vyos.vyos.vyos_ospfv3 module – OSPFV3 resource module

Note

This module is part of the vyos.vyos collection (version 5.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_ospfv3.

New in vyos.vyos 1.0.0

Synopsis 

This resource module configures and manages attributes of OSPFv3 routes on VyOS network devices.

Parameters 

Parameter	Comments
config dictionary	A provided OSPFv3 route configuration.
areas list / elements=dictionary	OSPFv3 area.
area_id string	OSPFv3 Area name/identity.
export_list string	Name of export-list.
import_list string	Name of import-list.
range list / elements=dictionary	Summarize routes matching prefix (border routers only).
address string	border router IPv4 address.
advertise boolean	Advertise this range. Choices: `false` `true`
not_advertise boolean	Don’t advertise this range. Choices: `false` `true`
parameters dictionary	OSPFv3 specific parameters.
router_id string	Override the default router identifier.
redistribute list / elements=dictionary	Redistribute information from another routing protocol.
route_map string	Route map references.
route_type string	Route type to redistribute. Choices: `"bgp"` `"connected"` `"kernel"` `"ripng"` `"static"`
running_config string	This option is used only with state parsed. The value of this option should be the output received from the VyOS device by executing the command show configuration commands \| grep ospfv3. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Choices: `"merged"` ← (default) `"replaced"` `"deleted"` `"parsed"` `"gathered"` `"rendered"`

Notes 

Note

Tested against VyOS 1.1.8 (helium).
This module works with connection ansible.netcommon.network_cli. See the VyOS OS Platform Options.

Examples 

# Using merged
#
# Before state:
# -------------
#
# vyos@vyos# run show  configuration commands | grep ospfv3
#
#
- name: Merge the provided configuration with the existing running configuration
  vyos.vyos.vyos_ospfv3:
    config:
      redistribute:
        - route_type: bgp
      parameters:
        router_id: 192.0.2.10
      areas:
        - area_id: '2'
          export_list: export1
          import_list: import1
          range:
            - address: '2001:db10::/32'
            - address: '2001:db20::/32'
            - address: '2001:db30::/32'
        - area_id: '3'
          range:
            - address: '2001:db40::/32'
    state: merged

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# before": {}
#
#    "commands": [
#       "set protocols ospfv3 redistribute bgp",
#       "set protocols ospfv3 parameters router-id '192.0.2.10'",
#       "set protocols ospfv3 area 2 range 2001:db10::/32",
#       "set protocols ospfv3 area 2 range 2001:db20::/32",
#       "set protocols ospfv3 area 2 range 2001:db30::/32",
#       "set protocols ospfv3 area '2'",
#       "set protocols ospfv3 area 2 export-list export1",
#       "set protocols ospfv3 area 2 import-list import1",
#       "set protocols ospfv3 area '3'",
#       "set protocols ospfv3 area 3 range 2001:db40::/32"
#    ]
#
# "after": {
#        "areas": [
#            {
#                "area_id": "2",
#                "export_list": "export1",
#                "import_list": "import1",
#                "range": [
#                    {
#                        "address": "2001:db10::/32"
#                    },
#                    {
#                        "address": "2001:db20::/32"
#                    },
#                    {
#                        "address": "2001:db30::/32"
#                    }
#                ]
#            },
#            {
#                "area_id": "3",
#                "range": [
#                    {
#                        "address": "2001:db40::/32"
#                    }
#                ]
#            }
#        ],
#        "parameters": {
#            "router_id": "192.0.2.10"
#        },
#        "redistribute": [
#            {
#                "route_type": "bgp"
#            }
#        ]
#    }
#
# After state:
# -------------
#
# vyos@192# run show configuration commands | grep ospfv3
# set protocols ospfv3 area 2 export-list 'export1'
# set protocols ospfv3 area 2 import-list 'import1'
# set protocols ospfv3 area 2 range '2001:db10::/32'
# set protocols ospfv3 area 2 range '2001:db20::/32'
# set protocols ospfv3 area 2 range '2001:db30::/32'
# set protocols ospfv3 area 3 range '2001:db40::/32'
# set protocols ospfv3 parameters router-id '192.0.2.10'
# set protocols ospfv3 redistribute 'bgp'


# Using replaced
#
# Before state:
# -------------
#
# vyos@192# run show configuration commands | grep ospfv3
# set protocols ospfv3 area 2 export-list 'export1'
# set protocols ospfv3 area 2 import-list 'import1'
# set protocols ospfv3 area 2 range '2001:db10::/32'
# set protocols ospfv3 area 2 range '2001:db20::/32'
# set protocols ospfv3 area 2 range '2001:db30::/32'
# set protocols ospfv3 area 3 range '2001:db40::/32'
# set protocols ospfv3 parameters router-id '192.0.2.10'
# set protocols ospfv3 redistribute 'bgp'
#
- name: Replace ospfv3 routes attributes configuration.
  vyos.vyos.vyos_ospfv3:
    config:
      redistribute:
        - route_type: bgp
      parameters:
        router_id: 192.0.2.10
      areas:
        - area_id: '2'
          export_list: export1
          import_list: import1
          range:
            - address: '2001:db10::/32'
            - address: '2001:db30::/32'
            - address: '2001:db50::/32'
        - area_id: '4'
          range:
            - address: '2001:db60::/32'
    state: replaced

