netapp.ontap.na_ontap_s3_buckets module – NetApp ONTAP S3 Buckets

Note

This module is part of the netapp.ontap collection (version 21.19.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_s3_buckets.

New in version 21.19.0: of netapp.ontap

Synopsis

  • Create, delete, or modify S3 buckets on NetApp ONTAP.

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9

  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’

  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.

  • REST support requires ONTAP 9.6 or later.

  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter

Comments

aggregates

list / elements=string

List of aggregates names to use for the S3 bucket.

audit_event_selector

dictionary

Audit event selector allows you to specify access and permission types to audit.

access

string

specifies the type of event access to be audited, read-only, write-only or all (default is all).

Choices:

  • read-only

  • write-only

  • all

permission

string

specifies the type of event permission to be audited, allow-only, deny-only or all (default is all).

Choices:

  • allow-only

  • deny-only

  • all

cert_filepath

string

added in 20.6.0 of netapp.ontap

path to SSL client cert file (.pem).

not supported with python 2.6.

comment

string

Comment for the S3 bucket.

constituents_per_aggregate

integer

Number of constituents per aggregate.

feature_flags

dictionary

added in 20.5.0 of netapp.ontap

Enable or disable a new feature.

This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.

Supported keys and values are subject to change without notice. Unknown keys are ignored.

hostname

string / required

The hostname or IP address of the ONTAP instance.

http_port

integer

Override the default port (80 or 443) with this port

https

boolean

Enable and disable https.

Ignored when using REST as only https is supported.

Ignored when using SSL certificate authentication as it requires SSL.

Choices:

  • no ← (default)

  • yes

key_filepath

string

added in 20.6.0 of netapp.ontap

path to SSL client key file.

name

string / required

The name of the S3 bucket.

ontapi

integer

The ontap api version to use

password

aliases: pass

string

Password for the specified user.

policy

dictionary

Access policy uses the Amazon Web Services (AWS) policy language syntax to allow S3 tenants to create access policies to their data

statements

list / elements=dictionary

Policy statements are built using this structure to specify permissions

Grant <Effect> to allow/deny <Principal> to perform <Action> on <Resource> when <Condition> applies

actions

list / elements=string

You can specify * to mean all actions, or a list of one or more of the following

GetObject

PutObject

DeleteObject

ListBucket

GetBucketAcl

GetObjectAcl

ListBucketMultipartUploads

ListMultipartUploadParts

conditions

list / elements=dictionary

Conditions for when a policy is in effect.

delimiters

list / elements=string

The delimiter used to identify a prefix in a list of objects.

max_keys

list / elements=string

The maximum number of keys that can be returned in a request.

operator

string

The operator to use for the condition.

Choices:

  • ip_address

  • not_ip_address

  • string_equals

  • string_not_equals

  • string_equals_ignore_case

  • string_not_equals_ignore_case

  • string_like

  • string_not_like

  • numeric_equals

  • numeric_not_equals

  • numeric_greater_than

  • numeric_greater_than_equals

  • numeric_less_than

  • numeric_less_than_equals

prefixes

list / elements=string

The prefixes of the objects that you want to list.

source_ips

list / elements=string

The source IP address of the request.

usernames

list / elements=string

The user names that you want to allow to access the bucket.

effect

string

The statement may allow or deny access

Choices:

  • allow

  • deny

principals

list / elements=string

A list of one or more S3 users or groups.

resources

list / elements=string

The bucket and any object it contains.

The wildcard characters * and ? can be used to form a regular expression for specifying a resource.

sid

string

Statement ID

qos_policy

dictionary

A policy group defines measurable service level objectives (SLOs) that apply to the storage objects with which the policy group is associated.

If you do not assign a policy group to a bucket, the system wil not monitor and control the traffic to it.

max_throughput_iops

integer

The maximum throughput in IOPS.

max_throughput_mbps

integer

The maximum throughput in MBPS.

min_throughput_iops

integer

The minimum throughput in IOPS.

min_throughput_mbps

integer

The minimum throughput in MBPS.

name

string

The QoS policy group name. This is mutually exclusive with other QoS attributes.

size

integer

Size of the S3 bucket in bytes.

state

string

Whether the specified S3 bucket should exist or not.

Choices:

  • present ← (default)

  • absent

use_rest

string

Whether to use REST or ZAPI.

always – will always use the REST API if the module supports REST. A warning is issued if the module does not support REST. An error is issued if a module option is not supported in REST.

never – will always use ZAPI if the module supports ZAPI. An error may be issued if a REST option is not supported in ZAPI.

auto – will try to use the REST API if the module supports REST and modules options are supported. Reverts to ZAPI otherwise.

Default: “auto”

username

aliases: user

string

This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.

For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.

Two authentication methods are supported

  1. basic authentication, using username and password,

  2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.

To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

validate_certs

boolean

If set to no, the SSL certificates will not be validated.

This should only set to False used on personally controlled sites using self-signed certificates.

Choices:

  • no

  • yes ← (default)

vserver

string / required

Name of the vserver to use.

Notes

Note

  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

- name: Create S3 bucket in ONTAP 9.6 and 9.7
  na_ontap_s3_buckets:
    state: present
    name: carchi-test-bucket
    comment: carchi8py was here
    size: 838860800
    vserver: ansibleSVM
    hostname: 10.193.180.108
    username: admin
    password: netapp1!
    https: true
    validate_certs: false
    use_rest: always

- name: Delete S3 bucket
  na_ontap_s3_buckets:
    state: absent
    name: carchi-test-bucket
    vserver: ansibleSVM
    hostname: 10.193.180.108
    username: admin
    password: netapp1!
    https: true
    validate_certs: false
    use_rest: always

Authors

  • NetApp Ansible Team (@carchi8py)