junipernetworks.junos.junos_security_zones module – Manage security zones on Juniper JUNOS devices
Note
This module is part of the junipernetworks.junos collection (version 8.0.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install junipernetworks.junos.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: junipernetworks.junos.junos_security_zones.
New in junipernetworks.junos 2.9.0
Synopsis
This module provides declarative management of security zones on Juniper JUNOS devices
Aliases: security_zones
Requirements
The below requirements are needed on the host that executes this module.
ncclient (>=v0.6.4)
xmltodict (>=0.12.0)
Parameters
Parameter |
Comments |
|---|---|
Dictionary of security zone parameters |
|
Functional zone to configure host for out of band management interfaces |
|
Text description of zone |
|
Allowed system services & protocols |
|
Protocol type of incoming traffic to accept |
|
Disallow the specified protocol traffic Choices:
|
|
Type of incoming protocol to accept |
|
Type of incoming system-service traffic to accept |
|
Disallow the specified incoming system-service traffic Choices:
|
|
Type of incoming system-service traffic to accept |
|
Interfaces that are part of this zone |
|
Name of ids option object applied to the zone |
|
Security zones |
|
Address book entries |
|
Define security address sets |
|
Define an address-set name |
|
Addresses to be included in this set |
|
Text description of address set |
|
Name of address set |
|
Define security addresses |
|
Text description of address |
|
DNS address name |
|
IPv4 dns address Choices:
|
|
IPv6 dns address Choices:
|
|
Fully qualified hostname |
|
Numeric IPv4 or IPv6 address with prefix |
|
Name of address |
|
Address range |
|
Start of address range |
|
End of address range |
|
Numeric IPv4 wildcard address with in the form of a.d.d.r/netmask |
|
Enable Advance Policy Based Routing on this zone |
|
Enable Advance Policy Based Routing on this zone |
|
Set connection tracking mode Choices:
|
|
Timeout value in seconds for advanced-connection-tracking table for this zone |
|
Mandate all policies with to-zone set to this zone to do connection track table lookup Choices:
|
|
Enable Application tracking support for this zone Choices:
|
|
Text description of zone |
|
Enable Reverse route lookup when there is change in ingress interface Choices:
|
|
Allowed system services & protocols |
|
Protocol type of incoming traffic to accept |
|
Disallow the specified protocol traffic Choices:
|
|
Type of incoming protocol to accept |
|
Type of incoming system-service traffic to accept |
|
Disallow the specified incoming system-service traffic Choices:
|
|
Type of incoming system-service traffic to accept |
|
Interfaces that are part of this zone |
|
Name of the security zone |
|
Name of ids option object applied to the zone |
|
Show user and group info in session log for this zone Choices:
|
|
Send RST for NON-SYN packet not matching TCP session Choices:
|
|
Enable unidirectional session refreshing on this zone Choices:
|
|
This option is used only with state parsed. The value of this option should be the output received from the JunOS device by executing the command show security policies. The state parsed reads the configuration from |
|
The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from Choices:
|
Notes
Note
This module requires the netconf system service be enabled on the device being managed.
This module works with connection
netconf.Tested against JunOS v18.4R1
Examples
# Using merged
#
# Before state
# ------------
#
# vagrant@vsrx# show security zones
#
# [edit]
# vagrant@vsrx# show security zones
#
- name: Merge the provided configuration with the exisiting running configuration
junipernetworks.junos.junos_security_zones: &merged
config:
functional_zone_management:
description: test description
host_inbound_traffic:
protocols:
- name: all
- name: bgp
except: true
system_services:
- name: all
- except: true
name: dhcp
interfaces:
- ge-0/0/1.0
- ge-0/0/2.0
screen: test_screen
security_zones:
- address_book:
address_sets:
- addresses:
- test_adr1
- test_adr2
