junipernetworks.junos.junos_security_policies module – Create and manage security policies on Juniper JUNOS devices

Note

This module is part of the junipernetworks.junos collection (version 3.0.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_security_policies.

New in version 2.9.0: of junipernetworks.junos

Synopsis

  • This module provides declarative creation and management of security policies on Juniper JUNOS devices

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

  • xmltodict (>=0.12.0)

Parameters

Parameter

Comments

config

dictionary

A dictionary of security policies

from_zones

list / elements=dictionary

List of security zones from which the traffic originates from

name

string

The name of the security zone from which the traffic originates from

to_zones

list / elements=dictionary

List of destination security zones of the traffic

name

string

The name of the destination security zone of the traffic

policies

list / elements=dictionary

List of policies defined for the associated category

description

string

Description of the security policy

match

dictionary

Configure security policy match criteria

application

dictionary

Specify the IP or remote procedure call (RPC) application or set of applications to be used as match criteria

any

boolean

Match any predefined or custom applications or application sets

Choices:

  • no

  • yes

names

list / elements=string

Name of the predefined or custom application or application set used as match criteria

destination_address

dictionary

Define the matching criteria You can specify one or more IP addresses, address sets, or wildcard addresses

addresses

list / elements=string

IP address, IP address set, or address book entry, or wildcard address (represented as ABCD/wildcard_mask)

any

boolean

Any IPv4 or IPv6 address

Choices:

  • no

  • yes

any_ipv4

boolean

Any IPv4 address

Choices:

  • no

  • yes

any_ipv6

boolean

Any IPv6 address

Choices:

  • no

  • yes

destination_address_excluded

boolean

Exclude destination addresses

Choices:

  • no

  • yes

dynamic_application

dictionary

Specify the dynamic applications or dynamic application groups used as match criteria within a security policy

any

boolean

Configuring the dynamic application as any installs the policy with the application as a wildcard (default)

Choices:

  • no

  • yes

names

list / elements=string

Specify dynamic applications or dynamic application groups

none

boolean

Configuring the dynamic application as none ignores classification results from AppID and does not use the dynamic application in security policy lookups

Choices:

  • no

  • yes

from_zone

dictionary

Identify a single source zone or multiple source zones to be used as a match criteria for a policy

any

boolean

Match any zone

Choices:

  • no

  • yes

junos_host

boolean

junos-host

Choices:

  • no

  • yes

names

list / elements=string

Name of single or multiple source zone

source_address

dictionary

Define the matching criteria You can specify one or more IP addresses, address sets, or wildcard addresses

addresses

list / elements=string

IP address, IP address set, or address book entry, or wildcard address (represented as ABCD/wildcard_mask)

any

boolean

Any IPv4 or IPv6 address

Choices:

  • no

  • yes

any_ipv4

boolean

Any IPv4 address

Choices:

  • no

  • yes

any_ipv6

boolean

Any IPv6 address

Choices:

  • no

  • yes

source_address_excluded

boolean

Exclude source addresses

Choices:

  • no

  • yes

source_end_user_profile

string

Source end user profile name

source_identity

dictionary

Identifies users and roles to be used as match criteria for a policy

any

boolean

Any user or role, as well as the keywords authenticated_user, unauthenticated_user, and unknown_user

Choices:

  • no

  • yes

authenticated_user

boolean

All users and roles that have been authenticated

Choices:

  • no

  • yes

names

list / elements=string

A list of specific users and roles

unauthenticated_user

boolean

Any user or role that does not have an IP_address mapped to authentication sources and the authentication source is up and running

Choices:

  • no

  • yes

unknown_user

boolean

Any user or role that does not have an IP address mapped to authentication sources, because the authentication source is disconnected from the SRX Series device

Choices:

  • no

  • yes

to_zone

dictionary

Identify a single destination zone or multiple destination zones to be used as a match criteria for a policy

any

boolean

Match any zone

Choices:

  • no

  • yes

junos_host

boolean

junos-host

Choices:

  • no

  • yes

names

list / elements=string

Name of single or multiple destination zone

url_category

dictionary

URL category

any

boolean

Apply to any url category

Choices:

  • no

  • yes

names

list / elements=string

Names of url category to match

none

boolean

Do not apply to the url category

Choices:

  • no

  • yes

name

string

Name of the policy

scheduler_name

string

Name of the scheduler to run this policy

then

dictionary

Specify the policy action to be performed when packets match the defined criteria

count

boolean

Enable a count, in bytes or kilobytes, of all network traffic the policy allows to pass through the device in both directions; the originating traffic from the client to the server (from the from_zone to the to_zone), and the return traffic from the server to the originating client

Choices:

  • no

  • yes

deny

boolean

Block the service at the firewall The device drops the packets

Choices:

  • no

  • yes

log

dictionary

Log traffic information for a specific policy Traffic information is logged when a session begins (session_init) or closes (session_close)

session_close

boolean

Enable logging on session close time

Choices:

  • no

  • yes

session_init

boolean

Enable logging on session initialization time

Choices:

  • no

  • yes

permit

dictionary

Block the service at the firewall The device drops the packets

application_services

dictionary

Enable application services within a security policy

advanced_anti_malware_policy

string

Specify advanced_anti_malware policy name

application_firewalls

list / elements=dictionary

Specify the rule sets configured as part of application firewall to be applied to the permitted traffic

rule_set

string

name of rule set to use

application_traffic_control_rule_set

string

Specify the rule set configured as part of AppQoS, application_aware quality of service, to be applied to the permitted traffic

gprs_gtp_profile

string

Specify GPRS tunneling protocol profile name

gprs_sctp_profile

string

Specify GPRS stream control protocol profile name

icap_redirect

string

Specify icap redirect profile name

idp

boolean

Intrusion Detection and Prevention (IDP)

Choices:

  • no

  • yes

idp_policy

string

Specify IDP policy name

packet_capture

boolean

Option to enable or disable packet capture

Choices:

  • no

  • yes

redirect_wx

boolean

Specify the WX redirection needed for the packets that arrive from the LAN

Choices:

  • no

  • yes

reverse_redirect_wx

boolean

Specify the WX redirection needed for the reverse flow of the packets that arrive from the WAN

Choices:

  • no

  • yes

security_intelligence

dictionary

Specify the security intelligence feed post action

add_destination_identity_to_feed

string

Add destination user identity to the security feed

add_destination_ip_to_feed

string

Add the destination IP address to the security feed

add_source_identity_to_feed

string

Add source user identity to the security feed

add_source_ip_to_feed

string

Add the source IP address to the security feed

security_intelligence_policy

string

Specify security_intelligence policy name

ssl_proxy

dictionary

You can apply a redirect SSL proxy profile when a policy blocks HTTPS traffic with a reject action

enable

boolean

Enable SSL proxy

Choices:

  • no

  • yes

profile_name

string

Name of SSL proxy profile

uac_policy

dictionary

Enable Unified Access Control (UAC) for the security policy

captive_portal

string

Specify the preconfigured security policy for captive portal on the Junos OS Enforcer to enable the captive portal feature

enable

boolean

Enable Unified Access Control (UAC)

Choices:

  • no

  • yes

utm_policy

string

Specify UTM policy name

destination_address

string

Specify whether the traffic permitted by the security policy is limited to packets where the destination IP address has been translated by means of a destination NAT rule or to packets where the destination IP address has not been translated

Choices:

  • drop-translated

  • drop-untranslated

firewall_authentication

dictionary

Configure firewall authentication methods

pass_through

dictionary

Configure pass-through firewall user authentication

access_profile

string

Specify the name of the access profile

auth_only_browser

boolean

Configure firewall authentication to ignore non-browser HTTP/HTTPS traffic

Choices:

  • no

  • yes

auth_user_agent

string

Specify a user-agent value to be used to verify that the user’s browser traffic is HTTP/HTTPS traffic

client_match

string

Specify the name of the users or user groups in a profile who are allowed access by this policy

ssl_termination_profile

string

Specify the SSL termination profile used for SSL offloading

web_redirect

boolean

Enable redirecting an HTTP request to the device and redirecting the client system to a webpage for authentication

Choices:

  • no

  • yes

web_redirect_to_https

boolean

Redirect unauthenticated HTTP requests to the internal HTTPS Web server of the device

Choices:

