internal revision number

Returned: always

Sample: “17.0.2.10658”

serial

string

Serial number of the unit

Returned: always

Sample: “FGVMEVYYQT3AB5352”

status

string

Indication of the operation’s result

Returned: always

Sample: “success”

vdom

string

Virtual domain used

Returned: always

Sample: “root”

version

string

Version of the FortiGate

Returned: always

Sample: “v5.6.3”

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)