netapp.ontap.na_ontap_active_directory module – NetApp ONTAP configure active directory

Note

This module is part of the netapp.ontap collection (version 22.12.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: netapp.ontap.na_ontap_active_directory.

New in netapp.ontap 20.9.0

Synopsis 

Configure Active Directory.
REST requires ONTAP 9.12.1 or later.

Requirements 

The below requirements are needed on the host that executes this module.

Ansible 2.9 or later - 2.12 or later is recommended.
Python3 - 3.9 or later is recommended.
When using ZAPI, netapp-lib 2018.11.13 or later (install using ‘pip install netapp-lib’), netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues
a physical or virtual clustered Data ONTAP system, the modules support Data ONTAP 9.1 and onward, REST support requires ONTAP 9.6 or later

Parameters 

Parameter	Comments
account_name string / required	Active Directory account NetBIOS name.
admin_password string / required	Administrator password required for Active Directory account creation.
admin_username string / required	Administrator username required for Active Directory account creation.
cert_filepath string added in netapp.ontap 20.6.0	path to SSL client cert file (.pem). not supported with python 2.6.
domain aliases: fqdn string	Fully qualified domain name.
feature_flags dictionary added in netapp.ontap 20.5.0	Enable or disable a new feature. This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility. Supported keys and values are subject to change without notice. Unknown keys are ignored.
force_account_overwrite boolean	If true and a machine account with the same name as specified in ‘account-name’ exists in Active Directory, it will be overwritten and reused. Choices: `false` `true`
force_ontap_version string added in netapp.ontap 21.23.0	Override the cluster ONTAP version when using REST. The behavior is undefined if the version does not match the target cluster. This is provided as a work-around when the cluster version cannot be read because of permission issues. See https://github.com/ansible-collections/netapp.ontap/wiki/Known-issues. This should be in the form 9.10 or 9.10.1 with each element being an integer number. When `use_rest` is set to auto, this may force a switch to ZAPI based on the version and platform capabilities. Ignored with ZAPI.
hostname string / required	The hostname or IP address of the ONTAP instance.
http_port integer	Override the default port (80 or 443) with this port
https boolean	Enable and disable https. Ignored when using REST as only https is supported. Ignored when using SSL certificate authentication as it requires SSL. Choices: `false` ← (default) `true`
key_filepath string added in netapp.ontap 20.6.0	path to SSL client key file.
ontapi integer	The ontap api version to use
organizational_unit string	Organizational unit under which the Active Directory account will be created.
password aliases: pass string	Password for the specified user.
state string	Whether the Active Directory should exist or not Choices: `"present"` ← (default) `"absent"`
use_rest string	Whether to use REST or ZAPI. always – will always use the REST API if the module supports REST. A warning is issued if the module does not support REST. An error is issued if a module option is not supported in REST. never – will always use ZAPI if the module supports ZAPI. An error may be issued if a REST option is not supported in ZAPI. auto – will try to use the REST API if the module supports REST and modules options are supported. Reverts to ZAPI otherwise. Default: `"auto"`
username aliases: user string	This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/. Two authentication methods are supported basic authentication, using username and password, SSL certificate authentication, using a ssl client cert file, and optionally a private key file. To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.
validate_certs boolean	If set to `no`, the SSL certificates will not be validated. This should only set to `False` used on personally controlled sites using self-signed certificates. Choices: `false` `true` ← (default)
vserver string / required	The name of the vserver to use.

Notes 

Note

Supports check_mode.
supports ZAPI and REST. REST requires ONTAP 9.12.1 or later.
The modules prefixed with na_ontap are built to support the ONTAP storage platform.
https is enabled by default and recommended. To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Examples 

-
  name: Ontap test
  hosts: localhost
  collections:
    - netapp.ontap
  tasks:
    - name: Create active directory account.
      netapp.ontap.na_ontap_active_directory:
        hostname: 10.193.78.219
        username: admin
        password: netapp1!
        https: True
        validate_certs: False
        vserver: laurentncluster-1
        state: present
        account_name: carchi
        admin_password: password
        admin_username: carchi
        domain: addomain.com

    - name: Modify domain name.
      netapp.ontap.na_ontap_active_directory:
        hostname: 10.193.78.219
        username: admin
        password: netapp1!
        https: True
        validate_certs: False
        vserver: laurentncluster-1
        state: present
        account_name: carchi
        admin_password: password
        admin_username: carchi
        domain: addomain_new.com
        force_account_overwrite: True

    - name: Delete active directory account.
      netapp.ontap.na_ontap_active_directory:
        hostname: 10.193.78.219
        username: admin
        password: netapp1!
        https: True
        validate_certs: False
        vserver: laurentncluster-1
        state: absent
        account_name: carchi
        admin_password: password
        admin_username: carchi
        domain: addomain.com

Authors

NetApp Ansible Team (@carchi8py)

netapp.ontap.na_ontap_active_directory module – NetApp ONTAP configure active directory

Synopsis

Requirements

Parameters

Notes

Examples