Tower can be installed in various ways by choosing the best mode for your environment and making any necessary modifications to the inventory file. For OpenShift-based deployments, refer to OpenShift Deployment and Configuration.
Tower can be installed using one of the following scenarios:
1). Tower will not configure replication or failover for the database that it uses, although Tower should work with any replication that you have. 2). The database server should be on the same network or in the same datacenter as the Tower server for performance reasons.
High Availability Multi-Machine Cluster:
Tower can be installed in a high availability cluster mode. In this mode, multiple Tower nodes are installed and active. Any node can receive HTTP requests and all nodes can execute jobs.
Running in a cluster setup requires any database that Tower uses to be external–Postgres must be installed on a machine that is not one of the primary or secondary tower nodes. When in a redundant setup, the remote Postgres version requirements is PostgreSQL 9.6.
As you edit your inventory file, there are a few things you must keep in mind:
The contents of the inventory file should be defined in
./inventory, next to the
./setup.sh installer playbook.
For installations and upgrades: If you need to make use of external databases, you must ensure the database sections of your inventory file are properly setup. Edit this file and add your external database information before running the setup script.
For upgrading an existing cluster: When upgrading a cluster, you may decide that you want to also reconfigure your cluster to omit existing instances or instance groups. Omitting the instance or the instance group from the inventory file will not be enough to remove them from the cluster. In addition to omitting instances or instance groups from the inventory file, you must also deprovision instances or instance groups before starting the upgrade. Otherwise, omitted instances or instance groups will continue to communicate with the cluster, which can cause issues with tower services during the upgrade.
For clustered installations: If you are creating a clustered setup, you must replace
localhost with the hostname or IP address of all instances. All nodes/instances must be able to reach any others using this hostname or address. In other words, you cannot use the
localhost ansible_connection=local on one of the nodes AND all of the nodes should use the same format for the host names.
Therefore, this will not work:
[tower] localhost ansible_connection=local hostA hostB.example.com 172.27.0.4
Instead, use these formats:
[tower] hostA hostB hostC
hostA.example.com hostB.example.com hostC.example.com
[tower] 172.27.0.2 172.27.0.3 172.27.0.4
For all standard installations: When performing an installation, you must supply any necessary passwords in the inventory file.
Changes made to the installation process now require that you fill out the all of the password fields in the inventory file. If you need to know where to find the values for these they should be:
admin_password=''<— Tower local admin password
pg_password=''<—- Found in /etc/tower/conf.d/postgres.py
rabbitmq_password=''<—- create a new password here (alpha-numeric with no special characters)
Example Inventory file
Example Single Node Inventory File
[tower] localhost ansible_connection=local [database] [all:vars] admin_password='password' pg_host='' pg_port='' pg_database='awx' pg_username='awx' pg_password='password' rabbitmq_port=5672 rabbitmq_vhost=tower rabbitmq_username=tower rabbitmq_password='password' rabbitmq_cookie=rabbitmqcookie # Needs to be true for fqdns and ip addresses rabbitmq_use_long_name=false # Needs to remain false if you are using localhost
Example Multi Node Cluster Inventory File
[tower] clusternode1.example.com clusternode2.example.com clusternode3.example.com [database] dbnode.example.com [all:vars] ansible_become=true admin_password='password' pg_host='dbnode.example.com' pg_port='5432' pg_database='tower' pg_username='tower' pg_password='password' rabbitmq_port=5672 rabbitmq_vhost=tower rabbitmq_username=tower rabbitmq_password=tower rabbitmq_cookie=rabbitmqcookie # Needs to be true for fqdns and ip addresses rabbitmq_use_long_name=true
Example Inventory file for an external existing database
[tower] node.example.com ansible_connection=local [database] [all:vars] admin_password='password' pg_password='password' rabbitmq_password='password' pg_host='database.example.com' pg_port='5432' pg_database='awx' pg_username='awx'
Example Inventory file for external database which needs installation
[tower] node.example.com ansible_connection=local [database] database.example.com [all:vars] admin_password='password' pg_password='password' rabbitmq_password='password' pg_host='database.example.com' pg_port='5432' pg_database='awx' pg_username='awx'
Once any necessary changes have been made, you are ready to run
Root access to the remote machines is required. With Ansible, this can be achieved in different ways:
- ansible_user=root ansible_ssh_password=”your_password_here” inventory host or group variables
- ansible_user=root ansible_ssh_private_key_file=”path_to_your_keyfile.pem” inventory host or group variables
- ANSIBLE_BECOME_METHOD=’sudo’ ANSIBLE_BECOME=True ./setup.sh
- ANSIBLE_SUDO=True ./setup.sh (Only applies to Ansible 2.7)
DEFAULT_SUDO Ansible configuration parameter was removed in Ansible 2.8, which causes the
ANSIBLE_SUDO=True ./setup.sh method of privilege escalation to no longer work. For more information on
become plugins, refer to Understanding Privilege Escalation and the list of become plugins.
Ansible Tower 3.0 simplifies installation and removes the need to run
./configure/ as part of the installation setup. Users of older versions should follow the instructions available in the v.2.4.5 (or earlier) releases of the Tower Documentation available at:
The Tower setup playbook script uses the
inventory file and is invoked as
./setup.sh from the path where you unpacked the Tower installer tarball.
[email protected]:~$ ./setup.sh
The setup script takes the following arguments:
-h– Show this help message and exit
-i INVENTORY_FILE– Path to Ansible inventory file (default:
-e EXTRA_VARS– Set additional Ansible variables as key=value or YAML/JSON (i.e.
-e bundle_install=falseforces an online installation)
-b– Perform a database backup in lieu of installing
-r– Perform a database restore in lieu of installing (a default restore path is used unless EXTRA_VARS are provided with a non-default path, as shown in the code example below)
./setup.sh -e 'restore_backup_file=/path/to/nondefault/location' -r
Please note that a issue was discovered in Tower 3.0.0 and 3.0.1 that prevented proper system backups and restorations.
If you need to back up or restore your Tower v3.0.0 or v3.0.1 installation, use the v3.0.2 installer to do so.
./setup.sh with the appropriate parameters, Tower is installed on the appropriate machines as has been configured. Setup installs Tower from RPM or Deb packages using repositories hosted on ansible.com.
Once setup is complete, use your web browser to access the Tower server and view the Tower login screen. Your Tower server is accessible from port 80 (http://tower.company.com/) but will redirect to port 443 so 443 needs to be available also.
If the installation of Tower fails and you are a customer who has purchased a valid license for Ansible Tower, please contact Ansible via the Red Hat Customer portal at https://access.redhat.com/.
Once installed, if you log into the Tower instance via SSH, the default admin password is provided in the prompt. You can then change it with the following command (as root or as AWX user):
awx-manage changepassword admin
After that, the password you have entered will work as the admin password in the web UI.