fortinet.fortios.fortios_router_static – Configure IPv4 static routing tables in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection.

To install it use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_router_static.

New in version 2.8: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and static category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments
host
string
FortiOS or FortiGate IP address.
https
boolean
    Choices:
  • no
  • yes ←
Indicates if the requests towards FortiGate must use HTTPS protocol.
password
string
Default:
""
FortiOS or FortiGate password.
router_static
dictionary
Configure IPv4 static routing tables.
bfd
string
    Choices:
  • enable
  • disable
Enable/disable Bidirectional Forwarding Detection (BFD).
blackhole
string
    Choices:
  • enable
  • disable
Enable/disable black hole.
comment
string
Optional comments.
device
string
Gateway out interface or tunnel. Source system.interface.name.
distance
integer
Administrative distance (1 - 255).
dst
string
Destination IP and mask for this route.
dstaddr
string
Name of firewall address or address group. Source firewall.address.name firewall.addrgrp.name.
dynamic_gateway
string
    Choices:
  • enable
  • disable
Enable use of dynamic gateway retrieved from a DHCP or PPP server.
gateway
string
Gateway IP for this route.
internet_service
integer
Application ID in the Internet service database. Source firewall.internet-service.id.
internet_service_custom
string
Application name in the Internet service custom database. Source firewall.internet-service-custom.name.
link_monitor_exempt
string
    Choices:
  • enable
  • disable
Enable/disable withdrawing this route when link monitor or health check is down.
priority
integer
Administrative priority (0 - 4294967295).
seq_num
integer
Sequence number.
src
string
Source prefix for this route.
state
string
    Choices:
  • present
  • absent
Deprecated
Starting with Ansible 2.9 we recommend using the top-level 'state' parameter.

Indicates whether to create or remove the object.
status
string
    Choices:
  • enable
  • disable
Enable/disable this static route.
virtual_wan_link
string
    Choices:
  • enable
  • disable
Enable/disable egress through the virtual-wan-link.
vrf
integer
Virtual Routing Forwarding ID.
weight
integer
Administrative weight (0 - 255).
ssl_verify
boolean
added in 2.9 of fortinet.fortios
    Choices:
  • no
  • yes ←
Ensures FortiGate certificate must be verified by a proper CA.
state
string
added in 2.9 of fortinet.fortios
    Choices:
  • present
  • absent
Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
username
string
FortiOS or FortiGate username.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPv4 static routing tables.
    fortios_router_static:
      vdom:  "{{ vdom }}"
      state: "present"
      router_static:
        bfd: "enable"
        blackhole: "enable"
        comment: "Optional comments."
        device: "<your_own_value> (source system.interface.name)"
        distance: "7"
        dst: "<your_own_value>"
        dstaddr: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        dynamic_gateway: "enable"
        gateway: "<your_own_value>"
        internet_service: "12 (source firewall.internet-service.id)"
        internet_service_custom: "<your_own_value> (source firewall.internet-service-custom.name)"
        link_monitor_exempt: "enable"
        priority: "15"
        seq_num: "16"
        src: "<your_own_value>"
        status: "enable"
        virtual_wan_link: "enable"
        vrf: "20"
        weight: "21"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Authors

  • Link Zheng (@chillancezen)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Jie Xue (@JieX19)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)