  • no

  • yes

push_to_identity_management

boolean

enables pushing to identity management devices

Choices:

  • no

  • yes

user_firewall

dictionary

Configure user role firewall authentication, and map the source IP address to the username and its associated roles (groups)

access_profile

string

Specify the name of the access profile to be used for authentication

auth_only_browser

boolean

Configure firewall authentication to ignore non-browser HTTP/HTTPS traffic

Choices:

  • no

  • yes

auth_user_agent

string

Specify a user-agent value to be used to verify that the user’s browser traffic is HTTP/HTTPS traffic

domain

string

Specify the name of the domain where firewall authentication occurs in the event that the Windows Management Instrumentation client (WMIC) is not available to get IP_to_user mapping for the integrated user firewall feature

ssl_termination_profile

string

For HTTPS traffic, specify the name of the SSL termination profile used for SSL offloading

web_redirect

boolean

Enable webpage redirection

Choices:

  • no

  • yes

web_redirect_to_https

boolean

Enable redirection to HTTPS

Choices:

  • no

  • yes

web_authentication

list / elements=string

Specify that the policy allows access to users or user groups who have previously been authenticated by Web authentication

tcp_options

dictionary

Specify the TCP options for each policy You can configure sync and sequence checks for each policy based on your requirements, and, because each policy has two directions, you can configure a TCP MSS value for both directions or for just one direction

initial_tcp_mss

integer

Configure the TCP maximum segment size (MSS) for packets that arrive at the ingress interface (initial direction), match a specific policy, and for which a session is created

reverse_tcp_mss

integer

Configure the TCP maximum segment size (MSS) for packets that match a specific policy and travel in the reverse direction of a session

sequence_check_required

boolean

Enable sequence check per policy The sequence_check_required value overrides the global value no_sequence_check

Choices:

  • no

  • yes

syn_check_required

boolean

Enable sync check per policy The syn_check_required value overrides the global value no_syn_check

Choices:

  • no

  • yes

window_scale

boolean

Enable window_scale per policy

Choices:

  • no

  • yes

tunnel

dictionary

Encapsulate outgoing IP packets and decapsulate incoming IP packets

ipsec_vpn

string

name of the ipsec policy

pair_policy

string

name of the pair policy

reject

dictionary

Block the service at the firewall The device drops the packet and sends a TCP reset (RST) segment to the source host for TCP traffic and an ICMP “destination unreachable, port unreachable” message (type 3, code 3) for UDP traffic

enable

boolean

Enable rejection of packets based on match criteria

Choices:

  • no

  • yes

profile

string

You can chose to provide a notification to the clients or redirect client request to an informative Web page when a policy blocks HTTP or HTTPS traffic with a deny or reject action

ssl_proxy

dictionary

You can apply a redirect SSL proxy profile when a policy blocks HTTPS traffic with a reject action When you apply am SSL proxy profile, SSL proxy decrypts the traffic and application identification functionality identifies the application

enable

boolean

Enable SSL proxy

Choices:

  • no

  • yes

profile_name

string

Name of SSL proxy profile

global

dictionary

List of global security policies

policies

list / elements=dictionary

List of policies defined for the associated category

description

string

Description of the security policy

match

dictionary

Configure security policy match criteria

application

dictionary

Specify the IP or remote procedure call (RPC) application or set of applications to be used as match criteria

any

boolean

Match any predefined or custom applications or application sets

Choices:

  • no

  • yes

names

list / elements=string

Name of the predefined or custom application or application set used as match criteria

destination_address

dictionary

Define the matching criteria You can specify one or more IP addresses, address sets, or wildcard addresses

addresses

list / elements=string

IP address, IP address set, or address book entry, or wildcard address (represented as ABCD/wildcard_mask)

any

boolean

Any IPv4 or IPv6 address

Choices:

  • no

  • yes

any_ipv4

boolean

Any IPv4 address

Choices:

  • no

  • yes

any_ipv6

boolean

Any IPv6 address

Choices:

  • no

  • yes

destination_address_excluded

boolean

Exclude destination addresses

Choices:

  • no

  • yes

dynamic_application

dictionary

Specify the dynamic applications or dynamic application groups used as match criteria within a security policy

any

boolean

Configuring the dynamic application as any installs the policy with the application as a wildcard (default)

Choices:

  • no

  • yes

names

list / elements=string

Specify dynamic applications or dynamic application groups

none

boolean

Configuring the dynamic application as none ignores classification results from AppID and does not use the dynamic application in security policy lookups

Choices:

  • no

  • yes

from_zone

dictionary

Identify a single source zone or multiple source zones to be used as a match criteria for a policy

any

boolean

Match any zone

Choices:

  • no

  • yes

junos_host

boolean

junos-host

Choices:

  • no

  • yes

names

list / elements=string

Name of single or multiple source zone

source_address

dictionary

Define the matching criteria You can specify one or more IP addresses, address sets, or wildcard addresses

addresses

list / elements=string

IP address, IP address set, or address book entry, or wildcard address (represented as ABCD/wildcard_mask)

any

boolean

Any IPv4 or IPv6 address

Choices:

  • no

  • yes

any_ipv4

boolean

Any IPv4 address

Choices:

  • no

  • yes

any_ipv6

boolean

Any IPv6 address

Choices:

  • no

  • yes

source_address_excluded

boolean

Exclude source addresses

Choices:

  • no

  • yes

source_end_user_profile

string

Source end user profile name

source_identity

dictionary

Identifies users and roles to be used as match criteria for a policy

any

boolean

Any user or role, as well as the keywords authenticated_user, unauthenticated_user, and unknown_user

Choices:

  • no

  • yes

authenticated_user

boolean

All users and roles that have been authenticated

Choices:

  • no

  • yes

names

list / elements=string

A list of specific users and roles

unauthenticated_user

boolean

Any user or role that does not have an IP_address mapped to authentication sources and the authentication source is up and running

Choices:

  • no

  • yes

unknown_user

boolean

Any user or role that does not have an IP address mapped to authentication sources, because the authentication source is disconnected from the SRX Series device

Choices:

  • no

  • yes

to_zone

dictionary

Identify a single destination zone or multiple destination zones to be used as a match criteria for a policy

any

boolean

Match any zone

Choices:

  • no

  • yes

junos_host

boolean

junos-host

Choices:

  • no

  • yes

names

list / elements=string

Name of single or multiple destination zone

url_category

dictionary

URL category

any

boolean

Apply to any url category

Choices:

  • no

  • yes

names

list / elements=string

Names of url category to match

none

boolean

Do not apply to the url category

Choices:

  • no

  • yes

name

string

Name of the policy

scheduler_name

string

Name of the scheduler to run this policy

then

dictionary

Specify the policy action to be performed when packets match the defined criteria

count

boolean

Enable a count, in bytes or kilobytes, of all network traffic the policy allows to pass through the device in both directions; the originating traffic from the client to the server (from the from_zone to the to_zone), and the return traffic from the server to the originating client

Choices:

  • no

  • yes

deny

boolean

Block the service at the firewall The device drops the packets

Choices:

  • no

  • yes

log

dictionary

Log traffic information for a specific policy Traffic information is logged when a session begins (session_init) or closes (session_close)

session_close

boolean

Enable logging on session close time

Choices:

  • no

  • yes

session_init

boolean

Enable logging on session initialization time

Choices:

  • no

  • yes

permit

dictionary

Block the service at the firewall The device drops the packets

application_services

dictionary

Enable application services within a security policy

advanced_anti_malware_policy

string

Specify advanced_anti_malware policy name

application_firewalls

list / elements=dictionary

Specify the rule sets configured as part of application firewall to be applied to the permitted traffic

rule_set

string

name of rule set to use

application_traffic_control_rule_set

string

Specify the rule set configured as part of AppQoS, application_aware quality of service, to be applied to the permitted traffic

gprs_gtp_profile

string

Specify GPRS tunneling protocol profile name

gprs_sctp_profile

string

Specify GPRS stream control protocol profile name

icap_redirect

string

Specify icap redirect profile name

idp

boolean

Intrusion Detection and Prevention (IDP)

Choices:

  • no

  • yes

idp_policy

string

Specify IDP policy name

packet_capture

boolean

Option to enable or disable packet capture

Choices:

  • no

  • yes

redirect_wx

boolean

Specify the WX redirection needed for the packets that arrive from the LAN

Choices:

