netapp.storagegrid.na_sg_grid_gateway module – Manage Load balancer (gateway) endpoints on StorageGRID.

Note

This module is part of the netapp.storagegrid collection (version 21.11.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.storagegrid.

To use it in a playbook, specify: netapp.storagegrid.na_sg_grid_gateway.

New in version 21.7.0: of netapp.storagegrid

Synopsis

  • Create or Update Load Balancer Endpoints on StorageGRID.

  • This module is idempotent if private_key is not specified.

  • The module will match an existing config based on port and display_name.

  • If multiple load balancer endpoints exist utilizing the same port and display name, use gateway_id to select the intended endpoint.

Parameters

Parameter

Comments

api_url

string / required

The url to the StorageGRID Admin Node REST API.

auth_token

string / required

The authorization token for the API request

binding_mode

string

added in 21.9.0 of netapp.storagegrid

Binding mode to restrict accessibility of the load balancer endpoint.

A binding mode other than global requires StorageGRID 11.5 or greater.

Choices:

  • global ← (default)

  • ha-groups

  • node-interfaces

ca_bundle

string

Intermediate CA certificate bundle in concatenated PEM-encoding.

Omit when there is no intermediate CA.

default_service_type

string

The type of service to proxy through the load balancer.

Choices:

  • s3 ← (default)

  • swift

display_name

string

A display name for the configuration.

This parameter can be modified if gateway_id is also specified.

enable_ipv4

boolean

Indicates whether to listen for connections on IPv4.

Choices:

  • no

  • yes ← (default)

enable_ipv6

boolean

Indicates whether to listen for connections on IPv6.

Choices:

  • no

  • yes ← (default)

gateway_id

string

added in 21.9.0 of netapp.storagegrid

ID of the load balancer endpoint.

ha_groups

list / elements=string

added in 21.9.0 of netapp.storagegrid

A set of StorageGRID HA Groups by name or UUID to bind the load balancer endpoint to.

Option is ignored unless binding_mode=ha-groups.

node_interfaces

list / elements=dictionary

added in 21.9.0 of netapp.storagegrid

A set of StorageGRID node interfaces to bind the load balancer endpoint to.

interface

string

The interface to bind to. eth0 corresponds to the Grid Network, eth1 to the Admin Network, and eth2 to the Client Network.

node

string

Name of the StorageGRID node.

port

integer / required

The TCP port to serve traffic on.

This parameter cannot be modified after the load balancer endpoint has been created.

private_key

string

Certficate private key in PEM-encoding.

Required if server_certificate is not empty.

secure

boolean

Whether the load balancer endpoint serves HTTP or HTTPS traffic.

This parameter cannot be modified after the load balancer endpoint has been created.

Choices:

  • no

  • yes ← (default)

server_certificate

string

X.509 server certificate in PEM-encoding.

Omit if using default certificates.

state

string

Whether the specified load balancer endpoint should be configured.

Choices:

  • present ← (default)

  • absent

validate_certs

boolean

Should https certificates be validated?

Choices:

  • no

  • yes ← (default)

Notes

Note

  • The modules prefixed with na_sg are built to manage NetApp StorageGRID.

