junipernetworks.junos.junos_ntp_global module – Manage NTP configuration on Junos devices.
Note
This module is part of the junipernetworks.junos collection (version 9.1.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install junipernetworks.junos.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: junipernetworks.junos.junos_ntp_global.
New in junipernetworks.junos 2.6.0
Synopsis
This module manages NTP configuration on devices running Junos.
Requirements
The below requirements are needed on the host that executes this module.
ncclient (>=v0.6.4)
xmltodict (>=0.12.0)
Parameters
Parameter |
Comments |
|---|---|
A dictionary of NTP configuration. |
|
NTP authentication key. |
|
Authentication key type. Choices:
|
|
Authentication key number. |
|
Authentication key value. |
|
Server to query during boot sequence. |
|
Listen to broadcast NTP. Choices:
|
|
Broadcast parameters. |
|
Broadcast or multicast address to use. |
|
Authentication key. |
|
Routing intance name in which interface has address in broadcast subnet. |
|
TTL value to transmit. |
|
NTP version to use. |
|
Set the minpoll and maxpoll interval range. |
|
Listen to multicast NTP address. |
|
NTP Peers. |
|
Key-id to be used while communicating. |
|
Hostname/IP address of the NTP Peer. |
|
Prefer this peer. Choices:
|
|
NTP version to use. |
|
NTP Servers. |
|
Key-id to be used while communicating. |
|
Prefer this peer_serv. Choices:
|
|
Routing instance through which server is reachable. |
|
IP address or hostname of the server. |
|
NTP version to use. |
|
Source-Address parameters. |
|
Routing intance name in which source address is defined. |
|
Use specified address as source address. |
|
Set the maximum threshold(sec) allowed for NTP adjustment. |
|
Select actions for NTP abnormal adjustment. Choices:
|
|
The maximum value(sec) allowed for NTP adjustment. |
|
List of trusted authentication keys. |
|
Trusted-Key number. |
|
This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show system syslog. The state parsed reads the configuration from |
|
The state the configuration should be left in. The states replaced and overridden have identical behaviour for this module. Refer to examples for more details. Choices:
|
Notes
Note
This module requires the netconf system service be enabled on the device being managed.
This module works with connection
netconf.Tested against JunOS v18.4R1
Examples
# Using merged
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
#
# [edit]
# vagrant@vsrx# show routing-instances
# rt1 {
# description rt1;
# }
# rt2 {
- name: Merge provided NTP configuration into running configuration.
junipernetworks.junos.junos_ntp_global:
config:
boot_server: '78.46.194.186'
broadcasts:
- address: '172.16.255.255'
key: '50'
ttl: 200
version: 3
routing_instance_name: 'rt1'
- address: '192.16.255.255'
key: '50'
ttl: 200
version: 3
routing_instance_name: 'rt2'
broadcast_client: true
interval_range: 2
multicast_client: "224.0.0.1"
peers:
- peer: "78.44.194.186"
- peer: "172.44.194.186"
key_id: 10000
prefer: true
version: 3
servers:
- server: "48.46.194.186"
key_id: 34
prefer: true
version: 2
routing_instance: 'rt1'
- server: "48.45.194.186"
key_id: 34
prefer: true
version: 2
source_addresses:
- source_address: "172.45.194.186"
routing_instance: 'rt1'
- source_address: "171.45.194.186"
routing_instance: 'rt2'
threshold:
value: 300
action: "accept"
trusted_keys:
- key_id: 3000
- key_id: 2000
state: merged
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
# "boot_server": "78.46.194.186",
# "broadcast_client": true,
# "broadcasts": [
# {
# "address": "172.16.255.255",
# "key": "50",
# "routing_instance_name": "rt1",
# "ttl": 200,
# "version": 3
# },
# {
# "address": "192.16.255.255",
# "key": "50",
# "routing_instance_name": "rt2",
# "ttl": 200,
# "version": 3
# }
# ],
# "interval_range": 2,
# "multicast_client": "224.0.0.1",
# "peers": [
# {
# "peer": "78.44.194.186"
# },
# {
# "key_id": 10000,
# "peer": "172.44.194.186",
# "prefer": true,
# "version": 3
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ],