  • no

  • yes

reverse_redirect_wx

boolean

Specify the WX redirection needed for the reverse flow of the packets that arrive from the WAN

Choices:

  • no

  • yes

security_intelligence

dictionary

Specify the security intelligence feed post action

add_destination_identity_to_feed

string

Add destination user identity to the security feed

add_destination_ip_to_feed

string

Add the destination IP address to the security feed

add_source_identity_to_feed

string

Add source user identity to the security feed

add_source_ip_to_feed

string

Add the source IP address to the security feed

security_intelligence_policy

string

Specify security_intelligence policy name

ssl_proxy

dictionary

You can apply a redirect SSL proxy profile when a policy blocks HTTPS traffic with a reject action

enable

boolean

Enable SSL proxy

Choices:

  • no

  • yes

profile_name

string

Name of SSL proxy profile

uac_policy

dictionary

Enable Unified Access Control (UAC) for the security policy

captive_portal

string

Specify the preconfigured security policy for captive portal on the Junos OS Enforcer to enable the captive portal feature

enable

boolean

Enable Unified Access Control (UAC)

Choices:

  • no

  • yes

utm_policy

string

Specify UTM policy name

destination_address

string

Specify whether the traffic permitted by the security policy is limited to packets where the destination IP address has been translated by means of a destination NAT rule or to packets where the destination IP address has not been translated

Choices:

  • drop-translated

  • drop-untranslated

firewall_authentication

dictionary

Configure firewall authentication methods

pass_through

dictionary

Configure pass-through firewall user authentication

access_profile

string

Specify the name of the access profile

auth_only_browser

boolean

Configure firewall authentication to ignore non-browser HTTP/HTTPS traffic

Choices:

  • no

  • yes

auth_user_agent

string

Specify a user-agent value to be used to verify that the user’s browser traffic is HTTP/HTTPS traffic

client_match

string

Specify the name of the users or user groups in a profile who are allowed access by this policy

ssl_termination_profile

string

Specify the SSL termination profile used for SSL offloading

web_redirect

boolean

Enable redirecting an HTTP request to the device and redirecting the client system to a webpage for authentication

Choices:

  • no

  • yes

web_redirect_to_https

boolean

Redirect unauthenticated HTTP requests to the internal HTTPS Web server of the device

Choices:

  • no

  • yes

push_to_identity_management

boolean

enables pushing to identity management devices

Choices:

  • no

  • yes

user_firewall

dictionary

Configure user role firewall authentication, and map the source IP address to the username and its associated roles (groups)

access_profile

string

Specify the name of the access profile to be used for authentication

auth_only_browser

boolean

Configure firewall authentication to ignore non-browser HTTP/HTTPS traffic

Choices:

  • no

  • yes

auth_user_agent

string

Specify a user-agent value to be used to verify that the user’s browser traffic is HTTP/HTTPS traffic

domain

string

Specify the name of the domain where firewall authentication occurs in the event that the Windows Management Instrumentation client (WMIC) is not available to get IP_to_user mapping for the integrated user firewall feature

ssl_termination_profile

string

For HTTPS traffic, specify the name of the SSL termination profile used for SSL offloading

web_redirect

boolean

Enable webpage redirection

Choices:

  • no

  • yes

web_redirect_to_https

boolean

Enable redirection to HTTPS

Choices:

  • no

  • yes

web_authentication

list / elements=string

Specify that the policy allows access to users or user groups who have previously been authenticated by Web authentication

tcp_options

dictionary

Specify the TCP options for each policy You can configure sync and sequence checks for each policy based on your requirements, and, because each policy has two directions, you can configure a TCP MSS value for both directions or for just one direction

initial_tcp_mss

integer

Configure the TCP maximum segment size (MSS) for packets that arrive at the ingress interface (initial direction), match a specific policy, and for which a session is created

reverse_tcp_mss

integer

Configure the TCP maximum segment size (MSS) for packets that match a specific policy and travel in the reverse direction of a session

sequence_check_required

boolean

Enable sequence check per policy The sequence_check_required value overrides the global value no_sequence_check

Choices:

  • no

  • yes

syn_check_required

boolean

Enable sync check per policy The syn_check_required value overrides the global value no_syn_check

Choices:

  • no

  • yes

window_scale

boolean

Enable window_scale per policy

Choices:

  • no

  • yes

tunnel

dictionary

Encapsulate outgoing IP packets and decapsulate incoming IP packets

ipsec_vpn

string

name of the ipsec policy

pair_policy

string

name of the pair policy

reject

dictionary

Block the service at the firewall The device drops the packet and sends a TCP reset (RST) segment to the source host for TCP traffic and an ICMP “destination unreachable, port unreachable” message (type 3, code 3) for UDP traffic

enable

boolean

Enable rejection of packets based on match criteria

Choices:

  • no

  • yes

profile

string

You can chose to provide a notification to the clients or redirect client request to an informative Web page when a policy blocks HTTP or HTTPS traffic with a deny or reject action

ssl_proxy

dictionary

You can apply a redirect SSL proxy profile when a policy blocks HTTPS traffic with a reject action When you apply am SSL proxy profile, SSL proxy decrypts the traffic and application identification functionality identifies the application

enable

boolean

Enable SSL proxy

Choices:

  • no

  • yes

profile_name

string

Name of SSL proxy profile

running_config

string

This option is used only with state parsed

The value of this option should be the output received from the JunOS device by executing the command show configuration security policies

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result

state

string

The state the configuration should be left in

The states rendered, gathered and parsed does not perform any change on the device

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result For state rendered active connection to remote host is not required

The state replaced will replace the running configuration with the provided configuration

The state replaced and state overridden have the same behaviour

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result The value of running_config option should be the same format as the output of command show security policies detail executed on device For state parsed active connection to remote host is not required

Choices:

  • merged ← (default)

  • replaced

  • overridden

  • deleted

  • rendered

  • gathered

  • parsed

Notes

Note

  • This module requires the netconf system service be enabled on the device being managed