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": {
#        "areas": [
#            {
#                "area_id": "2",
#                "export_list": "export1",
#                "import_list": "import1",
#                "range": [
#                    {
#                        "address": "2001:db10::/32"
#                    },
#                    {
#                        "address": "2001:db20::/32"
#                    },
#                    {
#                        "address": "2001:db30::/32"
#                    }
#                ]
#            },
#            {
#                "area_id": "3",
#                "range": [
#                    {
#                        "address": "2001:db40::/32"
#                    }
#                ]
#            }
#        ],
#        "parameters": {
#            "router_id": "192.0.2.10"
#        },
#        "redistribute": [
#            {
#                "route_type": "bgp"
#            }
#        ]
#    }
#
# "commands": [
#     "delete protocols ospfv3 area 2 range 2001:db20::/32",
#     "delete protocols ospfv3 area 3",
#     "set protocols ospfv3 area 2 range 2001:db50::/32",
#     "set protocols ospfv3 area '4'",
#     "set protocols ospfv3 area 4 range 2001:db60::/32"
#    ]
#
#    "after": {
#        "areas": [
#            {
#                "area_id": "2",
#                "export_list": "export1",
#                "import_list": "import1",
#                "range": [
#                    {
#                        "address": "2001:db10::/32"
#                    },
#                    {
#                        "address": "2001:db30::/32"
#                    },
#                    {
#                        "address": "2001:db50::/32"
#                    }
#                ]
#            },
#            {
#                "area_id": "4",
#                "range": [
#                    {
#                        "address": "2001:db60::/32"
#                    }
#                ]
#            }
#        ],
#        "parameters": {
#            "router_id": "192.0.2.10"
#        },
#        "redistribute": [
#            {
#                "route_type": "bgp"
#            }
#        ]
#    }
#
# After state:
# -------------
#
# vyos@192# run show configuration commands | grep ospfv3
# set protocols ospfv3 area 2 export-list 'export1'
# set protocols ospfv3 area 2 import-list 'import1'
# set protocols ospfv3 area 2 range '2001:db10::/32'
# set protocols ospfv3 area 2 range '2001:db30::/32'
# set protocols ospfv3 area 2 range '2001:db50::/32'
# set protocols ospfv3 area 4 range '2001:db60::/32'
# set protocols ospfv3 parameters router-id '192.0.2.10'
# set protocols ospfv3 redistribute 'bgp'


# Using rendered
#
#
- name: Render the commands for provided  configuration
  vyos.vyos.vyos_ospfv3:
    config:
      redistribute:
        - route_type: bgp
      parameters:
        router_id: 192.0.2.10
      areas:
        - area_id: '2'
          export_list: export1
          import_list: import1
          range:
            - address: '2001:db10::/32'
            - address: '2001:db20::/32'
            - address: '2001:db30::/32'
        - area_id: '3'
          range:
            - address: '2001:db40::/32'
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#        [
#       "set protocols ospfv3 redistribute bgp",
#       "set protocols ospfv3 parameters router-id '192.0.2.10'",
#       "set protocols ospfv3 area 2 range 2001:db10::/32",
#       "set protocols ospfv3 area 2 range 2001:db20::/32",
#       "set protocols ospfv3 area 2 range 2001:db30::/32",
#       "set protocols ospfv3 area '2'",
#       "set protocols ospfv3 area 2 export-list export1",
#       "set protocols ospfv3 area 2 import-list import1",
#       "set protocols ospfv3 area '3'",
#       "set protocols ospfv3 area 3 range 2001:db40::/32"
#    ]