name: test_adrset1
- addresses:
- test_adr3
- test_adr4
name: test_adrset2
- address_sets:
- test_adrset1
- test_adrset2
addresses:
- test_adr5
description: test description
name: test_adrset3
addresses:
- description: test desc
ip_prefix: 10.0.0.0/24
name: test_adr1
- dns_name:
ipv6_only: true
name: 1.1.1.1
name: test_adr2
- name: test_adr3
range_address:
from: 10.2.0.1
to: 10.2.0.2
- name: test_adr4
wildcard_address: 10.3.0.1/24
- description: test desc
ip_prefix: 10.1.0.0/24
name: test_adr5
advance_policy_based_routing_profile: test_profile
application_tracking: true
description: test description
enable_reverse_reroute: true
host_inbound_traffic:
protocols:
- name: all
- except: true
name: bgp
system_services:
- name: all
- except: true
name: dhcp
interfaces:
- ge-0/0/3.0
- ge-0/0/4.0
name: test_sec_zone1
screen: test_screen
source_identity_log: true
tcp_rst: true
state: merged
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
# "functional_zone_management": {
# "description": "test description",
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/1.0",
# "ge-0/0/2.0"
# ],
# "screen": "test_screen"
# },
# "security_zones": [
# {
# "address_book": {
# "address_sets": [
# {
# "addresses": [
# "test_adr1",
# "test_adr2"
# ],
# "name": "test_adrset1"
# },
# {
# "addresses": [
# "test_adr3",
# "test_adr4"
# ],
# "name": "test_adrset2"
# },
# {
# "address_sets": [
# "test_adrset1",
# "test_adrset2"
# ],
# "addresses": [
# "test_adr5"
# ],
# "description": "test description",
# "name": "test_adrset3"
# }
# ],
# "addresses": [
# {
# "description": "test desc",
# "ip_prefix": "10.0.0.0/24",
# "name": "test_adr1"
# },
# {
# "dns_name": {
# "ipv6_only": true,
# "name": "1.1.1.1"
# },
# "name": "test_adr2"
# },
# {
# "name": "test_adr3",
# "range_address": {
# "from": "10.2.0.1",
# "to": "10.2.0.2"
# }
# },
# {
# "name": "test_adr4",
# "wildcard_address": "10.3.0.1/24"
# },
# {
# "description": "test desc",
# "ip_prefix": "10.1.0.0/24",
# "name": "test_adr5"
# }
# ]
# },
# "advance_policy_based_routing_profile": "test_profile",
# "application_tracking": true,
# "description": "test description",
# "enable_reverse_reroute": true,
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/3.0",
# "ge-0/0/4.0"
# ],
# "name": "test_sec_zone1",
# "screen": "test_screen",
# "source_identity_log": true,
# "tcp_rst": true
# }
# ]
# },
# "before": {},
# "changed": true,
# "commands":
# '<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:zones><nc:functional-zone><nc:management><nc:description>t'
# 'est description</nc:description><nc:host-inbound-traffic><nc:protocols><nc:name>all</nc:name></nc:protocols><nc:protocols><nc:na'
# 'me>bgp</nc:name><nc:except/></nc:protocols><nc:system-services><nc:name>all</nc:name></nc:system-services><nc:system-services><n'
# 'c:name>dhcp</nc:name><nc:except/></nc:system-services></nc:host-inbound-traffic><nc:interfaces><nc:name>ge-0/0/1.0</nc:name></nc'
# ':interfaces><nc:interfaces><nc:name>ge-0/0/2.0</nc:name></nc:interfaces><nc:screen>test_screen</nc:screen></nc:management></nc:f'
# 'unctional-zone><nc:security-zone><nc:name>test_sec_zone1</nc:name><nc:address-book><nc:address><nc:name>test_adr1</nc:name><nc:i'
# 'p-prefix>10.0.0.0/24</nc:ip-prefix><nc:description>test desc</nc:description></nc:address><nc:address><nc:name>test_adr2</nc:nam'
# 'e><nc:dns-name><nc:name>1.1.1.1</nc:name><nc:ipv6-only/></nc:dns-name></nc:address><nc:address><nc:name>test_adr3</nc:name><nc:r'
# 'ange-address><nc:name>10.2.0.1</nc:name><nc:to><nc:range-high>10.2.0.2</nc:range-high></nc:to></nc:range-address></nc:address><n'
# 'c:address><nc:name>test_adr4</nc:name><nc:wildcard-address><nc:name>10.3.0.1/24</nc:name></nc:wildcard-address></nc:address><nc:'
# 'address><nc:name>test_adr5</nc:name><nc:ip-prefix>10.1.0.0/24</nc:ip-prefix><nc:description>test desc</nc:description></nc:addre'
# 'ss><nc:address-set><nc:name>test_adrset1</nc:name><nc:address><nc:name>test_adr1</nc:name></nc:address><nc:address><nc:name>test'
# '_adr2</nc:name></nc:address></nc:address-set><nc:address-set><nc:name>test_adrset2</nc:name><nc:address><nc:name>test_adr3</nc:n'
