New in version 2.6.
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| aggregate |
List of L3 interfaces definitions. Each of the entry in aggregate list should define name of interface
name and a optional ipv4 or ipv6 address. |
|
| ipv4 |
IPv4 address to be set for the L3 interface mentioned in name option. The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24
|
|
| ipv6 |
IPv6 address to be set for the L3 interface mentioned in name option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64
|
|
| name |
Name of the L3 interface to be configured eg. Ethernet 0/2
|
|
| state |
|
State of the L3 interface configuration. It indicates if the configuration should be present or absent on remote device.
|
- name: Remove Ethernet 0/3 IPv4 and IPv6 address
slxos_l3_interface:
name: Ethernet 0/3
state: absent
- name: Set Ethernet 0/3 IPv4 address
slxos_l3_interface:
name: Ethernet 0/3
ipv4: 192.168.0.1/24
- name: Set Ethernet 0/3 IPv6 address
slxos_l3_interface:
name: Ethernet 0/3
ipv6: "fd5d:12c9:2201:1::1/64"
- name: Set IP addresses on aggregate
slxos_l3_interface:
aggregate:
- { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
- { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
- name: Remove IP addresses on aggregate
slxos_l3_interface:
aggregate:
- { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
- { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
state: absent
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
|
commands
list
|
always, except for the platforms that use Netconf transport to manage the device. |
The list of configuration mode commands to send to the device
Sample:
['interface Ethernet 0/2', 'ip address 192.168.0.1/24', 'ipv6 address fd5d:12c9:2201:1::1/64']
|
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
This module is flagged as network which means that it is maintained by the Ansible Network Team. See Module Maintenance & Support for more info.
For a list of other modules that are also maintained by the Ansible Network Team, see here.
For more information about Red Hat’s support of this module, please refer to this Knowledge Base article
Hint
If you notice any issues in this documentation you can edit this document to improve it.