Examples

- name: Create and Upload Certificate to a Gateway Endpoint with global binding
  netapp.storagegrid.na_sg_grid_gateway:
    api_url: "https://<storagegrid-endpoint-url>"
    auth_token: "storagegrid-auth-token"
    displayName: "FabricPool Endpoint"
    port: 10443
    secure: True
    enable_ipv4: True
    enable_ipv6: True
    default_service_type: "s3"
    server_certificate: |
      -----BEGIN CERTIFICATE-----
      MIIC6DCCAdACCQC7l4WukhKD0zANBgkqhkiG9w0BAQsFADA2..swCQYDVQQGEwJB
      BAMMHnNnYW4wMS5kZXYubWljcm9icmV3Lm5ldGFwcC5hdTCC..IwDQYJKoZIhvcN
      AQEBBQADggEPADCCAQoCggEBAMvjm9I35lmKcC7ITVL8+QiZ..lvdkbfZCUQrfdy
      71inP+XmPjs0rnkhICA9ItODteRcVlO+t7nDTfm7HgG0mJFk..m0ffyEYrcx24qu
      S7gXYQjRsJmrep1awoaCa20BMGuqK2WKI3IvZ7YiT22qkBqK..+hIFffX6u3Jy+B
      77pR6YcATtpMHW/AaOx+OX9l80dIRsRZKMDxYQ==
      -----END CERTIFICATE-----
    private_key: |
      -----BEGIN PRIVATE KEY-----
      MIIEvgIBADANBgkqhkiG9w0BAQEFAASCBKgwggSkAgEAAoIB..DL45vSN+ZZinAu
      L25W0+cz1Oi69AKkI7d9nbFics2ay5+7o+4rKqf3en2R4MSx..vy+iDlOmATib5O
      x8TN5pJ9AgMBAAECggEADDLM8tHXXUoUFihzv+BUwff8p8Yc..cXFcSes+xTd5li
      po8lNsx/v2pQx4ByBkuaYLZGIEXOWS6gkp44xhIXgQKBgQD4..7862u5HLbmhrV3
      vs8nC69b3QKBgQDacCD8d8JpwPbg8t2VjXM3UvdmgAaLUfU7..DWV+W3jqzmDOoN
      zWVgPbPNj0UmzvLDbgxLoxe77wjn2BHsAJVAfJ9VeQKBgGqF..gYO+wHR8lJUoa5
      ZEe8Upy2oBtvND/0dnwO2ym2FGsBJN0Gr4NKdG5vkzLsthKk..Rm0ikwEUOUZQKE
      K8J5yEVeo9K2v3wggtq8fYn6
      -----END PRIVATE KEY-----
    validate_certs: false

- name: Create a HTTP Gateway Endpoint with HA Group Binding
  netapp.storagegrid.na_sg_grid_gateway:
    api_url: "https://<storagegrid-endpoint-url>"
    auth_token: "storagegrid-auth-token"
    displayName: "App Endpoint 1"
    port: 10501
    secure: false
    enable_ipv4: True
    enable_ipv6: True
    default_service_type: "s3"
    binding_mode: ha-groups
    ha_groups: site1_ha_group
    validate_certs: false

- name: Create a HTTP Gateway Endpoint with Node Interface Binding
  netapp.storagegrid.na_sg_grid_gateway:
    api_url: "https://<storagegrid-endpoint-url>"
    auth_token: "storagegrid-auth-token"
    displayName: "App Endpoint 2"
    port: 10502
    secure: false
    enable_ipv4: True
    enable_ipv6: True
    default_service_type: "s3"
    binding_mode: node-interfaces
    node_interfaecs:
    - node: SITE1_ADM1
      interface: eth2
    - node: SITE2_ADM1
      interface: eth2
    validate_certs: false

- name: Delete Gateway Endpoint
  netapp.storagegrid.na_sg_grid_gateway:
    api_url: "https://<storagegrid-endpoint-url>"
    auth_token: "storagegrid-auth-token"
    displayName: "App Endpoint 2"
    port: 10502
    default_service_type: "s3"
    validate_certs: false

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

resp

dictionary

Returns information about the StorageGRID Load Balancer Endpoint.

Returned: success

Sample: {“accountId”: “0”, “certSource”: “plaintext”, “defaultServiceType”: “s3”, “displayName”: “ansibletest-secure”, “enableIPv4”: true, “enableIPv6”: true, “id”: “ffffffff-ffff-ffff-ffff-ffffffffffff”, “plaintextCertData”: {“caBundleEncoded”: “—–BEGIN CERTIFICATE—–MIIDdTCCAl2gAwIBAgILBAAAAAABFUtaw5QwDQYJKoZIhvcNAQEFBQAwVzELM…—–END CERTIFICATE—–”, “metadata”: {”…”: null}, “serverCertificateEncoded”: “—–BEGIN CERTIFICATE—–MIIC6DCCAdACCQC7l4WukhKD0zANBgkqhkiG9w0BAQsFADA2MQswCQYDVQQGE…—–END CERTIFICATE—–“}, “port”: 10443, “secure”: true}

Authors

  • NetApp Ansible Team (@jkandati)