# 'ame></nc:address><nc:address><nc:name>test_adr4</nc:name></nc:address></nc:address-set><nc:address-set><nc:name>test_adrset3</nc'
# ':name><nc:address><nc:name>test_adr5</nc:name></nc:address><nc:address-set><nc:name>test_adrset1</nc:name></nc:address-set><nc:a'
# 'ddress-set><nc:name>test_adrset2</nc:name></nc:address-set><nc:description>test description</nc:description></nc:address-set></n'
# 'c:address-book><nc:advance-policy-based-routing-profile><nc:profile>test_profile</nc:profile></nc:advance-policy-based-routing-p'
# 'rofile><nc:application-tracking/><nc:description>test description</nc:description><nc:enable-reverse-reroute/><nc:host-inbound-t'
# 'raffic><nc:protocols><nc:name>all</nc:name></nc:protocols><nc:protocols><nc:name>bgp</nc:name><nc:except/></nc:protocols><nc:sys'
# 'tem-services><nc:name>all</nc:name></nc:system-services><nc:system-services><nc:name>dhcp</nc:name><nc:except/></nc:system-servi'
# 'ces></nc:host-inbound-traffic><nc:interfaces><nc:name>ge-0/0/3.0</nc:name></nc:interfaces><nc:interfaces><nc:name>ge-0/0/4.0</nc'
# ':name></nc:interfaces><nc:screen>test_screen</nc:screen><nc:source-identity-log/><nc:tcp-rst/></nc:security-zone></nc:zones></nc'
# ':security>'
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# functional-zone management {
# interfaces {
# ge-0/0/1.0;
# ge-0/0/2.0;
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# description "test description";
# }
# security-zone test_sec_zone1 {
# description "test description";
# tcp-rst;
# address-book {
# address test_adr1 {
# description "test desc";
# 10.0.0.0/24;
# }
# address test_adr2 {
# dns-name 1.1.1.1 {
# ipv6-only;
# }
# }
# address test_adr3 {
# range-address 10.2.0.1 {
# to {
# 10.2.0.2;
# }
# }
# }
# address test_adr4 {
# wildcard-address 10.3.0.1/24;
# }
# address test_adr5 {
# description "test desc";
# 10.1.0.0/24;
# }
# address-set test_adrset1 {
# address test_adr1;
# address test_adr2;
# }
# address-set test_adrset2 {
# address test_adr3;
# address test_adr4;
# }
# address-set test_adrset3 {
# description "test description";
# address test_adr5;
# address-set test_adrset1;
# address-set test_adrset2;
# }
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# interfaces {
# ge-0/0/3.0;
# ge-0/0/4.0;
# }
# application-tracking;
# source-identity-log;
# advance-policy-based-routing-profile {
# test_profile;
# }
# enable-reverse-reroute;
# }
#
#
# Using Replaced
# Before state
# ------------
#
# vagrant@vsrx# show security zones
# functional-zone management {
# interfaces {
# ge-0/0/1.0;
# ge-0/0/2.0;
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# description "test description";
# }
# security-zone test_sec_zone1 {
# description "test description";
# tcp-rst;
# address-book {
# address test_adr1 {
# description "test desc";
# 10.0.0.0/24;
# }
# address test_adr2 {
# dns-name 1.1.1.1 {
# ipv6-only;
# }
# }
# address test_adr3 {
# range-address 10.2.0.1 {
# to {
# 10.2.0.2;
# }
# }
# }
# address test_adr4 {
# wildcard-address 10.3.0.1/24;
# }
# address test_adr5 {
# description "test desc";
# 10.1.0.0/24;
# }
# address-set test_adrset1 {
# address test_adr1;
# address test_adr2;
# }
# address-set test_adrset2 {
# address test_adr3;
# address test_adr4;
# }
# address-set test_adrset3 {
# description "test description";
# address test_adr5;
# address-set test_adrset1;
# address-set test_adrset2;
# }
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# interfaces {
# ge-0/0/3.0;
# ge-0/0/4.0;
# }
# application-tracking;
# source-identity-log;
# advance-policy-based-routing-profile {
# test_profile;
# }
# enable-reverse-reroute;
# }
#
#
- name: Replaced running security zones configuration with provided configuration
junipernetworks.junos.junos_security_zones:
config:
functional_zone_management:
description: test description
host_inbound_traffic:
protocols:
- name: all
- name: bgp
except: true
system_services:
- name: all
- except: true
name: dhcp
interfaces:
- ge-0/0/1.0
- ge-0/0/2.0
screen: test_screen
state: replaced
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