  • This module works with connection netconf

  • See the Junos OS Platform Options

  • Tested against JunOS v18.4R1

Examples

# Using merged
#
# Before state
# ------------
#
# [email protected]> show security policies
# Default policy: deny-all
# Pre ID default policy: permit-all
# Global policies:
# Policy: test_glob, State: enabled, Index: 4, Scope Policy: 0, Sequence number: 1
#   From zones: any
#     To zones: any
#     Source addresses: any-ipv4
#     Destination addresses: any-ipv4
#     Applications: any
#     Action: deny
#
# [email protected]> show security zones
#
# Security zone: one
# Send reset for non-SYN session TCP packets: Off
# Policy configurable: Yes
# Interfaces bound: 1
# Interfaces:
# ge-0/0/0.0
#
# Security zone: three
# Send reset for non-SYN session TCP packets: Off
# Policy configurable: Yes
# Interfaces bound: 1
# Interfaces:
# ge-0/0/2.0
#
# Security zone: two
# Send reset for non-SYN session TCP packets: Off
# Policy configurable: Yes
# Interfaces bound: 1
# Interfaces:
# ge-0/0/1.0
#
# Security zone: junos-host
# Send reset for non-SYN session TCP packets: Off
# Policy configurable: Yes
# Interfaces bound: 0
# Interfaces:
#
- junipernetworks.junos.junos_security_policies:
    config:
      from_zones:
        - name: one
          to_zones:
            - name: two
              policies:
                - match:
                    application:
                      names:
                        - junos-dhcp-relay
                        - junos-finger
                    destination_address:
                      addresses:
                        - a2
                        - a4
                    destination_address_excluded: true
                    dynamic_application:
                      names:
                        - any
                    source_address:
                      addresses:
                        - a1
                        - a3
                    source_address_excluded: true
                    source_end_user_profile: test_end_user_profile
                    source_identity:
                      unknown_user: true
                    url_category:
                      names:
                        - Enhanced_Web_Chat
                  name: test_policy_1
                  then:
                    count: true
                    deny: true
                    log: session-close
                - match:
                    application:
                      any: true
                    destination_address:
                      any_ipv6: true
                    source_address:
                      addresses:
                        - a1
                  name: test_policy_2
                  then:
                    reject:
                      enable: true
                      profile: test_dyn_app
                      ssl_proxy:
                        enable: true
                        profile_name: SECURITY-SSL-PROXY
            - name: three
              policies:
                - match:
                    application:
                      any: true
                    destination_address:
                      addresses:
                        - a2
                    source_address:
                      addresses:
                        - a1
                  name: test_policy_3
                  then:
                    permit:
                      application_services:
                        application_traffic_control_rule_set: test_traffic_control
                        gprs_gtp_profile: gtp1
                        icap_redirect: test_icap
                        reverse_redirect_wx: 'True'
                        uac_policy:
                          enable: true
                      firewall_authentication:
                        push_to_identity_management: true
                        web_authentication:
                          - FWClient1
                      tcp_options:
                        initial_tcp_mss: 64
                        window_scale: true
      global:
        policies:
          - match:
              application:
                any: true
              destination_address:
                any_ipv6: true
              source_address:
                any_ipv6: true
            name: test_glob_1
            then:
              deny: true
          - match:
              application:
                any: true
              destination_address:
                any_ipv6: true
              source_address:
                any_ipv6: true
            name: test_glob_2
            then:
              deny: true
    state: merged
#
# -------------------------
# Module Execution Result
# -------------------------
#   "after": {
#     "from_zones": [
#       {
#         "name": "one",
#         "to_zones": [
#           {
#             "name": "two",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "names": [
#                       "junos-dhcp-relay",
#                       "junos-finger"
#                     ]
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2",
#                       "a4"
#                     ]
#                   },
#                   "destination_address_excluded": true,
#                   "dynamic_application": {
#                     "names": [
#                       "any"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1",
#                       "a3"
#                     ]
#                   },
#                   "source_address_excluded": true,
#                   "source_end_user_profile": "test_end_user_profile",
#                   "source_identity": {
#                     "unknown_user": true
#                   },
#                   "url_category": {
#                     "names": [
#                       "Enhanced_Web_Chat"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_1",
#                 "then": {
#                   "count": true,
#                   "deny": true,
#                   "log": "session-close"
#                 }
#               },
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "any_ipv6": true
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_2",
#                 "then": {
#                   "reject": {
#                     "enable": true,
#                     "profile": "test_dyn_app",
#                     "ssl_proxy": {
#                       "enable": true,
#                       "profile_name": "SECURITY-SSL-PROXY"
#                     }
#                   }
#                 }
#               }
#             ]
#           },
#           {
#             "name": "three",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_3",
#                 "then": {
#                   "permit": {
#                     "application_services": {
#                       "application_traffic_control_rule_set": "test_traffic_control",
#                       "gprs_gtp_profile": "gtp1",
#                       "icap_redirect": "test_icap",
#                       "reverse_redirect_wx": "True",
#                       "uac_policy": {
#                         "enable": true
#                       }
#                     },
#                     "firewall_authentication": {
#                       "push_to_identity_management": true,
#                       "web_authentication": [
#                         "FWClient1"
#                       ]
#                     },
#                     "tcp_options": {
#                       "initial_tcp_mss": 64,
#                       "window_scale": true
#                     }
#                   }
#                 }
#               }
#             ]
#           }
#         ]
#       }
#     ],
#     "global": {
#       "policies": [
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv4": true
#             },
#             "source_address": {
#               "any_ipv4": true
#             }
#           },
#           "name": "test_glob",
#           "then": {
#             "deny": true
#           }
#         },
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_1",
#           "then": {
#             "deny": true
#           }
#         },
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_2",
#           "then": {
#             "deny": true
#           }
#         }
#       ]
#     }
#   },
#   "before": {
#     "global": {
#       "policies": [
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv4": true
#             },
#             "source_address": {
#               "any_ipv4": true
#             }
#           },
#           "name": "test_glob",
#           "then": {
#             "deny": true
#           }
#         }
#       ]
#     }
#   },
#   "changed": true,
#   "commands": "<nc:security
#                   xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#                   <nc:policies>
#                     <nc:policy>
#                       <nc:from-zone-name>one</nc:from-zone-name>
#                       <nc:to-zone-name>two</nc:to-zone-name>
#                       <nc:policy>
#                         <nc:name>test_policy_1</nc:name>
#                         <nc:match>
#                           <nc:source-address>a1</nc:source-address>
#                           <nc:source-address>a3</nc:source-address>
#                           <nc:source-address-excluded/>
#                           <nc:destination-address>a2</nc:destination-address>
#                           <nc:destination-address>a4</nc:destination-address>
#                           <nc:destination-address-excluded/>
#                           <nc:application>junos-dhcp-relay</nc:application>
#                           <nc:application>junos-finger</nc:application>
#                           <nc:source-end-user-profile>test_end_user_profile</nc:source-end-user-profile>
#                           <nc:source-identity>unknown-user</nc:source-identity>
#                           <nc:url-category>Enhanced_Web_Chat</nc:url-category>
#                           <nc:dynamic-application>any</nc:dynamic-application>
#                         </nc:match>
#                         <nc:then>
#                           <nc:deny/>
#                           <nc:count></nc:count>
#                           <nc:log>
#                             <nc:session-close/>
#                           </nc:log>
#                         </nc:then>
#                       </nc:policy>
#                       <nc:policy>
#                         <nc:name>test_policy_2</nc:name>
#                         <nc:match>
#                           <nc:source-address>a1</nc:source-address>
#                           <nc:destination-address>any-ipv6</nc:destination-address>
#                           <nc:application>any</nc:application>
#                         </nc:match>
#                         <nc:then>
#                           <nc:reject>
#                             <nc:profile>test_dyn_app</nc:profile>
#                             <nc:ssl-proxy>
#                               <nc:profile-name>SECURITY-SSL-PROXY</nc:profile-name>
#                             </nc:ssl-proxy>
#                           </nc:reject>
#                         </nc:then>
#                       </nc:policy>
#                     </nc:policy>
#                     <nc:policy>
#                       <nc:from-zone-name>one</nc:from-zone-name>
#                       <nc:to-zone-name>three</nc:to-zone-name>
#                       <nc:policy>
#                         <nc:name>test_policy_3</nc:name>
#                         <nc:match>
#                           <nc:source-address>a1</nc:source-address>
#                           <nc:destination-address>a2</nc:destination-address>
#                           <nc:application>any</nc:application>
#                         </nc:match>
#                         <nc:then>
#                           <nc:permit>
#                             <nc:application-services>
#                               <nc:application-traffic-control>
#                                 <nc:rule-set>test_traffic_control</nc:rule-set>
#                               </nc:application-traffic-control>
#                               <nc:gprs-gtp-profile>gtp1</nc:gprs-gtp-profile>
#                               <nc:icap-redirect>test_icap</nc:icap-redirect>
#                               <nc:reverse-redirect-wx/>
#                               <nc:uac-policy></nc:uac-policy>
#                             </nc:application-services>
#                             <nc:firewall-authentication>
#                               <nc:push-to-identity-management/>
#                               <nc:web-authentication>
#                                 <nc:client-match>FWClient1</nc:client-match>
#                               </nc:web-authentication>
#                             </nc:firewall-authentication>
#                             <nc:tcp-options>
#                               <nc:initial-tcp-mss>64</nc:initial-tcp-mss>
#                               <nc:window-scale/>
#                             </nc:tcp-options>
#                           </nc:permit>
#                         </nc:then>
#                       </nc:policy>
#                     </nc:policy>
#                     <nc:global>
#                       <nc:policy>
#                         <nc:name>test_glob_1</nc:name>
#                         <nc:match>
#                           <nc:source-address>any-ipv6</nc:source-address>
#                           <nc:destination-address>any-ipv6</nc:destination-address>
#                           <nc:application>any</nc:application>
#                         </nc:match>
#                         <nc:then>
#                           <nc:deny/>
#                         </nc:then>
#                       </nc:policy>
#                       <nc:policy>
#                         <nc:name>test_glob_2</nc:name>
#                         <nc:match>
#                           <nc:source-address>any-ipv6</nc:source-address>
#                           <nc:destination-address>any-ipv6</nc:destination-address>
#                           <nc:application>any</nc:application>
#                         </nc:match>
#                         <nc:then>
#                           <nc:deny/>
#                         </nc:then>
#                       </nc:policy>
#                     </nc:global>
#                   </nc:policies>
#                 </nc:security>
#                 "
# After state
# -----------
#
# [email protected]> show security policies
# Default policy: deny-all
# Pre ID default policy: permit-all
# From zone: one, To zone: two
# Policy: test_policy_1, State: enabled, Index: 5, Scope Policy: 0, Sequence number: 1
# Source addresses(excluded): a1, a3
# Destination addresses(excluded): a2, a4
# Source-end-user-profile: test_end_user_profile(1)
# Applications: junos-dhcp-relay, junos-finger
# Dynamic Applications: any
# Url-category: Enhanced_Web_Chat
# Source identities: unknown-user
# Action: deny, log, count
# Policy: test_policy_2, State: enabled, Index: 6, Scope Policy: 0, Sequence number: 2
# Source addresses: a1
# Destination addresses: any-ipv6
# Applications: any
# Action: reject
# dynapp-redir-profile: test_dyn_app(1)
# From zone: one, To zone: three
# Policy: test_policy_3, State: enabled, Index: 7, Scope Policy: 0, Sequence number: 1
# Source addresses: a1
# Destination addresses: a2
# Applications: any
# Action: permit, firewall authentication, application services, unified access control
# Application traffic control: test_traffic_control
# Global policies:
# Policy: test_glob, State: enabled, Index: 4, Scope Policy: 0, Sequence number: 1
# From zones: any
# To zones: any
# Source addresses: any-ipv4
# Destination addresses: any-ipv4
# Applications: any
# Action: deny
# Policy: test_glob_1, State: enabled, Index: 8, Scope Policy: 0, Sequence number: 2
# From zones: any
# To zones: any
# Source addresses: any-ipv6
# Destination addresses: any-ipv6
# Applications: any
# Action: deny
# Policy: test_glob_2, State: enabled, Index: 9, Scope Policy: 0, Sequence number: 3
# From zones: any
# To zones: any
# Source addresses: any-ipv6
# Destination addresses: any-ipv6
# Applications: any
# Action: deny