# "source_addresses": [
# {
# "routing_instance": "rt1",
# "source_address": "172.45.194.186"
# },
# {
# "routing_instance": "rt2",
# "source_address": "171.45.194.186"
# }
# ],
# "threshold": {
# "action": "accept",
# "value": 300
# },
# "trusted_keys": [
# {"key_id": 2000},
# {"key_id": 3000}
# ]
# },
# "before": {},
# "changed": true,
# "commands": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
# "<nc:ntp><nc:boot-server>78.46.194.186</nc:boot-server><nc:broadcast>"
# "<nc:name>172.16.255.255</nc:name><nc:key>50</nc:key><nc:routing-instance-name>rt1</nc:routing-instance-name>"
# "<nc:ttl>200</nc:ttl><nc:version>3</nc:version></nc:broadcast><nc:broadcast><nc:name>192.16.255.255</nc:name>"
# "<nc:key>50</nc:key><nc:routing-instance-name>rt2</nc:routing-instance-name><nc:ttl>200</nc:ttl>"
# "<nc:version>3</nc:version></nc:broadcast><nc:broadcast-client/><nc:interval-range>2</nc:interval-range>"
# "<nc:multicast-client>224.0.0.1</nc:multicast-client><nc:peer><nc:name>78.44.194.186</nc:name></nc:peer>"
# "<nc:peer><nc:name>172.44.194.186</nc:name><nc:key>10000</nc:key><nc:prefer/><nc:version>3</nc:version>"
# "</nc:peer><nc:server><nc:name>48.46.194.186</nc:name><nc:key>34</nc:key><nc:routing-instance>rt1</nc:routing-instance>"
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:server><nc:name>48.45.194.186</nc:name><nc:key>34</nc:key>"
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:source-address><nc:name>172.45.194.186</nc:name>"
# "<nc:routing-instance>rt1</nc:routing-instance></nc:source-address><nc:source-address>"
# "<nc:name>171.45.194.186</nc:name><nc:routing-instance>rt2</nc:routing-instance></nc:source-address>"
# "<nc:threshold><nc:value>300</nc:value><nc:action>accept</nc:action></nc:threshold>"
# "<nc:trusted-key>3000</nc:trusted-key><nc:trusted-key>2000</nc:trusted-key></nc:ntp></nc:system>"
# ]
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# boot-server 78.46.194.186;
# interval-range 2;
# peer 78.44.194.186;
# peer 172.44.194.186 key 10000 version 3 prefer; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# broadcast 172.16.255.255 routing-instance-name rt1 key 50 version 3 ttl 200;
# broadcast 192.16.255.255 routing-instance-name rt2 key 50 version 3 ttl 200;
# broadcast-client;
# multicast-client 224.0.0.1;
# trusted-key [ 3000 2000 ];
# threshold 300 action accept;
# source-address 172.45.194.186 routing-instance rt1;
# source-address 171.45.194.186 routing-instance rt2;
#
#
# Using Replaced
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# boot-server 78.46.194.186;
# interval-range 2;
# peer 78.44.194.186;
# peer 172.44.194.186 key 10000 version 3 prefer; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# broadcast 172.16.255.255 routing-instance-name rt1 key 50 version 3 ttl 200;
# broadcast 192.16.255.255 routing-instance-name rt2 key 50 version 3 ttl 200;
# broadcast-client;
# multicast-client 224.0.0.1;
# trusted-key [ 3000 2000 ];
# threshold 300 action accept;
# source-address 172.45.194.186 routing-instance rt1;
# source-address 171.45.194.186 routing-instance rt2;
- name: Replaced running ntp global configuration with provided configuration
junipernetworks.junos.junos_ntp_global:
config:
authentication_keys:
- id: 2
algorithm: 'md5'
key: 'asdfghd'
- id: 5
algorithm: 'sha1'
key: 'aasdad'
servers:
- server: "48.46.194.186"
key_id: 34
prefer: true
version: 2
routing_instance: 'rt1'
- server: "48.45.194.186"
key_id: 34
prefer: true
version: 2
state: replaced
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
# "authentication_keys": [
# {
# "algorithm": "md5",
# "id": 2,
# "key": "$9$03aAB1hreW7NbO1rvMLVbgoJ"
# },
# {
# "algorithm": "sha1",
# "id": 5,
# "key": "$9$DXiHmf5F/A0ZUjq.P3n"
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ]
