amazon.aws.ec2_transit_gateway module – Create and delete AWS Transit Gateways
Note
This module is part of the amazon.aws collection (version 9.0.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install amazon.aws.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: amazon.aws.ec2_transit_gateway.
New in community.aws 1.0.0
Synopsis
Creates AWS Transit Gateways.
Deletes AWS Transit Gateways.
Updates tags on existing transit gateways.
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.6
boto3 >= 1.28.0
botocore >= 1.31.0
Parameters
Parameter |
Comments |
|---|---|
AWS access key ID. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The aws_access_key and profile options are mutually exclusive. The aws_access_key_id alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_access_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
A private Autonomous System Number (ASN) for the Amazon side of a BGP session. The range is 64512 to 65534 for 16-bit ASNs and 4200000000 to 4294967294 for 32-bit ASNs. |
|
Enable or disable automatic association with the default association route table. Choices:
|
|
Enable or disable automatic acceptance of attachment requests. Choices:
|
|
Enable or disable automatic propagation of routes to the default propagation route table. Choices:
|
|
The location of a CA Bundle to use when validating SSL certificates. The |
|
A dictionary to modify the botocore configuration. Parameters can be found in the AWS documentation https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. |
|
Use a The Choices:
|
|
The description of the transit gateway. |
|
Whether to enable AWS DNS support. Choices:
|
|
URL to connect to instead of the default AWS endpoints. While this can be used to connection to other AWS-compatible services the amazon.aws and community.aws collections are only tested against AWS. The The ec2_url and s3_url aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
Whether to enable AWS Multicast support. Valid only at the time of creation of the Transit Gateway. Choices:
|
|
A named AWS profile to use for authentication. See the AWS documentation for more information about named profiles https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html. The The profile option is mutually exclusive with the aws_access_key, aws_secret_key and security_token options. |
|
If If the Tag keys beginning with Choices:
|
|
The AWS region to use. For global services such as IAM, Route53 and CloudFront, region is ignored. The See the Amazon AWS documentation for more information http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region. The Support for the |
|
AWS secret access key. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The secret_key and profile options are mutually exclusive. The aws_secret_access_key alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_secret_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
AWS STS session token for use with temporary credentials. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The security_token and profile options are mutually exclusive. Aliases aws_session_token and session_token were added in release 3.2.0, with the parameter being renamed from security_token to session_token in release 6.0.0. The security_token, aws_security_token, and access_token aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
Choices:
|
|
A dictionary representing the tags to be applied to the resource. If the |
|
The ID of the transit gateway. |
|
When set to Setting validate_certs=false is strongly discouraged, as an alternative, consider setting aws_ca_bundle instead. Choices:
|
|
Enable or disable Equal Cost Multipath Protocol support. Choices:
|
|
Whether to wait for status. Choices:
|
|
Number of seconds to wait for status. Default: |
Notes
Note
Caution: For modules, environment variables and configuration files are read from the Ansible ‘host’ context and not the ‘controller’ context. As such, files may need to be explicitly copied to the ‘host’. For lookup and connection plugins, environment variables and configuration files are read from the Ansible ‘controller’ context and not the ‘host’ context.
The AWS SDK (boto3) that Ansible uses may also read defaults for credentials and other settings, such as the region, from its configuration files in the Ansible ‘host’ context (typically
~/.aws/credentials). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.
Examples
- name: Create a new transit gateway using defaults
amazon.aws.ec2_transit_gateway:
state: present
region: us-east-1
description: personal-testing
register: created_tgw
- name: Create a new transit gateway with options
amazon.aws.ec2_transit_gateway:
asn: 64514
auto_associate: false
auto_propagate: false
multicast_support: true
dns_support: true
description: "nonprod transit gateway"
purge_tags: false
state: present
region: us-east-1
tags:
Name: nonprod transit gateway
status: testing
- name: Remove a transit gateway by description
amazon.aws.ec2_transit_gateway:
state: absent
region: us-east-1
description: personal-testing
- name: Remove a transit gateway by id
amazon.aws.ec2_transit_gateway:
state: absent
region: ap-southeast-2
transit_gateway_id: tgw-3a9aa123
register: deleted_tgw
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The attributes of the transit gateway. Returned: state=present |
|
The creation time of the transit gateway. Returned: always Sample: |
|
The description of the transit gateway. Returned: always Sample: |
|
The options attributes of the transit gateway. Returned: always |
|
A private Autonomous System Number (ASN) for the Amazon side of a BGP session. The range is 64512 to 65534 for 16-bit ASNs and 4200000000 to 4294967294 for 32-bit ASNs. Returned: always Sample: |
|
The ID of the default association route table. Returned: Iwhen exists Sample: |
|
Indicates whether attachment requests are automatically accepted. Returned: always Sample: |
|
Indicates whether resource attachments are automatically associated with the default association route table. Returned: always Sample: |
|
Indicates whether resource attachments automatically propagate routes to the default propagation route table. Returned: always Sample: |
|
Indicates whether DNS support is enabled. Returned: always Sample: |
|
Indicates whether Multicast support is enabled. Returned: always Sample: |
|
The ID of the default propagation route table. Returned: when exists Sample: |
|
Indicates whether Equal Cost Multipath Protocol support is enabled. Returned: always Sample: |
|
The account that owns the transit gateway. Returned: always Sample: |
|
The state of the transit gateway. Returned: always Sample: |
|
A dictionary of resource tags. Returned: always Sample: |
|
The ID of the transit_gateway. Returned: always Sample: |
|
The ID of the transit_gateway. Returned: always Sample: |