fortinet.fortios.fortios_vpn_ipsec_manualkey_interface – Configure IPsec manual keys in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection.

To install it use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_vpn_ipsec_manualkey_interface.

New in version 2.8: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify vpn_ipsec feature and manualkey_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments
host
string
FortiOS or FortiGate IP address.
https
boolean
    Choices:
  • no
  • yes ←
Indicates if the requests towards FortiGate must use HTTPS protocol.
password
string
Default:
""
FortiOS or FortiGate password.
ssl_verify
boolean
added in 2.9 of fortinet.fortios
    Choices:
  • no
  • yes ←
Ensures FortiGate certificate must be verified by a proper CA.
state
string
added in 2.9 of fortinet.fortios
    Choices:
  • present
  • absent
Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
username
string
FortiOS or FortiGate username.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
vpn_ipsec_manualkey_interface
dictionary
Configure IPsec manual keys.
addr_type
string
    Choices:
  • 4
  • 6
IP version to use for IP packets.
auth_alg
string
    Choices:
  • None ←
  • md5
  • sha1
  • sha256
  • sha384
  • sha512
Authentication algorithm. Must be the same for both ends of the tunnel.
auth_key
string
Hexadecimal authentication key in 16-digit (8-byte) segments separated by hyphens.
enc_alg
string
    Choices:
  • None ←
  • des
  • 3des
  • aes128
  • aes192
  • aes256
  • aria128
  • aria192
  • aria256
  • seed
Encryption algorithm. Must be the same for both ends of the tunnel.
enc_key
string
Hexadecimal encryption key in 16-digit (8-byte) segments separated by hyphens.
interface
string
Name of the physical, aggregate, or VLAN interface. Source system.interface.name.
ip_version
string
    Choices:
  • 4
  • 6
IP version to use for VPN interface.
local_gw
string
IPv4 address of the local gateway"s external interface.
local_gw6
string
Local IPv6 address of VPN gateway.
local_spi
string
Local SPI, a hexadecimal 8-digit (4-byte) tag. Discerns between two traffic streams with different encryption rules.
name
string / required
IPsec tunnel name.
npu_offload
string
    Choices:
  • enable
  • disable
Enable/disable offloading IPsec VPN manual key sessions to NPUs.
remote_gw
string
IPv4 address of the remote gateway"s external interface.
remote_gw6
string
Remote IPv6 address of VPN gateway.
remote_spi
string
Remote SPI, a hexadecimal 8-digit (4-byte) tag. Discerns between two traffic streams with different encryption rules.
state
string
    Choices:
  • present
  • absent
Deprecated
Starting with Ansible 2.9 we recommend using the top-level 'state' parameter.

Indicates whether to create or remove the object.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPsec manual keys.
    fortios_vpn_ipsec_manualkey_interface:
      vdom:  "{{ vdom }}"
      state: "present"
      vpn_ipsec_manualkey_interface:
        addr_type: "4"
        auth_alg: "null"
        auth_key: "<your_own_value>"
        enc_alg: "null"
        enc_key: "<your_own_value>"
        interface: "<your_own_value> (source system.interface.name)"
        ip_version: "4"
        local_gw: "<your_own_value>"
        local_gw6: "<your_own_value>"
        local_spi: "<your_own_value>"
        name: "default_name_13"
        npu_offload: "enable"
        remote_gw: "<your_own_value>"
        remote_gw6: "<your_own_value>"
        remote_spi: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Authors

  • Link Zheng (@chillancezen)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Jie Xue (@JieX19)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)