# "functional_zone_management": {
# "description": "test description",
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/1.0",
# "ge-0/0/2.0"
# ],
# "screen": "test_screen"
# }
# },
# "before": {
# "functional_zone_management": {
# "description": "test description",
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/1.0",
# "ge-0/0/2.0"
# ],
# "screen": "test_screen"
# },
# "security_zones": [
# {
# "address_book": {
# "address_sets": [
# {
# "addresses": [
# "test_adr1",
# "test_adr2"
# ],
# "name": "test_adrset1"
# },
# {
# "addresses": [
# "test_adr3",
# "test_adr4"
# ],
# "name": "test_adrset2"
# },
# {
# "address_sets": [
# "test_adrset1",
# "test_adrset2"
# ],
# "addresses": [
# "test_adr5"
# ],
# "description": "test description",
# "name": "test_adrset3"
# }
# ],
# "addresses": [
# {
# "description": "test desc",
# "ip_prefix": "10.0.0.0/24",
# "name": "test_adr1"
# },
# {
# "dns_name": {
# "ipv6_only": true,
# "name": "1.1.1.1"
# },
# "name": "test_adr2"
# },
# {
# "name": "test_adr3",
# "range_address": {
# "from": "10.2.0.1",
# "to": "10.2.0.2"
# }
# },
# {
# "name": "test_adr4",
# "wildcard_address": "10.3.0.1/24"
# },
# {
# "description": "test desc",
# "ip_prefix": "10.1.0.0/24",
# "name": "test_adr5"
# }
# ]
# },
# "advance_policy_based_routing_profile": "test_profile",
# "application_tracking": true,
# "description": "test description",
# "enable_reverse_reroute": true,
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/3.0",
# "ge-0/0/4.0"
# ],
# "name": "test_sec_zone1",
# "screen": "test_screen",
# "source_identity_log": true,
# "tcp_rst": true
# }
# ]
# },
# "changed": true,
# "commands":
# '<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:zones delete="delete"/><nc:zones><nc:functional-zone><nc'
# ':management><nc:description>test description</nc:description><nc:host-inbound-traffic><nc:protocols><nc:name>all</nc:name></nc:p'
# 'rotocols><nc:protocols><nc:name>bgp</nc:name><nc:except/></nc:protocols><nc:system-services><nc:name>all</nc:name></nc:system-se'
# 'rvices><nc:system-services><nc:name>dhcp</nc:name><nc:except/></nc:system-services></nc:host-inbound-traffic><nc:interfaces><nc:'
# 'name>ge-0/0/1.0</nc:name></nc:interfaces><nc:interfaces><nc:name>ge-0/0/2.0</nc:name></nc:interfaces><nc:screen>test_screen</nc:'
# 'screen></nc:management></nc:functional-zone></nc:zones></nc:security>'
#
#
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# functional-zone management {
# interfaces {
# ge-0/0/1.0;
# ge-0/0/2.0;
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# description "test description";
# }
#
#
# Using overridden
#
# Before state
# ------------
#
# vagrant@vsrx# show security zones
# functional-zone management {
# interfaces {
# ge-0/0/1.0;
# ge-0/0/2.0;
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# description "test description";
# }
# security-zone test_sec_zone1 {
# description "test description";
# tcp-rst;
# address-book {
# address test_adr1 {
# description "test desc";
# 10.0.0.0/24;
# }
# address test_adr2 {
# dns-name 1.1.1.1 {
# ipv6-only;
# }
# }
# address test_adr3 {
# range-address 10.2.0.1 {
# to {
# 10.2.0.2;
# }
# }
# }
# address test_adr4 {
# wildcard-address 10.3.0.1/24;
# }
# address test_adr5 {
# description "test desc";
# 10.1.0.0/24;
# }
# address-set test_adrset1 {
# address test_adr1;
# address test_adr2;
# }
# address-set test_adrset2 {
# address test_adr3;
# address test_adr4;
# }
# address-set test_adrset3 {
# description "test description";
# address test_adr5;
# address-set test_adrset1;
# address-set test_adrset2;
# }
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# interfaces {
# ge-0/0/3.0;
# ge-0/0/4.0;
# }
# application-tracking;
# source-identity-log;
# advance-policy-based-routing-profile {
# test_profile;
# }
# enable-reverse-reroute;
# }
#
#
- name: Override running security zones configuration with provided configuration
junipernetworks.junos.junos_security_zones:
config:
functional_zone_management:
description: test description
host_inbound_traffic:
protocols:
- name: all
- name: bgp
except: true
system_services:
- name: all
- except: true
name: dhcp
interfaces:
- ge-0/0/1.0
