kaytus.ksmanage.edit_snmp module – Set snmp

Note

This module is part of the kaytus.ksmanage collection (version 2.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install kaytus.ksmanage. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: kaytus.ksmanage.edit_snmp.

New in kaytus.ksmanage 1.0.0

Synopsis

  • Set snmp on kaytus Server.

Requirements

The below requirements are needed on the host that executes this module.

  • Python 3.7+

  • inManage

Parameters

Parameter

Comments

auth_password

string

Set the authentication password for the V3 trap or v3get/v3set.

The password is a string of 8 to 16 alphanumeric characters.

Required when auth_protocol is either SHA or MD5.

auth_protocol

string

Choose the authentication protocol for the V3 trap or v3get/v3set.

Choices:

  • "NONE"

  • "SHA"

  • "MD5"

community

string

Community of v1/v2c or v1get/v1set/v2cget/v2cset.

Only the M5 models support this feature.

host

string

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

string

Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

priv_password

string

Set the privacy password for the V3 trap or v3get/v3set.

The password is a string of 8 to 16 alphanumeric characters.

Required when priv_protocol is either DES or AES.

priv_protocol

string

Choose the privacy protocol for the V3 trap or v3get/v3set.

Choices:

  • "NONE"

  • "DES"

  • "AES"

provider

dictionary

A dict object containing connection details.

host

string

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

string

Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

username

string

Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

read_community

string

Read Only Community, Community should between 1 and 16 characters.

Only the M6 models support this feature.

read_write_community

string

Read And Write Community, Community should between 1 and 16 characters.

Only the M6 models support this feature.

snmp_status

list / elements=string

NMP read/write status of customize.

The input parameters are ‘v1get’, ‘v1set’, ‘v2cget’, ‘v2cset’, ‘v3get’, ‘v3set’, separated by commas, such as v1get, v1set, v2cget.

Only the M5 models support this feature.

username

string

Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

v1status

string

SNMP V1 enable.

Choices:

  • "enable"

  • "disable"

v2status

string

SNMP V2 enable.

Choices:

  • "enable"

  • "disable"

v3status

string

SNMP V3 enable.

Choices:

  • "enable"

  • "disable"

v3username

string

Set a username for the V3 trap or v3get/v3set.

version

integer

SNMP trap version option, 0 - ‘v1’, 1 - ‘v2c’, 2 - ‘v3’, 3 - ‘all’, 4 - ‘customize’.

Only the M5 models support this feature.

Choices:

  • 0

  • 1

  • 2

  • 3

  • 4

Notes

Note

  • Does not support check_mode.

Examples

- name: Snmp test
  hosts: ksmanage
  no_log: true
  connection: local
  gather_facts: false
  vars:
    ksmanage:
      host: "{{ ansible_ssh_host }}"
      username: "{{ username }}"
      password: "{{ password }}"

  tasks:

  - name: "Set snmp get/set"
    kaytus.ksmanage.edit_snmp:
      community: "test"
      v3username: "test"
      provider: "{{ ksmanage }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

Check to see if a change was made on the device.

Returned: always

message

string

Messages returned after module execution.

Returned: always

state

string

Status after module execution.

Returned: always

Authors

  • WangBaoshan (@ieisystem)