# },
# "before": {
# "boot_server": "78.46.194.186",
# "broadcast_client": true,
# "broadcasts": [
# {
# "address": "172.16.255.255",
# "key": "50",
# "routing_instance_name": "rt1",
# "ttl": 200,
# "version": 3
# },
# {
# "address": "192.16.255.255",
# "key": "50",
# "routing_instance_name": "rt2",
# "ttl": 200,
# "version": 3
# }
# ],
# "interval_range": 2,
# "multicast_client": "224.0.0.1",
# "peers": [
# {
# "peer": "78.44.194.186"
# },
# {
# "key_id": 10000,
# "peer": "172.44.194.186",
# "prefer": true,
# "version": 3
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ],
# "source_addresses": [
# {
# "routing_instance": "rt1",
# "source_address": "172.45.194.186"
# },
# {
# "routing_instance": "rt2",
# "source_address": "171.45.194.186"
# }
# ],
# "threshold": {
# "action": "accept",
# "value": 300
# },
# "trusted_keys": [
# {"key_id": 2000},
# {"key_id": 3000}
# ]
# },
# "changed": true,
# "commands": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# "<nc:ntp delete="delete"/><nc:ntp><nc:authentication-key><nc:name>2</nc:name><nc:type>md5</nc:type>
# "<nc:value>asdfghd</nc:value></nc:authentication-key><nc:authentication-key><nc:name>5</nc:name>
# "<nc:type>sha1</nc:type><nc:value>aasdad</nc:value></nc:authentication-key><nc:server>
# "<nc:name>48.46.194.186</nc:name><nc:key>34</nc:key><nc:routing-instance>rt1</nc:routing-instance>
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:server><nc:name>48.45.194.186</nc:name>
# "<nc:key>34</nc:key><nc:prefer/><nc:version>2</nc:version></nc:server></nc:ntp></nc:system>"
# ]
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# authentication-key 2 type md5 value "$9$03aAB1hreW7NbO1rvMLVbgoJ"; ## SECRET-DATA
# authentication-key 5 type sha1 value "$9$DXiHmf5F/A0ZUjq.P3n"; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# Using overridden
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# boot-server 78.46.194.186;
# interval-range 2;
# peer 78.44.194.186;
# peer 172.44.194.186 key 10000 version 3 prefer; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# broadcast 172.16.255.255 routing-instance-name rt1 key 50 version 3 ttl 200;
# broadcast 192.16.255.255 routing-instance-name rt2 key 50 version 3 ttl 200;
# broadcast-client;
# multicast-client 224.0.0.1;
# trusted-key [ 3000 2000 ];
# threshold 300 action accept;
# source-address 172.45.194.186 routing-instance rt1;
# source-address 171.45.194.186 routing-instance rt2;
- name: Override running ntp global configuration with provided configuration
junipernetworks.junos.junos_ntp_global:
config:
authentication_keys:
- id: 2
algorithm: 'md5'
key: 'asdfghd'
- id: 5
algorithm: 'sha1'
key: 'aasdad'
servers:
- server: "48.46.194.186"
key_id: 34
prefer: true
version: 2
routing_instance: 'rt1'
- server: "48.45.194.186"
key_id: 34
prefer: true
version: 2
state: overridden
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
# "authentication_keys": [
# {
# "algorithm": "md5",
# "id": 2,
# "key": "$9$03aAB1hreW7NbO1rvMLVbgoJ"
# },
# {
# "algorithm": "sha1",
# "id": 5,
# "key": "$9$DXiHmf5F/A0ZUjq.P3n"
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ]
# },
# "before": {
# "boot_server": "78.46.194.186",
# "broadcast_client": true,
# "broadcasts": [
# {
# "address": "172.16.255.255",
# "key": "50",
# "routing_instance_name": "rt1",
# "ttl": 200,
# "version": 3
# },
# {
# "address": "192.16.255.255",
# "key": "50",
# "routing_instance_name": "rt2",
# "ttl": 200,
# "version": 3
# }
# ],
# "interval_range": 2,
# "multicast_client": "224.0.0.1",
# "peers": [
# {
# "peer": "78.44.194.186"
# },
# {
# "key_id": 10000,
# "peer": "172.44.194.186",
# "prefer": true,
# "version": 3
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ],