- ge-0/0/2.0
screen: test_screen
state: overridden
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
# "functional_zone_management": {
# "description": "test description",
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/1.0",
# "ge-0/0/2.0"
# ],
# "screen": "test_screen"
# }
# },
# "before": {
# "functional_zone_management": {
# "description": "test description",
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/1.0",
# "ge-0/0/2.0"
# ],
# "screen": "test_screen"
# },
# "security_zones": [
# {
# "address_book": {
# "address_sets": [
# {
# "addresses": [
# "test_adr1",
# "test_adr2"
# ],
# "name": "test_adrset1"
# },
# {
# "addresses": [
# "test_adr3",
# "test_adr4"
# ],
# "name": "test_adrset2"
# },
# {
# "address_sets": [
# "test_adrset1",
# "test_adrset2"
# ],
# "addresses": [
# "test_adr5"
# ],
# "description": "test description",
# "name": "test_adrset3"
# }
# ],
# "addresses": [
# {
# "description": "test desc",
# "ip_prefix": "10.0.0.0/24",
# "name": "test_adr1"
# },
# {
# "dns_name": {
# "ipv6_only": true,
# "name": "1.1.1.1"
# },
# "name": "test_adr2"
# },
# {
# "name": "test_adr3",
# "range_address": {
# "from": "10.2.0.1",
# "to": "10.2.0.2"
# }
# },
# {
# "name": "test_adr4",
# "wildcard_address": "10.3.0.1/24"
# },
# {
# "description": "test desc",
# "ip_prefix": "10.1.0.0/24",
# "name": "test_adr5"
# }
# ]
# },
# "advance_policy_based_routing_profile": "test_profile",
# "application_tracking": true,
# "description": "test description",
# "enable_reverse_reroute": true,
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/3.0",
# "ge-0/0/4.0"
# ],
# "name": "test_sec_zone1",
# "screen": "test_screen",
# "source_identity_log": true,
# "tcp_rst": true
# }
# ]
# },
# "changed": true,
# "commands":
# '<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:zones delete="delete"/><nc:zones><nc:functional-zone><nc'
# ':management><nc:description>test description</nc:description><nc:host-inbound-traffic><nc:protocols><nc:name>all</nc:name></nc:p'
# 'rotocols><nc:protocols><nc:name>bgp</nc:name><nc:except/></nc:protocols><nc:system-services><nc:name>all</nc:name></nc:system-se'
# 'rvices><nc:system-services><nc:name>dhcp</nc:name><nc:except/></nc:system-services></nc:host-inbound-traffic><nc:interfaces><nc:'
# 'name>ge-0/0/1.0</nc:name></nc:interfaces><nc:interfaces><nc:name>ge-0/0/2.0</nc:name></nc:interfaces><nc:screen>test_screen</nc:'
# 'screen></nc:management></nc:functional-zone></nc:zones></nc:security>'
#
#
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# functional-zone management {
# interfaces {
# ge-0/0/1.0;
# ge-0/0/2.0;
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# description "test description";
# }
#
#
# Using deleted
#
# Before state
# ------------
#
# vagrant@vsrx# show security zones
# functional-zone management {
# interfaces {
# ge-0/0/1.0;
# ge-0/0/2.0;
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# description "test description";
# }
#
#
- name: Delete running security zones configuration
junipernetworks.junos.junos_security_zones:
config:
state: deleted
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {},
# "before": {
# "functional_zone_management": {
# "description": "test description",
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/1.0",
# "ge-0/0/2.0"
# ],
# "screen": "test_screen"
# }
# },
# "changed": true,
# "commands":
# "<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
# "<nc:zones delete="delete"/></nc:security>"
#
#
# After state
# -----------
#
# vagrant@vsrx# show security zones
#
# [edit]
# Using gathered
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# functional-zone management {
# interfaces {
# ge-0/0/1.0;
# ge-0/0/2.0;
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# description "test description";