# Using Replaced
# Before state
# ------------
#
# [email protected]> show security policies
# Default policy: deny-all
# Pre ID default policy: permit-all
# From zone: one, To zone: two
# Policy: test_policy_1, State: enabled, Index: 5, Scope Policy: 0, Sequence number: 1
# Source addresses(excluded): a1, a3
# Destination addresses(excluded): a2, a4
# Source-end-user-profile: test_end_user_profile(1)
# Applications: junos-dhcp-relay, junos-finger
# Dynamic Applications: any
# Url-category: Enhanced_Web_Chat
# Source identities: unknown-user
# Action: deny, log, count
# Policy: test_policy_2, State: enabled, Index: 6, Scope Policy: 0, Sequence number: 2
# Source addresses: a1
# Destination addresses: any-ipv6
# Applications: any
# Action: reject
# dynapp-redir-profile: test_dyn_app(1)
# From zone: one, To zone: three
# Policy: test_policy_3, State: enabled, Index: 7, Scope Policy: 0, Sequence number: 1
# Source addresses: a1
# Destination addresses: a2
# Applications: any
# Action: permit, firewall authentication, application services, unified access control
# Application traffic control: test_traffic_control
# Global policies:
# Policy: test_glob, State: enabled, Index: 4, Scope Policy: 0, Sequence number: 1
# From zones: any
# To zones: any
# Source addresses: any-ipv4
# Destination addresses: any-ipv4
# Applications: any
# Action: deny
# Policy: test_glob_1, State: enabled, Index: 8, Scope Policy: 0, Sequence number: 2
# From zones: any
# To zones: any
# Source addresses: any-ipv6
# Destination addresses: any-ipv6
# Applications: any
# Action: deny
# Policy: test_glob_2, State: enabled, Index: 9, Scope Policy: 0, Sequence number: 3
# From zones: any
# To zones: any
# Source addresses: any-ipv6
# Destination addresses: any-ipv6
# Applications: any
# Action: deny
#
- junipernetworks.junos.junos_security_policies:
    config:
      global:
        policies:
          - description: test update
            match:
              application:
                any: true
              destination_address:
                any_ipv6: true
              source_address:
                any: true
            name: test_glob_3
            then:
              deny: true
    state: replaced
#
# -------------------------
# Module Execution Result
# -------------------------
#   "after": {
#     "global": {
#       "policies": [
#         {
#           "description": "test update",
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any": true
#             }
#           },
#           "name": "test_glob_3",
#           "then": {
#             "deny": true
#           }
#         }
#       ]
#     }
#   },
#   "before": {
#     "from_zones": [
#       {
#         "name": "one",
#         "to_zones": [
#           {
#             "name": "two",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "names": [
#                       "junos-dhcp-relay",
#                       "junos-finger"
#                     ]
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2",
#                       "a4"
#                     ]
#                   },
#                   "destination_address_excluded": true,
#                   "dynamic_application": {
#                     "names": [
#                       "any"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1",
#                       "a3"
#                     ]
#                   },
#                   "source_address_excluded": true,
#                   "source_end_user_profile": "test_end_user_profile",
#                   "source_identity": {
#                     "unknown_user": true
#                   },
#                   "url_category": {
#                     "names": [
#                       "Enhanced_Web_Chat"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_1",
#                 "then": {
#                   "count": true,
#                   "deny": true,
#                   "log": "session-close"
#                 }
#               },
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "any_ipv6": true
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_2",
#                 "then": {
#                   "reject": {
#                     "enable": true,
#                     "profile": "test_dyn_app",
#                     "ssl_proxy": {
#                       "enable": true,
#                       "profile_name": "SECURITY-SSL-PROXY"
#                     }
#                   }
#                 }
#               }
#             ]
#           },
#           {
#             "name": "three",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_3",
#                 "then": {
#                   "permit": {
#                     "application_services": {
#                       "application_traffic_control_rule_set": "test_traffic_control",
#                       "gprs_gtp_profile": "gtp1",
#                       "icap_redirect": "test_icap",
#                       "reverse_redirect_wx": "True",
#                       "uac_policy": {
#                         "enable": true
#                       }
#                     },
#                     "firewall_authentication": {
#                       "push_to_identity_management": true,
#                       "web_authentication": [
#                         "FWClient1"
#                       ]
#                     },
#                     "tcp_options": {
#                       "initial_tcp_mss": 64,
#                       "window_scale": true
#                     }
#                   }
#                 }
#               }
#             ]
#           }
#         ]
#       }
#     ],
#     "global": {
#       "policies": [
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv4": true
#             },
#             "source_address": {
#               "any_ipv4": true
#             }
#           },
#           "name": "test_glob",
#           "then": {
#             "deny": true
#           }
#         },
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_1",
#           "then": {
#             "deny": true
#           }
#         },
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_2",
#           "then": {
#             "deny": true
#           }
#         }
#       ]
#     }
#   },
#   "changed": true,
#   "commands": "<nc:security
#                   xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#                   <nc:policies delete="delete"/>
#                   <nc:policies>
#                     <nc:global>
#                       <nc:policy>
#                         <nc:name>test_glob_3</nc:name>
#                         <nc:description>test update</nc:description>
#                         <nc:match>
#                           <nc:source-address>any</nc:source-address>
#                           <nc:destination-address>any-ipv6</nc:destination-address>
#                           <nc:application>any</nc:application>
#                         </nc:match>
#                         <nc:then>
#                           <nc:deny/>
#                         </nc:then>
#                       </nc:policy>
#                     </nc:global>
#                   </nc:policies>
#                 </nc:security>"
# }
# After state
# -----------
#
# [email protected]> show security policies
# Default policy: deny-all
# Pre ID default policy: permit-all
# Global policies:
# Policy: test_glob_3, State: enabled, Index: 10, Scope Policy: 0, Sequence number: 1
# From zones: any
# To zones: any
# Source addresses: any
# Destination addresses: any-ipv6
# Applications: any
# Action: deny