# "source_addresses": [
# {
# "routing_instance": "rt1",
# "source_address": "172.45.194.186"
# },
# {
# "routing_instance": "rt2",
# "source_address": "171.45.194.186"
# }
# ],
# "threshold": {
# "action": "accept",
# "value": 300
# },
# "trusted_keys": [
# {"key_id": 2000},
# {"key_id": 3000}
# ]
# },
# "changed": true,
# "commands": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# "<nc:ntp delete="delete"/><nc:ntp><nc:authentication-key><nc:name>2</nc:name><nc:type>md5</nc:type>
# "<nc:value>asdfghd</nc:value></nc:authentication-key><nc:authentication-key><nc:name>5</nc:name>
# "<nc:type>sha1</nc:type><nc:value>aasdad</nc:value></nc:authentication-key><nc:server>
# "<nc:name>48.46.194.186</nc:name><nc:key>34</nc:key><nc:routing-instance>rt1</nc:routing-instance>
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:server><nc:name>48.45.194.186</nc:name>
# "<nc:key>34</nc:key><nc:prefer/><nc:version>2</nc:version></nc:server></nc:ntp></nc:system>"
# ]
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# authentication-key 2 type md5 value "$9$03aAB1hreW7NbO1rvMLVbgoJ"; ## SECRET-DATA
# authentication-key 5 type sha1 value "$9$DXiHmf5F/A0ZUjq.P3n"; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
#
# Using deleted
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# authentication-key 2 type md5 value "$9$03aAB1hreW7NbO1rvMLVbgoJ"; ## SECRET-DATA
# authentication-key 5 type sha1 value "$9$DXiHmf5F/A0ZUjq.P3n"; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
#
- name: Delete running NTP global configuration
junipernetworks.junos.junos_ntp_global:
config:
state: deleted
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {},
# "before": {
# "authentication_keys": [
# {
# "algorithm": "md5",
# "id": 2,
# "key": "$9$03aAB1hreW7NbO1rvMLVbgoJ"
# },
# {
# "algorithm": "sha1",
# "id": 5,
# "key": "$9$DXiHmf5F/A0ZUjq.P3n"
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ]
# },
# "changed": true,
# "commands": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
# "<nc:ntp delete="delete"/></nc:system>"
# ]
# After state
# -----------
#
# vagrant@vsrx# show system ntp
#
# [edit]
# Using gathered
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# boot-server 78.46.194.186;
# interval-range 2;
# peer 78.44.194.186;
# peer 172.44.194.186 key 10000 version 3 prefer; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# broadcast 172.16.255.255 routing-instance-name rt1 key 50 version 3 ttl 200;
# broadcast 192.16.255.255 routing-instance-name rt2 key 50 version 3 ttl 200;
# broadcast-client;
# multicast-client 224.0.0.1;
# trusted-key [ 3000 2000 ];
# threshold 300 action accept;
# source-address 172.45.194.186 routing-instance rt1;
# source-address 171.45.194.186 routing-instance rt2;
- name: Gather running NTP global configuration
junipernetworks.junos.junos_ntp_global:
state: gathered
#
# -------------------------
# Module Execution Result
# -------------------------
# "gathered": {
# "boot_server": "78.46.194.186",
# "broadcast_client": true,
# "broadcasts": [
# {
# "address": "172.16.255.255",
# "key": "50",
# "routing_instance_name": "rt1",
# "ttl": 200,
# "version": 3
# },
# {
# "address": "192.16.255.255",
# "key": "50",
# "routing_instance_name": "rt2",
# "ttl": 200,
# "version": 3
# }
# ],
# "interval_range": 2,
# "multicast_client": "224.0.0.1",
# "peers": [
# {
# "peer": "78.44.194.186"
# },
# {
# "key_id": 10000,
# "peer": "172.44.194.186",
# "prefer": true,
# "version": 3
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ],
# "source_addresses": [
# {
# "routing_instance": "rt1",
# "source_address": "172.45.194.186"
# },
# {
# "routing_instance": "rt2",
# "source_address": "171.45.194.186"
# }
# ],
# "threshold": {
# "action": "accept",
# "value": 300
# },
# "trusted_keys": [
# {"key_id": 2000},
# {"key_id": 3000}
# ]
# },
# "changed": false,
# Using rendered
#
# Before state
# ------------
#
- name: Render xml for provided facts.