# Using parsed
#
#
- name: Parse the commands to provide structured configuration.
  vyos.vyos.vyos_ospfv3:
    running_config:
      "set protocols ospfv3 area 2 export-list 'export1'
       set protocols ospfv3 area 2 import-list 'import1'
       set protocols ospfv3 area 2 range '2001:db10::/32'
       set protocols ospfv3 area 2 range '2001:db20::/32'
       set protocols ospfv3 area 2 range '2001:db30::/32'
       set protocols ospfv3 area 3 range '2001:db40::/32'
       set protocols ospfv3 parameters router-id '192.0.2.10'
       set protocols ospfv3 redistribute 'bgp'"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": {
#        "areas": [
#            {
#                "area_id": "2",
#                "export_list": "export1",
#                "import_list": "import1",
#                "range": [
#                    {
#                        "address": "2001:db10::/32"
#                    },
#                    {
#                        "address": "2001:db20::/32"
#                    },
#                    {
#                        "address": "2001:db30::/32"
#                    }
#                ]
#            },
#            {
#                "area_id": "3",
#                "range": [
#                    {
#                        "address": "2001:db40::/32"
#                    }
#                ]
#            }
#        ],
#        "parameters": {
#            "router_id": "192.0.2.10"
#        },
#        "redistribute": [
#            {
#                "route_type": "bgp"
#            }
#        ]
#    }


# Using gathered
#
# Before state:
# -------------
#
# vyos@192# run show configuration commands | grep ospfv3
# set protocols ospfv3 area 2 export-list 'export1'
# set protocols ospfv3 area 2 import-list 'import1'
# set protocols ospfv3 area 2 range '2001:db10::/32'
# set protocols ospfv3 area 2 range '2001:db20::/32'
# set protocols ospfv3 area 2 range '2001:db30::/32'
# set protocols ospfv3 area 3 range '2001:db40::/32'
# set protocols ospfv3 parameters router-id '192.0.2.10'
# set protocols ospfv3 redistribute 'bgp'
#
- name: Gather ospfv3 routes config with provided configurations
  vyos.vyos.vyos_ospfv3:
    config:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": {
#        "areas": [
#            {
#                "area_id": "2",
#                "export_list": "export1",
#                "import_list": "import1",
#                "range": [
#                    {
#                        "address": "2001:db10::/32"
#                    },
#                    {
#                        "address": "2001:db20::/32"
#                    },
#                    {
#                        "address": "2001:db30::/32"
#                    }
#                ]
#            },
#            {
#                "area_id": "3",
#                "range": [
#                    {
#                        "address": "2001:db40::/32"
#                    }
#                ]
#            }
#        ],
#        "parameters": {
#            "router_id": "192.0.2.10"
#        },
#        "redistribute": [
#            {
#                "route_type": "bgp"
#            }
#        ]
#    }
#
# After state:
# -------------
#
# vyos@192# run show configuration commands | grep ospfv3
# set protocols ospfv3 area 2 export-list 'export1'
# set protocols ospfv3 area 2 import-list 'import1'
# set protocols ospfv3 area 2 range '2001:db10::/32'
# set protocols ospfv3 area 2 range '2001:db20::/32'
# set protocols ospfv3 area 2 range '2001:db30::/32'
# set protocols ospfv3 area 3 range '2001:db40::/32'
# set protocols ospfv3 parameters router-id '192.0.2.10'
# set protocols ospfv3 redistribute 'bgp'


# Using deleted
#
# Before state
# -------------
#
# vyos@192# run show configuration commands | grep ospfv3
# set protocols ospfv3 area 2 export-list 'export1'
# set protocols ospfv3 area 2 import-list 'import1'
# set protocols ospfv3 area 2 range '2001:db10::/32'
# set protocols ospfv3 area 2 range '2001:db20::/32'
# set protocols ospfv3 area 2 range '2001:db30::/32'
# set protocols ospfv3 area 3 range '2001:db40::/32'
# set protocols ospfv3 parameters router-id '192.0.2.10'
# set protocols ospfv3 redistribute 'bgp'
#
- name: Delete attributes of ospfv3 routes.
  vyos.vyos.vyos_ospfv3:
    config:
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
#    "before": {
#        "areas": [
#            {
#                "area_id": "2",
#                "export_list": "export1",
#                "import_list": "import1",
#                "range": [
#                    {
#                        "address": "2001:db10::/32"
#                    },
#                    {
#                        "address": "2001:db20::/32"
#                    },
#                    {
#                        "address": "2001:db30::/32"
#                    }
#                ]
#            },
#            {
#                "area_id": "3",
#                "range": [
#                    {
#                        "address": "2001:db40::/32"
#                    }
#                ]
#            }
#        ],
#        "parameters": {
#            "router_id": "192.0.2.10"
#        },
#        "redistribute": [
#            {
#                "route_type": "bgp"
#            }
#        ]
#    }
# "commands": [
#        "delete protocols ospfv3"
#    ]
#
# "after": {}
# After state
# ------------
# vyos@192# run show configuration commands | grep ospfv3

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
before dictionary	The configuration prior to the model invocation. Returned: always Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["set protocols ospf parameters router-id 192.0.1.1", "set protocols ospfv3 area 2 range '2001:db10::/32'"]`

Authors

Rohit Thakur (@rohitthakur2590)

vyos.vyos.vyos_ospfv3 module – OSPFV3 resource module

Synopsis

Parameters

Notes

Examples

Return Values