# Using overridden
#
# Before state
# ------------
#
# [email protected]> show security policies
# Default policy: deny-all
# Pre ID default policy: permit-all
# From zone: one, To zone: two
# Policy: test_policy_1, State: enabled, Index: 5, Scope Policy: 0, Sequence number: 1
# Source addresses(excluded): a1, a3
# Destination addresses(excluded): a2, a4
# Source-end-user-profile: test_end_user_profile(1)
# Applications: junos-dhcp-relay, junos-finger
# Dynamic Applications: any
# Url-category: Enhanced_Web_Chat
# Source identities: unknown-user
# Action: deny, log, count
# Policy: test_policy_2, State: enabled, Index: 6, Scope Policy: 0, Sequence number: 2
# Source addresses: a1
# Destination addresses: any-ipv6
# Applications: any
# Action: reject
# dynapp-redir-profile: test_dyn_app(1)
# From zone: one, To zone: three
# Policy: test_policy_3, State: enabled, Index: 7, Scope Policy: 0, Sequence number: 1
# Source addresses: a1
# Destination addresses: a2
# Applications: any
# Action: permit, firewall authentication, application services, unified access control
# Application traffic control: test_traffic_control
# Global policies:
# Policy: test_glob, State: enabled, Index: 4, Scope Policy: 0, Sequence number: 1
# From zones: any
# To zones: any
# Source addresses: any-ipv4
# Destination addresses: any-ipv4
# Applications: any
# Action: deny
# Policy: test_glob_1, State: enabled, Index: 8, Scope Policy: 0, Sequence number: 2
# From zones: any
# To zones: any
# Source addresses: any-ipv6
# Destination addresses: any-ipv6
# Applications: any
# Action: deny
# Policy: test_glob_2, State: enabled, Index: 9, Scope Policy: 0, Sequence number: 3
# From zones: any
# To zones: any
# Source addresses: any-ipv6
# Destination addresses: any-ipv6
# Applications: any
# Action: deny
#
- junipernetworks.junos.junos_security_policies:
    config:
      global:
        policies:
          - description: test update
            match:
              application:
                any: true
              destination_address:
                any_ipv6: true
              source_address:
                any: true
            name: test_glob_3
            then:
              deny: true
    state: overridden
#
# -------------------------
# Module Execution Result
# -------------------------
#   "after": {
#     "global": {
#       "policies": [
#         {
#           "description": "test update",
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any": true
#             }
#           },
#           "name": "test_glob_3",
#           "then": {
#             "deny": true
#           }
#         }
#       ]
#     }
#   },
#   "before": {
#     "from_zones": [
#       {
#         "name": "one",
#         "to_zones": [
#           {
#             "name": "two",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "names": [
#                       "junos-dhcp-relay",
#                       "junos-finger"
#                     ]
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2",
#                       "a4"
#                     ]
#                   },
#                   "destination_address_excluded": true,
#                   "dynamic_application": {
#                     "names": [
#                       "any"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1",
#                       "a3"
#                     ]
#                   },
#                   "source_address_excluded": true,
#                   "source_end_user_profile": "test_end_user_profile",
#                   "source_identity": {
#                     "unknown_user": true
#                   },
#                   "url_category": {
#                     "names": [
#                       "Enhanced_Web_Chat"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_1",
#                 "then": {
#                   "count": true,
#                   "deny": true,
#                   "log": "session-close"
#                 }
#               },
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "any_ipv6": true
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_2",
#                 "then": {
#                   "reject": {
#                     "enable": true,
#                     "profile": "test_dyn_app",
#                     "ssl_proxy": {
#                       "enable": true,
#                       "profile_name": "SECURITY-SSL-PROXY"
#                     }
#                   }
#                 }
#               }
#             ]
#           },
#           {
#             "name": "three",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_3",
#                 "then": {
#                   "permit": {
#                     "application_services": {
#                       "application_traffic_control_rule_set": "test_traffic_control",
#                       "gprs_gtp_profile": "gtp1",
#                       "icap_redirect": "test_icap",
#                       "reverse_redirect_wx": "True",
#                       "uac_policy": {
#                         "enable": true
#                       }
#                     },
#                     "firewall_authentication": {
#                       "push_to_identity_management": true,
#                       "web_authentication": [
#                         "FWClient1"
#                       ]
#                     },
#                     "tcp_options": {
#                       "initial_tcp_mss": 64,
#                       "window_scale": true
#                     }
#                   }
#                 }
#               }
#             ]
#           }
#         ]
#       }
#     ],
#     "global": {
#       "policies": [
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv4": true
#             },
#             "source_address": {
#               "any_ipv4": true
#             }
#           },
#           "name": "test_glob",
#           "then": {
#             "deny": true
#           }
#         },
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_1",
#           "then": {
#             "deny": true
#           }
#         },
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_2",
#           "then": {
#             "deny": true
#           }
#         }
#       ]
#     }
#   },
#   "changed": true,
#   "commands": "<nc:security
#                   xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#                   <nc:policies delete="delete"/>
#                   <nc:policies>
#                     <nc:global>
#                       <nc:policy>
#                         <nc:name>test_glob_3</nc:name>
#                         <nc:description>test update</nc:description>
#                         <nc:match>
#                           <nc:source-address>any</nc:source-address>
#                           <nc:destination-address>any-ipv6</nc:destination-address>
#                           <nc:application>any</nc:application>
#                         </nc:match>
#                         <nc:then>
#                           <nc:deny/>
#                         </nc:then>
#                       </nc:policy>
#                     </nc:global>
#                   </nc:policies>
#                 </nc:security>"
# }
# After state
# -----------
#
# [email protected]> show security policies
# Default policy: deny-all
# Pre ID default policy: permit-all
# Global policies:
# Policy: test_glob_3, State: enabled, Index: 10, Scope Policy: 0, Sequence number: 1
# From zones: any
# To zones: any
# Source addresses: any
# Destination addresses: any-ipv6
# Applications: any
# Action: deny


# Using deleted
#
# Before state
# ------------
#
# [email protected]> show security policies
# Default policy: deny-all
# Pre ID default policy: permit-all
# Global policies:
# Policy: test_glob_3, State: enabled, Index: 10, Scope Policy: 0, Sequence number: 1
# From zones: any
# To zones: any
# Source addresses: any
# Destination addresses: any-ipv6
# Applications: any
# Action: deny
#
- junipernetworks.junos.junos_security_policies:
    config:
    state: deleted
#
# -------------------------
# Module Execution Result
# -------------------------
#
#   "after": {},
#   "before": {
#     "global": {
#       "policies": [
#         {
#           "description": "test update",
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any": true
#             }
#           },
#           "name": "test_glob_3",
#           "then": {
#             "deny": true
#           }
#         }
#       ]
#     }
#   },
#   "changed": true,
#   "commands": "<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#   <nc:policies delete="delete"/></nc:security>"
#
# After state
# -----------
#
# [email protected]> show security policies
# Default policy: deny-all
# Pre ID default policy: permit-all


# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply>
#     <configuration>
#         <version>18.4R1-S3.1</version>
#         <services>
#             <ssl>
#                 <termination>
#                     <profile>
#                         <name>test_ssl_term</name>
#                         <server-certificate>SECURITY-cert</server-certificate>
#                     </profile>
#                 </termination>
#                 <proxy>
#                     <profile>
#                         <name>SECURITY-SSL-PROXY</name>
#                         <root-ca>SECURITY-cert</root-ca>
#                     </profile>
#                 </proxy>
#             </ssl>
#             <icap-redirect>
#                 <profile>
#                     <name>test_icap</name>
#                     <server>
#                         <name>test_icap_server</name>
#                         <host>10.10.10.11</host>
#                     </server>
#                 </profile>
#             </icap-redirect>
#             <user-identification>
#                 <device-information>
#                     <end-user-profile>
#                         <profile-name>
#                             <name>test_end_user_profile</name>
#                             <domain-name>test_domain</domain-name>
#                             <attribute>
#                                 <name>device-identity</name>
#                                 <string>Windows</string>
#                             </attribute>
#                         </profile-name>
#                     </end-user-profile>
#                 </device-information>
#             </user-identification>
#         </services>
#         <security>
#             <address-book>
#                 <name>global</name>
#                 <address>
#                     <name>a1</name>
#                     <ip-prefix>200.0.113.0/24</ip-prefix>
#                 </address>
#                 <address>
#                     <name>a2</name>
#                     <ip-prefix>201.0.113.0/24</ip-prefix>
#                 </address>
#                 <address>
#                     <name>a3</name>
#                     <ip-prefix>202.0.113.0/24</ip-prefix>
#                 </address>
#                 <address>
#                     <name>a4</name>
#                     <ip-prefix>203.0.113.0/24</ip-prefix>
#                 </address>
#             </address-book>
#             <dynamic-application>
#                 <profile>
#                     <name>test_dyn_app</name>
#                     <redirect-message>
#                         <type>
#                             <custom-text>
#                                 <content>hello_world</content>
#                             </custom-text>
#                         </type>
#                     </redirect-message>
#                 </profile>
#             </dynamic-application>
#             <policies>
#                 <policy>
#                     <from-zone-name>one</from-zone-name>
#                     <to-zone-name>two</to-zone-name>
#                     <policy>
#                         <name>test_policy_1</name>
#                         <match>
#                             <source-address>a1</source-address>
#                             <source-address>a3</source-address>
#                             <destination-address>a2</destination-address>
#                             <destination-address>a4</destination-address>
#                             <source-address-excluded />
#                             <destination-address-excluded />
#                             <application>junos-dhcp-relay</application>
#                             <application>junos-finger</application>
#                             <source-identity>authenticated-user</source-identity>
#                             <source-identity>unknown-user</source-identity>
#                             <source-end-user-profile>
#                                 <source-end-user-profile-name>test_end_user_profile</source-end-user-profile-name>
#                             </source-end-user-profile>
#                             <dynamic-application>any</dynamic-application>
#                             <url-category>Enhanced_Web_Chat</url-category>
#                         </match>
#                         <then>
#                             <deny />
#                             <log>
#                                 <session-close />
#                             </log>
#                             <count></count>
#                         </then>
#                     </policy>
#                     <policy>
#                         <name>test_policy_2</name>
#                         <match>
#                             <source-address>a1</source-address>
#                             <destination-address>any-ipv6</destination-address>
#                             <application>any</application>
#                         </match>
#                         <then>
#                             <reject>
#                                 <profile>test_dyn_app</profile>
#                                 <ssl-proxy>
#                                     <profile-name>SECURITY-SSL-PROXY</profile-name>
#                                 </ssl-proxy>
#                             </reject>
#                         </then>
#                     </policy>
#                 </policy>
#                 <policy>
#                     <from-zone-name>one</from-zone-name>
#                     <to-zone-name>three</to-zone-name>
#                     <policy>
#                         <name>test_policy_3</name>
#                         <match>
#                             <source-address>a1</source-address>
#                             <destination-address>a2</destination-address>
#                             <application>any</application>
#                         </match>
#                         <then>
#                             <permit>
#                                 <firewall-authentication>
#                                     <web-authentication>
#                                         <client-match>FWClient1</client-match>
#                                     </web-authentication>
#                                     <push-to-identity-management />
#                                 </firewall-authentication>
#                                 <destination-address>
#                                     <drop-untranslated />
#                                 </destination-address>
#                                 <application-services>
#                                     <gprs-gtp-profile>gtp1</gprs-gtp-profile>
#                                     <uac-policy></uac-policy>
#                                     <icap-redirect>test_icap</icap-redirect>
#                                     <application-traffic-control>
#                                         <rule-set>test_traffic_control</rule-set>
#                                     </application-traffic-control>
#                                     <reverse-redirect-wx />
#                                 </application-services>
#                                 <tcp-options>
#                                     <initial-tcp-mss>64</initial-tcp-mss>
#                                     <window-scale />
#                                 </tcp-options>
#                             </permit>
#                         </then>
#                     </policy>
#                 </policy>
#                 <global>
#                     <policy>
#                         <name>test_glob_1</name>
#                         <match>
#                             <source-address>any-ipv6</source-address>
#                             <destination-address>any-ipv6</destination-address>
#                             <application>any</application>
#                         </match>
#                         <then>
#                             <deny />
#                         </then>
#                     </policy>
#                     <policy>
#                         <name>test_glob_2</name>
#                         <match>
#                             <source-address>any-ipv6</source-address>
#                             <destination-address>any-ipv6</destination-address>
#                             <application>any</application>
#                         </match>
#                         <then>
#                             <deny />
#                         </then>
#                     </policy>
#                 </global>
#             </policies>
#             <zones>
#                 <security-zone>
#                     <name>one</name>
#                     <interfaces>
#                         <name>ge-0/0/0.0</name>
#                     </interfaces>
#                 </security-zone>
#                 <security-zone>
#                     <name>two</name>
#                     <interfaces>
#                         <name>ge-0/0/1.0</name>
#                     </interfaces>
#                 </security-zone>
#                 <security-zone>
#                     <name>three</name>
#                     <interfaces>
#                         <name>ge-0/0/2.0</name>
#                     </interfaces>
#                 </security-zone>
#             </zones>
#             <gprs>
#                 <gtp>
#                     <profile>
#                         <name>gtp1</name>
#                     </profile>
#                 </gtp>
#             </gprs>
#         </security>
#         <interfaces>
#             <interface>
#                 <name>ge-0/0/0</name>
#                 <unit>
#                     <name>0</name>
#                     <family>
#                         <inet>
#                             <address>
#                                 <name>200.0.113.1/24</name>
#                             </address>
#                         </inet>
#                     </family>
#                 </unit>
#             </interface>
#             <interface>
#                 <name>ge-0/0/1</name>
#                 <unit>
#                     <name>0</name>
#                     <family>
#                         <inet>
#                             <address>
#                                 <name>201.0.113.1/24</name>
#                             </address>
#                         </inet>
#                     </family>
#                 </unit>
#             </interface>
#             <interface>
#                 <name>ge-0/0/2</name>
#                 <unit>
#                     <name>0</name>
#                     <family>
#                         <inet>
#                             <address>
#                                 <name>202.0.113.1/24</name>
#                             </address>
#                         </inet>
#                     </family>
#                 </unit>
#             </interface>
#             <interface>
#                 <name>fxp0</name>
#                 <unit>
#                     <name>0</name>
#                     <family>
#                         <inet>
#                             <dhcp></dhcp>
#                         </inet>
#                     </family>
#                 </unit>
#             </interface>
#         </interfaces>
#         <class-of-service>
#             <application-traffic-control>
#                 <rule-sets>
#                     <name>test_traffic_control</name>
#                     <rule>
#                         <name>test_rule</name>
#                         <match>
#                             <application-known />
#                         </match>
#                         <then>
#                             <log />
#                         </then>
#                     </rule>
#                 </rule-sets>
#             </application-traffic-control>
#         </class-of-service>
#         <access>
#             <profile>
#                 <name>WEBAUTH</name>
#                 <client>
#                     <name>FWClient1</name>
#                     <firewall-user>
#                         <password>$9$kq5Ftu1cSe</password>
#                     </firewall-user>
#                 </client>
#             </profile>
#             <firewall-authentication>
#                 <web-authentication>
#                     <default-profile>WEBAUTH</default-profile>
#                 </web-authentication>
#             </firewall-authentication>
#         </access>
#     </configuration>
#     <database-status-information></database-status-information>
# </rpc-reply>
#
- name: Parse NTP global running config
  junipernetworks.junos.junos_security_policies:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#   "parsed": {
#     "from_zones": [
#       {
#         "name": "one",
#         "to_zones": [
#           {
#             "name": "two",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "names": [
#                       "junos-dhcp-relay",
#                       "junos-finger"
#                     ]
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2",
#                       "a4"
#                     ]
#                   },
#                   "destination_address_excluded": true,
#                   "dynamic_application": {
#                     "names": [
#                       "any"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1",
#                       "a3"
#                     ]
#                   },
#                   "source_address_excluded": true,
#                   "source_end_user_profile": "test_end_user_profile",
#                   "source_identity": {
#                     "unknown_user": true
#                   },
#                   "url_category": {
#                     "names": [
#                       "Enhanced_Web_Chat"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_1",
#                 "then": {
#                   "count": true,
#                   "deny": true,
#                   "log": "session-close"
#                 }
#               },
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "any_ipv6": true
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_2",
#                 "then": {
#                   "reject": {
#                     "enable": true,
#                     "profile": "test_dyn_app",
#                     "ssl_proxy": {
#                       "enable": true,
#                       "profile_name": "SECURITY-SSL-PROXY"
#                     }
#                   }
#                 }
#               }
#             ]
#           },
#           {
#             "name": "three",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_3",
#                 "then": {
#                   "permit": {
#                     "application_services": {
#                       "application_traffic_control_rule_set": "test_traffic_control",
#                       "gprs_gtp_profile": "gtp1",
#                       "icap_redirect": "test_icap",
#                       "reverse_redirect_wx": "True",
#                       "uac_policy": {
#                         "enable": true
#                       }
#                     },
#                     "firewall_authentication": {
#                       "push_to_identity_management": true,
#                       "web_authentication": [
#                         "FWClient1"
#                       ]
#                     },
#                     "tcp_options": {
#                       "initial_tcp_mss": 64,
#                       "window_scale": true
#                     }
#                   }
#                 }
#               }
#             ]
#           }
#         ]
#       }
#     ],
#     "global": {
#       "policies": [
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_1",
#           "then": {
#             "deny": true
#           }
#         },
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_2",
#           "then": {
#             "deny": true
#           }
#         }
#       ]
#     }
#   }