junipernetworks.junos.junos_ntp_global:
config:
boot_server: '78.46.194.186'
broadcasts:
- address: '172.16.255.255'
key: '50'
ttl: 200
version: 3
routing_instance_name: 'rt1'
- address: '192.16.255.255'
key: '50'
ttl: 200
version: 3
routing_instance_name: 'rt2'
broadcast_client: true
interval_range: 2
multicast_client: "224.0.0.1"
peers:
- peer: "78.44.194.186"
- peer: "172.44.194.186"
key_id: 10000
prefer: true
version: 3
servers:
- server: "48.46.194.186"
key_id: 34
prefer: true
version: 2
routing_instance: 'rt1'
- server: "48.45.194.186"
key_id: 34
prefer: true
version: 2
source_addresses:
- source_address: "172.45.194.186"
routing_instance: 'rt1'
- source_address: "171.45.194.186"
routing_instance: 'rt2'
threshold:
value: 300
action: "accept"
trusted_keys:
- 3000
- 2000
state: rendered
#
# -------------------------
# Module Execution Result
# -------------------------
# "rendered": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
# "<nc:ntp><nc:boot-server>78.46.194.186</nc:boot-server><nc:broadcast><nc:name>172.16.255.255</nc:name>"
# "<nc:key>50</nc:key><nc:routing-instance-name>rt1</nc:routing-instance-name><nc:ttl>200</nc:ttl>"
# "<nc:version>3</nc:version></nc:broadcast><nc:broadcast><nc:name>192.16.255.255</nc:name>"
# "<nc:key>50</nc:key><nc:routing-instance-name>rt2</nc:routing-instance-name>"
# "<nc:ttl>200</nc:ttl><nc:version>3</nc:version></nc:broadcast><nc:broadcast-client/>"
# "<nc:interval-range>2</nc:interval-range><nc:multicast-client>224.0.0.1</nc:multicast-client><nc:peer>"
# "<nc:name>78.44.194.186</nc:name></nc:peer><nc:peer><nc:name>172.44.194.186</nc:name>"
# "<nc:key>10000</nc:key><nc:prefer/><nc:version>3</nc:version></nc:peer><nc:server>"
# "<nc:name>48.46.194.186</nc:name><nc:key>34</nc:key><nc:routing-instance>rt1</nc:routing-instance>"
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:server><nc:name>48.45.194.186</nc:name>"
# "<nc:key>34</nc:key><nc:prefer/><nc:version>2</nc:version></nc:server><nc:source-address>"
# "<nc:name>172.45.194.186</nc:name><nc:routing-instance>rt1</nc:routing-instance></nc:source-address>"
# "<nc:source-address><nc:name>171.45.194.186</nc:name><nc:routing-instance>rt2</nc:routing-instance>"
# "</nc:source-address><nc:threshold><nc:value>300</nc:value><nc:action>accept</nc:action></nc:threshold>"
# "<nc:trusted-key>3000</nc:trusted-key><nc:trusted-key>2000</nc:trusted-key></nc:ntp></nc:system>"
# ]
#
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <version>18.4R1-S2.4</version>
# <system xmlns="http://yang.juniper.net/junos-es/conf/system">
# <ntp>
# <authentication-key>
# <name>2</name>
# <type>md5</type>
# <value>$9$GxDjqfT3CA0UjfzF6u0RhS</value>
# </authentication-key>
# <authentication-key>
# <name>5</name>
# <type>sha1</type>
# <value>$9$ZsUDk.mT3/toJGiHqQz</value>
# </authentication-key>
# </ntp>
# </system>
# </configuration>
# </rpc-reply>
#
- name: Parse NTP global running config
junipernetworks.junos.junos_ntp_global:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": {
# "authentication_keys": [
# {
# "algorithm": "md5",
# "id": 2,
# "key": "$9$GxDjqfT3CA0UjfzF6u0RhS"
# },
# {
# "algorithm": "sha1",
# "id": 5,
# "key": "$9$ZsUDk.mT3/toJGiHqQz"
# }
# ]
# }
#
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The resulting configuration model invocation. Returned: when changed Sample: |
|
The configuration prior to the model invocation. Returned: always Sample: |
|
The set of commands pushed to the remote device. Returned: always Sample: |