# }
# security-zone test_sec_zone1 {
# description "test description";
# tcp-rst;
# address-book {
# address test_adr1 {
# description "test desc";
# 10.0.0.0/24;
# }
# address test_adr2 {
# dns-name 1.1.1.1 {
# ipv6-only;
# }
# }
# address test_adr3 {
# range-address 10.2.0.1 {
# to {
# 10.2.0.2;
# }
# }
# }
# address test_adr4 {
# wildcard-address 10.3.0.1/24;
# }
# address test_adr5 {
# description "test desc";
# 10.1.0.0/24;
# }
# address-set test_adrset1 {
# address test_adr1;
# address test_adr2;
# }
# address-set test_adrset2 {
# address test_adr3;
# address test_adr4;
# }
# address-set test_adrset3 {
# description "test description";
# address test_adr5;
# address-set test_adrset1;
# address-set test_adrset2;
# }
# }
# screen test_screen;
# host-inbound-traffic {
# system-services {
# all;
# dhcp {
# except;
# }
# }
# protocols {
# all;
# bgp {
# except;
# }
# }
# }
# interfaces {
# ge-0/0/3.0;
# ge-0/0/4.0;
# }
# application-tracking;
# source-identity-log;
# advance-policy-based-routing-profile {
# test_profile;
# }
# enable-reverse-reroute;
# }
- name: Gather running security zones configuration
junipernetworks.junos.junos_security_zones:
state: gathered
#
# -------------------------
# Module Execution Result
# -------------------------
# "gathered": {
# "functional_zone_management": {
# "description": "test description",
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/1.0",
# "ge-0/0/2.0"
# ],
# "screen": "test_screen"
# },
# "security_zones": [
# {
# "address_book": {
# "address_sets": [
# {
# "addresses": [
# "test_adr1",
# "test_adr2"
# ],
# "name": "test_adrset1"
# },
# {
# "addresses": [
# "test_adr3",
# "test_adr4"
# ],
# "name": "test_adrset2"
# },
# {
# "address_sets": [
# "test_adrset1",
# "test_adrset2"
# ],
# "addresses": [
# "test_adr5"
# ],
# "description": "test description",
# "name": "test_adrset3"
# }
# ],
# "addresses": [
# {
# "description": "test desc",
# "ip_prefix": "10.0.0.0/24",
# "name": "test_adr1"
# },
# {
# "dns_name": {
# "ipv6_only": true,
# "name": "1.1.1.1"
# },
# "name": "test_adr2"
# },
# {
# "name": "test_adr3",
# "range_address": {
# "from": "10.2.0.1",
# "to": "10.2.0.2"
# }
# },
# {
# "name": "test_adr4",
# "wildcard_address": "10.3.0.1/24"
# },
# {
# "description": "test desc",
# "ip_prefix": "10.1.0.0/24",
# "name": "test_adr5"
# }
# ]
# },
# "advance_policy_based_routing_profile": "test_profile",
# "application_tracking": true,
# "description": "test description",
# "enable_reverse_reroute": true,
# "host_inbound_traffic": {
# "protocols": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "bgp"
# }
# ],
# "system_services": [
# {
# "name": "all"
# },
# {
# "except": true,
# "name": "dhcp"
# }
# ]
# },
# "interfaces": [
# "ge-0/0/3.0",
# "ge-0/0/4.0"
# ],
# "name": "test_sec_zone1",
# "screen": "test_screen",
# "source_identity_log": true,
# "tcp_rst": true
# }
# ]
# }
# "changed": false,
#
#
# Using rendered
#
# Before state
# ------------
#
- name: Render xml for provided facts.
junipernetworks.junos.junos_security_zones:
config:
functional_zone_management:
description: test description
host_inbound_traffic:
protocols:
- name: all
- name: bgp
except: true
system_services:
- name: all
- except: true
name: dhcp
interfaces:
- ge-0/0/1.0
- ge-0/0/2.0
screen: test_screen
security_zones:
- address_book:
address_sets:
- addresses:
- test_adr1
- test_adr2
name: test_adrset1
- addresses:
- test_adr3
- test_adr4
name: test_adrset2
- address_sets:
- test_adrset1
- test_adrset2
- addresses:
- test_adr5
description: test description
name: test_adrset3
addresses:
- description: test desc
ip_prefix: 10.0.0.0/24
name: test_adr1
- dns_name:
ipv6_only: true
name: 1.1.1.1
name: test_adr2
- name: test_adr3
range_address:
from: 10.2.0.1
to: 10.2.0.2
- name: test_adr4
wildcard_address: 10.3.0.1/24
- description: test desc
ip_prefix: 10.1.0.0/24
name: test_adr5
advance_policy_based_routing_profile: test_profile
application_tracking: true
description: test description
enable_reverse_reroute: true
host_inbound_traffic:
protocols:
- name: all
- except: true
name: bgp
system_services:
- name: all
- except: true
name: dhcp
interfaces:
- ge-0/0/3.0
- ge-0/0/4.0
name: test_sec_zone1
screen: test_screen
source_identity_log: true
tcp_rst: true
state: rendered