# Using gathered
#
# Before state
# ------------
#
# [email protected]> show security policies
# Default policy: deny-all
# Pre ID default policy: permit-all
# From zone: one, To zone: two
# Policy: test_policy_1, State: enabled, Index: 4, Scope Policy: 0, Sequence number: 1
# Source addresses(excluded): a1, a3
# Destination addresses(excluded): a2, a4
# Source-end-user-profile: test_end_user_profile(1)
# Applications: junos-dhcp-relay, junos-finger
# Dynamic Applications: any
# Url-category: Enhanced_Web_Chat
# Source identities: authenticated-user, unknown-user
# Action: deny, log, count
# Policy: test_policy_2, State: enabled, Index: 5, Scope Policy: 0, Sequence number: 2
# Source addresses: a1
# Destination addresses: any-ipv6
# Applications: any
# Action: reject
# dynapp-redir-profile: test_dyn_app(1)
# From zone: one, To zone: three
# Policy: test_policy_3, State: enabled, Index: 6, Scope Policy: 0, Sequence number: 1
# Source addresses: a1
# Destination addresses: a2
# Applications: any
# Action: permit, drop-untranslated, firewall authentication, application services, unified access control
# Application traffic control: test_traffic_control
# Global policies:
# Policy: test_glob_1, State: enabled, Index: 7, Scope Policy: 0, Sequence number: 1
# From zones: any
# To zones: any
# Source addresses: any-ipv6
# Destination addresses: any-ipv6
# Applications: any
# Action: deny
# Policy: test_glob_2, State: enabled, Index: 8, Scope Policy: 0, Sequence number: 2
# From zones: any
# To zones: any
# Source addresses: any-ipv6
# Destination addresses: any-ipv6
# Applications: any
# Action: deny
#
- junipernetworks.junos.junos_security_policies:
    state: gathered
#
# -------------------------
# Module Execution Result
# -------------------------
#
#   "changed": false,
#   "gathered": {
#     "from_zones": [
#       {
#         "name": "one",
#         "to_zones": [
#           {
#             "name": "two",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "names": [
#                       "junos-dhcp-relay",
#                       "junos-finger"
#                     ]
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2",
#                       "a4"
#                     ]
#                   },
#                   "destination_address_excluded": true,
#                   "dynamic_application": {
#                     "names": [
#                       "any"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1",
#                       "a3"
#                     ]
#                   },
#                   "source_address_excluded": true,
#                   "source_end_user_profile": "test_end_user_profile",
#                   "source_identity": {
#                     "unknown_user": true
#                   },
#                   "url_category": {
#                     "names": [
#                       "Enhanced_Web_Chat"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_1",
#                 "then": {
#                   "count": true,
#                   "deny": true,
#                   "log": "session-close"
#                 }
#               },
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "any_ipv6": true
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_2",
#                 "then": {
#                   "reject": {
#                     "enable": true,
#                     "profile": "test_dyn_app",
#                     "ssl_proxy": {
#                       "enable": true,
#                       "profile_name": "SECURITY-SSL-PROXY"
#                     }
#                   }
#                 }
#               }
#             ]
#           },
#           {
#             "name": "three",
#             "policies": [
#               {
#                 "match": {
#                   "application": {
#                     "any": true
#                   },
#                   "destination_address": {
#                     "addresses": [
#                       "a2"
#                     ]
#                   },
#                   "source_address": {
#                     "addresses": [
#                       "a1"
#                     ]
#                   }
#                 },
#                 "name": "test_policy_3",
#                 "then": {
#                   "permit": {
#                     "application_services": {
#                       "application_traffic_control_rule_set": "test_traffic_control",
#                       "gprs_gtp_profile": "gtp1",
#                       "icap_redirect": "test_icap",
#                       "reverse_redirect_wx": "True",
#                       "uac_policy": {
#                         "enable": true
#                       }
#                     },
#                     "firewall_authentication": {
#                       "push_to_identity_management": true,
#                       "web_authentication": [
#                         "FWClient1"
#                       ]
#                     },
#                     "tcp_options": {
#                       "initial_tcp_mss": 64,
#                       "window_scale": true
#                     }
#                   }
#                 }
#               }
#             ]
#           }
#         ]
#       }
#     ],
#     "global": {
#       "policies": [
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_1",
#           "then": {
#             "deny": true
#           }
#         },
#         {
#           "match": {
#             "application": {
#               "any": true
#             },
#             "destination_address": {
#               "any_ipv6": true
#             },
#             "source_address": {
#               "any_ipv6": true
#             }
#           },
#           "name": "test_glob_2",
#           "then": {
#             "deny": true
#           }
#         }
#       ]
#     }
#   }
# }


# Using rendered
#
# Before state
# ------------
#
- junipernetworks.junos.junos_security_policies:
    config:
      global:
          policies:
            - description: test update
              match:
                application:
                  any: true
                destination_address:
                  any_ipv6: true
                source_address:
                  any: true
              name: test_glob_3
              then:
                deny: true
    state: rendered
#
# -------------------------
# Module Execution Result
# -------------------------
#     "rendered": "<nc:security
#                 xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#                 <nc:policies>
#                   <nc:global>
#                     <nc:policy>
#                       <nc:name>test_glob_3</nc:name>
#                       <nc:description>test update</nc:description>
#                       <nc:match>
#                         <nc:source-address>any</nc:source-address>
#                         <nc:destination-address>any-ipv6</nc:destination-address>
#                         <nc:application>any</nc:application>
#                       </nc:match>
#                       <nc:then>
#                         <nc:deny/>
#                       </nc:then>
#                     </nc:policy>
#                   </nc:global>
#                 </nc:policies>
#               </nc:security>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration after module execution.

Returned: when changed

Sample: “This output will always be in the same format as the module argspec.\n”

before

dictionary

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden or deleted

Sample: “This output will always be in the same format as the module argspec.\n”

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden or deleted

Sample: [”\u003crpc-reply\u003e \u003cconfiguration\u003e \u003csecurity\u003e \u003cpolicies\u003e \u003cglobal\u003e \u003cpolicy\u003e \u003cname\u003etest_glob_1\u003c/name\u003e \u003cmatch\u003e \u003csource-address\u003eany-ipv6\u003c/source-address\u003e \u003cdestination-address\u003eany-ipv6\u003c/destination-address\u003e \u003capplication\u003eany\u003c/application\u003e \u003c/match\u003e \u003cthen\u003e \u003cdeny /\u003e \u003c/then\u003e \u003c/policy\u003e \u003c/global\u003e \u003c/policies\u003e \u003c/security\u003e \u003c/configuration\u003e \u003c/rpc-reply\u003e”]

gathered

dictionary

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: “This output will always be in the same format as the module argspec.\n”

parsed

dictionary

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: “This output will always be in the same format as the module argspec.\n”

rendered

dictionary

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: [”\u003crpc-reply\u003e \u003cconfiguration\u003e \u003csecurity\u003e \u003cpolicies\u003e \u003cglobal\u003e \u003cpolicy\u003e \u003cname\u003etest_glob_1\u003c/name\u003e \u003cmatch\u003e \u003csource-address\u003eany-ipv6\u003c/source-address\u003e \u003cdestination-address\u003eany-ipv6\u003c/destination-address\u003e \u003capplication\u003eany\u003c/application\u003e \u003c/match\u003e \u003cthen\u003e \u003cdeny /\u003e \u003c/then\u003e \u003c/policy\u003e \u003c/global\u003e \u003c/policies\u003e \u003c/security\u003e \u003c/configuration\u003e \u003c/rpc-reply\u003e”]

Authors

  • Pranav Bhatt (@pranav-bhatt)