junipernetworks.junos.junos_lldp_interfaces module – LLDP interfaces resource module

Note

This module is part of the junipernetworks.junos collection (version 8.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_lldp_interfaces.

New in junipernetworks.junos 1.0.0

Synopsis 

This module manages link layer discovery protocol (LLDP) attributes of interfaces on Juniper JUNOS devices.

Aliases: lldp_interfaces

Parameters 

Parameter	Comments
config list / elements=dictionary	The list of link layer discovery protocol interface attribute configurations
enabled boolean	This is a boolean value to control disabling of LLDP on the interface `name` Choices: `false` `true`
name string / required	Name of the interface LLDP needs to be configured on.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show protocols lldp. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result
state string	The state of the configuration after module completion. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"gathered"` `"rendered"` `"parsed"`

Examples 

# Using merged
# Before state:
# -------------
# user@junos01# # show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;

- name: Merge provided configuration with device configuration
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/2
        enabled: false
    state: merged

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }

# Using replaced
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }

- name: Replace provided configuration with device configuration
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/2
        disable: false
      - name: ge-0/0/3
        enabled: false
    state: replaced

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2;
# interface ge-0/0/3 {
#     disable;
# }

# Using overridden
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }

- name: Override provided configuration with device configuration
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/2
        enabled: false
    state: overridden

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/2 {
#     disable;
# }

# Using deleted
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/1;
# interface ge-0/0/2;
# interface ge-0/0/3 {
#     disable;
# }
- name: Delete lldp interface configuration (this will not delete other lldp configuration)
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/3
    state: deleted

# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# interface ge-0/0/2;
# interface ge-0/0/1;
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }
- name: Gather junos lldp interfaces as in given arguments
  junipernetworks.junos.junos_lldp_interfaces:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "name": "ge-0/0/1"
#         },
#         {
#             "enabled": false,
#             "name": "ge-0/0/2"
#         }
#     ]
# After state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# interface ge-0/0/1;
# interface ge-0/0/2 {
#     disable;
# }
# Using rendered
- name: Render platform specific xml from task input using rendered state
  junipernetworks.junos.junos_lldp_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/2
        enabled: false
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:protocols
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:lldp>
#         <nc:interface>
#             <nc:name>ge-0/0/1</nc:name>
#             <nc:disable delete="delete"/>
#         </nc:interface>
#         <nc:interface>
#             <nc:name>ge-0/0/2</nc:name>
#             <nc:disable/>
#         </nc:interface>
#     </nc:lldp>
# </nc:protocols>"
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <protocols>
#             <ospf>
#                 <area>
#                     <name>0.0.0.0</name>
#                     <interface>
#                         <name>ge-0/0/0.0</name>
#                     </interface>
#                 </area>
#             </ospf>
#             <lldp>
#                 <interface>
#                     <name>ge-0/0/1</name>
#                 </interface>
#                 <interface>
#                     <name>ge-0/0/2</name>
#                     <disable/>
#                 </interface>
#             </lldp>
#         </protocols>
#     </configuration>
# </rpc-reply>
# - name: Convert lldp interfaces config to argspec without connecting to the appliance
#   junipernetworks.junos.junos_lldp_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#         {
#             "name": "ge-0/0/1"
#         },
#         {
#             "enabled": false,
#             "name": "ge-0/0/2"
#         }
#     ]

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The configuration as structured data after module completion. Returned: when changed Sample: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
before list / elements=string	The configuration as structured data prior to module invocation. Returned: always Sample: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["<nc:protocols xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"> <nc:lldp> <nc:interface> <nc:name>ge-0/0/1</nc:name> <nc:disable delete=\"delete\"/> </nc:interface> <nc:interface> <nc:name>ge-0/0/2</nc:name> <nc:disable/> </nc:interface> </nc:lldp> </nc:protocols>", "xml 2", "xml 3"]`

Authors

Ganesh Nalawade (@ganeshrn)

junipernetworks.junos.junos_lldp_interfaces module – LLDP interfaces resource module

Synopsis

Parameters

Examples

Return Values

Authors

Collection links

Synopsis 

Parameters 

Examples 

Return Values 