fortinet.fortios.fortios_system_pppoe_interface module – Configure the PPPoE interfaces in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.1.7).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_system_pppoe_interface.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and pppoe_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

state

string / required

Indicates whether to create or remove the object.

Choices:

  • "present"

  • "absent"

system_pppoe_interface

dictionary

Configure the PPPoE interfaces.

ac_name

string

PPPoE AC name.

auth_type

string

PPP authentication type to use.

Choices:

  • "auto"

  • "pap"

  • "chap"

  • "mschapv1"

  • "mschapv2"

device

string

Name for the physical interface. Source system.interface.name.

dial_on_demand

string

Enable/disable dial on demand to dial the PPPoE interface when packets are routed to the PPPoE interface.

Choices:

  • "enable"

  • "disable"

disc_retry_timeout

integer

PPPoE discovery init timeout value in (0-4294967295 sec).

idle_timeout

integer

PPPoE auto disconnect after idle timeout (0-4294967295 sec).

ipunnumbered

string

PPPoE unnumbered IP.

ipv6

string

Enable/disable IPv6 Control Protocol (IPv6CP).

Choices:

  • "enable"

  • "disable"

lcp_echo_interval

integer

Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.

lcp_max_echo_fails

integer

Maximum missed LCP echo messages before disconnect.

name

string / required

Name of the PPPoE interface.

padt_retry_timeout

integer

PPPoE terminate timeout value in (0-4294967295 sec).

password

string

Enter the password.

pppoe_unnumbered_negotiate

string

Enable/disable PPPoE unnumbered negotiation.

Choices:

  • "enable"

  • "disable"

service_name

string

PPPoE service name.

username

string

User name.

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure the PPPoE interfaces.
    fortios_system_pppoe_interface:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      system_pppoe_interface:
        ac_name: "<your_own_value>"
        auth_type: "auto"
        device: "<your_own_value> (source system.interface.name)"
        dial_on_demand: "enable"
        disc_retry_timeout: "7"
        idle_timeout: "8"
        ipunnumbered: "<your_own_value>"
        ipv6: "enable"
        lcp_echo_interval: "11"
        lcp_max_echo_fails: "12"
        name: "default_name_13"
        padt_retry_timeout: "14"
        password: "<your_own_value>"
        pppoe_unnumbered_negotiate: "enable"
        service_name: "<your_own_value>"
        username: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)