fortinet.fortios.fortios_router_ospf6 module – Configure IPv6 OSPF in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.7).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_router_ospf6.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and ospf6 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

router_ospf6

dictionary

Configure IPv6 OSPF.

abr_type

string

Area border router type.

Choices:

  • "cisco"

  • "ibm"

  • "standard"

area

list / elements=dictionary

OSPF6 area configuration.

authentication

string

Authentication mode.

Choices:

  • "none"

  • "ah"

  • "esp"

default_cost

integer

Summary default cost of stub or NSSA area.

id

string

Area entry IP address.

ipsec_auth_alg

string

Authentication algorithm.

Choices:

  • "md5"

  • "sha1"

  • "sha256"

  • "sha384"

  • "sha512"

ipsec_enc_alg

string

Encryption algorithm.

Choices:

  • "None"

  • "des"

  • "3des"

  • "aes128"

  • "aes192"

  • "aes256"

ipsec_keys

list / elements=dictionary

IPsec authentication and encryption keys.

auth_key

string

Authentication key.

enc_key

string

Encryption key.

spi

integer

Security Parameters Index.

key_rollover_interval

integer

Key roll-over interval.

nssa_default_information_originate

string

Enable/disable originate type 7 default into NSSA area.

Choices:

  • "enable"

  • "disable"

nssa_default_information_originate_metric

integer

OSPFv3 default metric.

nssa_default_information_originate_metric_type

string

OSPFv3 metric type for default routes.

Choices:

  • "1"

  • "2"

nssa_redistribution

string

Enable/disable redistribute into NSSA area.

Choices:

  • "enable"

  • "disable"

nssa_translator_role

string

NSSA translator role type.

Choices:

  • "candidate"

  • "never"

  • "always"

range

list / elements=dictionary

OSPF6 area range configuration.

advertise

string

Enable/disable advertise status.

Choices:

  • "disable"

  • "enable"

id

integer

Range entry ID.

prefix6

string

IPv6 prefix.

stub_type

string

Stub summary setting.

Choices:

  • "no-summary"

  • "summary"

type

string

Area type setting.

Choices:

  • "regular"

  • "nssa"

  • "stub"

list / elements=dictionary

OSPF6 virtual link configuration.

string

Authentication mode.

Choices:

  • "none"

  • "ah"

  • "esp"

  • "area"

integer

Dead interval.

integer

Hello interval.

string

Authentication algorithm.

Choices:

  • "md5"

  • "sha1"

  • "sha256"

  • "sha384"

  • "sha512"

string

Encryption algorithm.

Choices:

  • "None"

  • "des"

  • "3des"

  • "aes128"

  • "aes192"

  • "aes256"

list / elements=dictionary

IPsec authentication and encryption keys.

string

Authentication key.

string

Encryption key.

integer

Security Parameters Index.

integer

Key roll-over interval.

string

Virtual link entry name.

string

A.B.C.D, peer router ID.

integer

Retransmit interval.

integer

Transmit delay.

auto_cost_ref_bandwidth

integer

Reference bandwidth in terms of megabits per second.

bfd

string

Enable/disable Bidirectional Forwarding Detection (BFD).

Choices:

  • "enable"

  • "disable"

default_information_metric

integer

Default information metric.

default_information_metric_type

string

Default information metric type.

Choices:

  • "1"

  • "2"

default_information_originate

string

Enable/disable generation of default route.

Choices:

  • "enable"

  • "always"

  • "disable"

default_information_route_map

string

Default information route map. Source router.route-map.name.

default_metric

integer

Default metric of redistribute routes.

log_neighbour_changes

string

Log OSPFv3 neighbor changes.

Choices:

  • "enable"

  • "disable"

ospf6_interface

list / elements=dictionary

OSPF6 interface configuration.

area_id

string

A.B.C.D, in IPv4 address format.

authentication

string

Authentication mode.

Choices:

  • "none"

  • "ah"

  • "esp"

  • "area"

bfd

string

Enable/disable Bidirectional Forwarding Detection (BFD).

Choices:

  • "global"

  • "enable"

  • "disable"

cost

integer

Cost of the interface, value range from 0 to 65535, 0 means auto-cost.

dead_interval

integer

Dead interval.

hello_interval

integer

Hello interval.

interface

string

Configuration interface name. Source system.interface.name.

ipsec_auth_alg

string

Authentication algorithm.

Choices:

  • "md5"

  • "sha1"

  • "sha256"

  • "sha384"

  • "sha512"

ipsec_enc_alg

string

Encryption algorithm.

Choices:

  • "None"

  • "des"

  • "3des"

  • "aes128"

  • "aes192"

  • "aes256"

ipsec_keys

list / elements=dictionary

IPsec authentication and encryption keys.

auth_key

string

Authentication key.

enc_key

string

Encryption key.

spi

integer

Security Parameters Index.

key_rollover_interval

integer

Key roll-over interval.

mtu

integer

MTU for OSPFv3 packets.

mtu_ignore

string

Enable/disable ignoring MTU field in DBD packets.