#
# -------------------------
# Module Execution Result
# -------------------------
# "rendered":
# '<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:zones><nc:functional-zone><nc:management><nc:description>t'
# 'est description</nc:description><nc:host-inbound-traffic><nc:protocols><nc:name>all</nc:name></nc:protocols><nc:protocols><nc:na'
# 'me>bgp</nc:name><nc:except/></nc:protocols><nc:system-services><nc:name>all</nc:name></nc:system-services><nc:system-services><n'
# 'c:name>dhcp</nc:name><nc:except/></nc:system-services></nc:host-inbound-traffic><nc:interfaces><nc:name>ge-0/0/1.0</nc:name></nc'
# ':interfaces><nc:interfaces><nc:name>ge-0/0/2.0</nc:name></nc:interfaces><nc:screen>test_screen</nc:screen></nc:management></nc:f'
# 'unctional-zone><nc:security-zone><nc:name>test_sec_zone1</nc:name><nc:address-book><nc:address><nc:name>test_adr1</nc:name><nc:i'
# 'p-prefix>10.0.0.0/24</nc:ip-prefix><nc:description>test desc</nc:description></nc:address><nc:address><nc:name>test_adr2</nc:nam'
# 'e><nc:dns-name><nc:name>1.1.1.1</nc:name><nc:ipv6-only/></nc:dns-name></nc:address><nc:address><nc:name>test_adr3</nc:name><nc:r'
# 'ange-address><nc:name>10.2.0.1</nc:name><nc:to><nc:range-high>10.2.0.2</nc:range-high></nc:to></nc:range-address></nc:address><n'
# 'c:address><nc:name>test_adr4</nc:name><nc:wildcard-address><nc:name>10.3.0.1/24</nc:name></nc:wildcard-address></nc:address><nc:'
# 'address><nc:name>test_adr5</nc:name><nc:ip-prefix>10.1.0.0/24</nc:ip-prefix><nc:description>test desc</nc:description></nc:addre'
# 'ss><nc:address-set><nc:name>test_adrset1</nc:name><nc:address><nc:name>test_adr1</nc:name></nc:address><nc:address><nc:name>test'
# '_adr2</nc:name></nc:address></nc:address-set><nc:address-set><nc:name>test_adrset2</nc:name><nc:address><nc:name>test_adr3</nc:n'
# 'ame></nc:address><nc:address><nc:name>test_adr4</nc:name></nc:address></nc:address-set><nc:address-set><nc:name>test_adrset3</nc'
# ':name><nc:address><nc:name>test_adr5</nc:name></nc:address><nc:address-set><nc:name>test_adrset1</nc:name></nc:address-set><nc:a'
# 'ddress-set><nc:name>test_adrset2</nc:name></nc:address-set><nc:description>test description</nc:description></nc:address-set></n'
# 'c:address-book><nc:advance-policy-based-routing-profile><nc:profile>test_profile</nc:profile></nc:advance-policy-based-routing-p'
# 'rofile><nc:application-tracking/><nc:description>test description</nc:description><nc:enable-reverse-reroute/><nc:host-inbound-t'
# 'raffic><nc:protocols><nc:name>all</nc:name></nc:protocols><nc:protocols><nc:name>bgp</nc:name><nc:except/></nc:protocols><nc:sys'
# 'tem-services><nc:name>all</nc:name></nc:system-services><nc:system-services><nc:name>dhcp</nc:name><nc:except/></nc:system-servi'
# 'ces></nc:host-inbound-traffic><nc:interfaces><nc:name>ge-0/0/3.0</nc:name></nc:interfaces><nc:interfaces><nc:name>ge-0/0/4.0</nc'
# ':name></nc:interfaces><nc:screen>test_screen</nc:screen><nc:source-identity-log/><nc:tcp-rst/></nc:security-zone></nc:zones></nc'
# ':security>'
#
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <version>18.4R1-S2.4</version>
# <security>
# <zones>
# <functional-zone>
# <management>
# <description>test description</description>
# <host-inbound-traffic>
# <protocols>
# <name>all</name>
# </protocols>
# <protocols>
# <name>bgp</name>
# <except />
# </protocols>
# <system-services>
# <name>all</name>
# </system-services>
# <system-services>
# <name>dhcp</name>
# <except />
# </system-services>
# </host-inbound-traffic>
# <interfaces>
# <name>ge-0/0/1.0</name>
# </interfaces>
# <interfaces>
# <name>ge-0/0/2.0</name>
# </interfaces>
# <screen>test_screen</screen>
# </management>
# </functional-zone>
# <security-zone>
# <name>test_sec_zone1</name>
# <address-book>
# <address>
# <name>test_adr1</name>
# <ip-prefix>10.0.0.0/24</ip-prefix>
# <description>test desc</description>
# </address>
# <address>
# <name>test_adr2</name>
# <dns-name>
# <name>1.1.1.1</name>
# <ipv6-only />
# </dns-name>
# </address>
# <address>
# <name>test_adr3</name>
# <range-address>
# <name>10.2.0.1</name>
# <to>
# <range-high>10.2.0.2</range-high>
# </to>
# </range-address>
# </address>
# <address>
# <name>test_adr4</name>
# <wildcard-address>
# <name>10.3.0.1/24</name>
# </wildcard-address>
# </address>
# <address>
# <name>test_adr5</name>
