purestorage.flasharray.purefa_network module – Manage network interfaces in a Pure Storage FlashArray

Note

This module is part of the purestorage.flasharray collection (version 1.27.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install purestorage.flasharray. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: purestorage.flasharray.purefa_network.

New in purestorage.flasharray 1.0.0

Synopsis

  • This module manages the physical and virtual network interfaces on a Pure Storage FlashArray.

  • To manage VLAN interfaces use the purestorage.flasharray.purefa_vlan module.

  • To manage network subnets use the purestorage.flasharray.purefa_subnet module.

  • To remove an IP address from a non-management port use 0.0.0.0/0

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 3.3

  • purestorage >= 1.19

  • py-pure-client >= 1.26.0

  • netaddr

  • requests

  • pycountry

Parameters

Parameter

Comments

address

string

IPv4 or IPv6 address of interface in CIDR notation.

To remove an IP address from a non-management port use 0.0.0.0/0

api_token

string

FlashArray API token for admin privileged user.

enabled

boolean

added in purestorage.flasharray 1.22.0

State of the network interface

Choices:

  • false

  • true ← (default)

fa_url

string

FlashArray management IPv4 address or Hostname.

gateway

string

IPv4 or IPv6 address of interface gateway.

interface

string

added in purestorage.flasharray 1.22.0

Type of interface to create if subinterfaces is supplied

Choices:

  • "vif"

  • "lacp"

mtu

integer

MTU size of the interface. Range is 1280 to 9216.

Default: 1500

name

string / required

Interface name (physical or virtual).

servicelist

list / elements=string

added in purestorage.flasharray 1.15.0

Assigns the specified (comma-separated) service list to one or more specified interfaces.

Replaces the previous service list.

Supported service lists depend on whether the network interface is Ethernet or Fibre Channel.

Note that system is only valid for Cloud Block Store.

Choices:

  • "replication"

  • "management"

  • "ds"

  • "file"

  • "iscsi"

  • "scsi-fc"

  • "nvme-fc"

  • "nvme-tcp"

  • "nvme-roce"

  • "system"

state

string

State of existing interface (on/off).

Choices:

  • "present" ← (default)

  • "absent"

subinterfaces

list / elements=string

added in purestorage.flasharray 1.22.0

List of one or more child devices to be added to a VIF interface

Only the ‘eth’ name needs to be provided, such as ‘eth6’. This interface on all controllers will be assigned to the interface.

subnet

string

added in purestorage.flasharray 1.22.0

Name of the subnet which interface is to be attached

subordinates

list / elements=string

added in purestorage.flasharray 1.22.0

List of one or more child devices to be added to a LACP interface

Subordinates must be on the same controller, therefore the full device needs to be provided.

Notes

Note

  • This module requires the purestorage and py-pure-client Python libraries

  • Additional Python librarues may be required for specific modules.

  • You must set PUREFA_URL and PUREFA_API environment variables if fa_url and api_token arguments are not passed to the module directly

Examples

- name: Configure and enable network interface ct0.eth8
  purestorage.flasharray.purefa_network:
    name: ct0.eth8
    gateway: 10.21.200.1
    address: "10.21.200.18/24"
    mtu: 9000
    state: present
    fa_url: 10.10.10.2
    api_token: c6033033-fe69-2515-a9e8-966bb7fe4b40

- name: Disable physical interface ct1.eth2
  purestorage.flasharray.purefa_network:
    name: ct1.eth2
    state: absent
    fa_url: 10.10.10.2
    api_token: c6033033-fe69-2515-a9e8-966bb7fe4b40

- name: Enable virtual network interface vir0
  purestorage.flasharray.purefa_network:
    name: vir0
    state: present
    fa_url: 10.10.10.2
    api_token: c6033033-fe69-2515-a9e8-966bb7fe4b40

- name: Remove an IP address from iSCSI interface ct0.eth4
  purestorage.flasharray.purefa_network:
    name: ct0.eth4
    address: 0.0.0.0/0
    gateway: 0.0.0.0
    fa_url: 10.10.10.2
    api_token: c6033033-fe69-2515-a9e8-966bb7fe4b40

- name: Change service list for FC interface ct0.fc1
  purestorage.flasharray.purefa_network:
    name: ct0.fc1
    servicelist:
      - replication
    fa_url: 10.10.10.2
    api_token: c6033033-fe69-2515-a9e8-966bb7fe4b40

Authors

  • Pure Storage Ansible Team (@sdodsley)