Choices:

  • "enable"

  • "disable"

name

string

Interface entry name.

neighbor

list / elements=dictionary

OSPFv3 neighbors are used when OSPFv3 runs on non-broadcast media.

cost

integer

Cost of the interface, value range from 0 to 65535, 0 means auto-cost.

ip6

string

IPv6 link local address of the neighbor.

poll_interval

integer

Poll interval time in seconds.

priority

integer

Priority.

network_type

string

Network type.

Choices:

  • "broadcast"

  • "point-to-point"

  • "non-broadcast"

  • "point-to-multipoint"

  • "point-to-multipoint-non-broadcast"

priority

integer

Priority.

retransmit_interval

integer

Retransmit interval.

status

string

Enable/disable OSPF6 routing on this interface.

Choices:

  • "disable"

  • "enable"

transmit_delay

integer

Transmit delay.

passive_interface

list / elements=dictionary

Passive interface configuration.

name

string

Passive interface name. Source system.interface.name.

redistribute

list / elements=dictionary

Redistribute configuration.

metric

integer

Redistribute metric setting.

metric_type

string

Metric type.

Choices:

  • "1"

  • "2"

name

string

Redistribute name.

routemap

string

Route map name. Source router.route-map.name.

status

string

Status.

Choices:

  • "enable"

  • "disable"

restart_mode

string

OSPFv3 restart mode (graceful or none).

Choices:

  • "none"

  • "graceful-restart"

restart_on_topology_change

string

Enable/disable continuing graceful restart upon topology change.

Choices:

  • "enable"

  • "disable"

restart_period

integer

Graceful restart period in seconds.

router_id

string

A.B.C.D, in IPv4 address format.

spf_timers

string

SPF calculation frequency.

summary_address

list / elements=dictionary

IPv6 address summary configuration.

advertise

string

Enable/disable advertise status.

Choices:

  • "disable"

  • "enable"

id

integer

Summary address entry ID.

prefix6

string

IPv6 prefix.

tag

integer

Tag value.

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPv6 OSPF.
    fortios_router_ospf6:
      vdom:  "{{ vdom }}"
      router_ospf6:
        abr_type: "cisco"
        area:
         -
            authentication: "none"
            default_cost: "6"
            id:  "7"
            ipsec_auth_alg: "md5"
            ipsec_enc_alg: "null"
            ipsec_keys:
             -
                auth_key: "<your_own_value>"
                enc_key: "<your_own_value>"
                spi: "13"
            key_rollover_interval: "14"
            nssa_default_information_originate: "enable"
            nssa_default_information_originate_metric: "16"
            nssa_default_information_originate_metric_type: "1"
            nssa_redistribution: "enable"
            nssa_translator_role: "candidate"
            range:
             -
                advertise: "disable"
                id:  "22"
                prefix6: "<your_own_value>"
            stub_type: "no-summary"
            type: "regular"
            virtual_link:
             -
                authentication: "none"
                dead_interval: "28"
                hello_interval: "29"
                ipsec_auth_alg: "md5"
                ipsec_enc_alg: "null"
                ipsec_keys:
                 -
                    auth_key: "<your_own_value>"
                    enc_key: "<your_own_value>"
                    spi: "35"
                key_rollover_interval: "36"
                name: "default_name_37"
                peer: "<your_own_value>"
                retransmit_interval: "39"
                transmit_delay: "40"
        auto_cost_ref_bandwidth: "41"
        bfd: "enable"
        default_information_metric: "43"
        default_information_metric_type: "1"
        default_information_originate: "enable"
        default_information_route_map: "<your_own_value> (source router.route-map.name)"
        default_metric: "47"
        log_neighbour_changes: "enable"
        ospf6_interface:
         -
            area_id: "<your_own_value>"
            authentication: "none"
            bfd: "global"
            cost: "53"
            dead_interval: "54"
            hello_interval: "55"
            interface: "<your_own_value> (source system.interface.name)"
            ipsec_auth_alg: "md5"
            ipsec_enc_alg: "null"
            ipsec_keys:
             -
                auth_key: "<your_own_value>"
                enc_key: "<your_own_value>"
                spi: "62"
            key_rollover_interval: "63"
            mtu: "64"
            mtu_ignore: "enable"
            name: "default_name_66"
            neighbor:
             -
                cost: "68"
                ip6: "<your_own_value>"
                poll_interval: "70"
                priority: "71"
            network_type: "broadcast"
            priority: "73"
            retransmit_interval: "74"
            status: "disable"
            transmit_delay: "76"
        passive_interface:
         -
            name: "default_name_78 (source system.interface.name)"
        redistribute:
         -
            metric: "80"
            metric_type: "1"
            name: "default_name_82"
            routemap: "<your_own_value> (source router.route-map.name)"
            status: "enable"
        restart_mode: "none"
        restart_on_topology_change: "enable"
        restart_period: "87"
        router_id: "<your_own_value>"
        spf_timers: "<your_own_value>"
        summary_address:
         -
            advertise: "disable"
            id:  "92"
            prefix6: "<your_own_value>"
            tag: "94"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)