# <ip-prefix>10.1.0.0/24</ip-prefix>
# <description>test desc</description>
# </address>
# <address-set>
# <name>test_adrset1</name>
# <address>
# <name>test_adr1</name>
# </address>
# <address>
# <name>test_adr2</name>
# </address>
# </address-set>
# <address-set>
# <name>test_adrset2</name>
# <address>
# <name>test_adr3</name>
# </address>
# <address>
# <name>test_adr4</name>
# </address>
# </address-set>
# <address-set>
# <name>test_adrset3</name>
# <address>
# <name>test_adr5</name>
# </address>
# <address-set>
# <name>test_adrset1</name>
# </address-set>
# <address-set>
# <name>test_adrset2</name>
# </address-set>
# <description>test description</description>
# </address-set>
# </address-book>
# <advance-policy-based-routing-profile>
# <profile>test_profile</profile>
# </advance-policy-based-routing-profile>
# <application-tracking />
# <description>test description</description>
# <enable-reverse-reroute />
# <host-inbound-traffic>
# <protocols>
# <name>all</name>
# </protocols>
# <protocols>
# <name>bgp</name>
# <except />
# </protocols>
# <system-services>
# <name>all</name>
# </system-services>
# <system-services>
# <name>dhcp</name>
# <except />
# </system-services>
# </host-inbound-traffic>
# <interfaces>
# <name>ge-0/0/3.0</name>
# </interfaces>
# <interfaces>
# <name>ge-0/0/4.0</name>
# </interfaces>
# <screen>test_screen</screen>
# <source-identity-log />
# <tcp-rst />
# </security-zone>
# </zones>
# </security>
# </configuration>
# </rpc-reply>
#
- name: Parse security zones running config
junipernetworks.junos.junos_security_zones:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": {
# "functional_zone_management": {
# "description": "test description 2",
# "host_inbound_traffic": {
# "protocols": [{"name": "all"}, {"except": True, "name": "bgp"}, {"except": True, "name": "bfd"}],
# "system_services": [{"name": "all"}, {"except": True, "name": "dhcp"}, {"except": True, "name": "dhcpv6"}],
# },
# "interfaces": ["ge-0/0/1.0", "ge-0/0/2.0"],
# "screen": "test_screen",
# },
# "security_zones": [
# {
# "address_book": {
# "address_sets": [
# {"addresses": ["test_adr1", "test_adr2"], "name": "test_adrset1"},
# {"addresses": ["test_adr3", "test_adr4"], "name": "test_adrset2"},
# {
# "address_sets": ["test_adrset1", "test_adrset2"],
# "addresses": ["test_adr5"],
# "description": "test description",
# "name": "test_adrset3",
# },
# ],
# "addresses": [
# {"description": "test desc", "ip_prefix": "10.0.0.0/24", "name": "test_adr1"},
# {"dns_name": {"ipv6_only": True, "name": "1.1.1.1"}, "name": "test_adr2"},
# {"name": "test_adr3", "range_address": {"from": "10.2.0.1", "to": "10.2.0.2"}},
# {"name": "test_adr4", "wildcard_address": "10.3.0.1/24"},
# {"description": "test desc", "ip_prefix": "10.1.0.0/24", "name": "test_adr5"},
# ],
# },
# "advance_policy_based_routing_profile": "test_profile",
# "application_tracking": True,
# "description": "test description",
# "enable_reverse_reroute": True,
# "host_inbound_traffic": {
# "protocols": [{"name": "all"}, {"except": True, "name": "bgp"}],
# "system_services": [{"name": "all"}, {"except": True, "name": "dhcp"}],
# },
# "interfaces": ["ge-0/0/3.0", "ge-0/0/4.0"],
# "name": "test_sec_zone1",
# "screen": "test_screen",
# "source_identity_log": True,
# "tcp_rst": True,
# },
# {"name": "test_sec_zone2", "source_identity_log": True, "tcp_rst": True},
# ],
# }
#
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The resulting configuration after module execution. Returned: when changed Sample: |
|
The configuration prior to the module execution. Returned: when state is merged, replaced, overridden, deleted or purged Sample: |
|
The set of commands pushed to the remote device. Returned: when state is merged, replaced, overridden, deleted or purged Sample: |
|
Facts about the network resource gathered from the remote device as structured data. Returned: when state is gathered Sample: |
|
The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is parsed Sample: |
|
The provided configuration in the task rendered in device-native format (offline). Returned: when state is rendered Sample: |