cisco.dnac.assurance_events_count_info module – Information module for Assurance Events Count Info

Note

This module is part of the cisco.dnac collection (version 6.25.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.assurance_events_count_info.

New in cisco.dnac 6.15.0

Synopsis

  • This module represents an alias of the module assurance_events_count_v1_info

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • dnacentersdk >= 2.4.9

  • python >= 3.5

Parameters

Parameter

Comments

apMac

string

ApMac query parameter. MAC address of the access point. This parameter is applicable for `Unified AP` and `Wireless Client` events. This field supports wildcard (`*`) character-based search. Ex `*50 0F*` or `50 0F*` or `*50 0F` Examples `apMac=50 0F 80 0F F7 E0` (single apMac requested) `apMac=50 0F 80 0F F7 E0&apMac=18 80 90 AB 7E A0` (multiple apMac requested).

clientMac

string

ClientMac query parameter. MAC address of the client. This parameter is applicable for `Wired Client` and `Wireless Client` events. This field supports wildcard (`*`) character-based search. Ex `*66 2B*` or `66 2B*` or `*66 2B` Examples `clientMac=66 2B B8 D2 01 56` (single clientMac requested) `clientMac=66 2B B8 D2 01 56&clientMac=DC A6 32 F5 5A 89` (multiple clientMac requested).

deviceFamily

string

DeviceFamily query parameter. Device family. Please note that multiple families across network device type and client type is not allowed. For example, choosing `Routers` along with `Wireless Client` or `Unified AP` is not supported. Examples `deviceFamily=Switches and Hubs` (single deviceFamily requested) `deviceFamily=Switches and Hubs&deviceFamily=Routers` (multiple deviceFamily requested).

dnac_debug

boolean

Flag for Cisco DNA Center SDK to enable debugging.

Choices:

  • false ← (default)

  • true

dnac_host

string / required

The Cisco DNA Center hostname.

dnac_password

string

The Cisco DNA Center password to authenticate.

dnac_port

integer

The Cisco DNA Center port.

Default: 443

dnac_username

aliases: user

string

The Cisco DNA Center username to authenticate.

Default: "admin"

dnac_verify

boolean

Flag to enable or disable SSL certificate verification.

Choices:

  • false

  • true ← (default)

dnac_version

string

Informs the SDK which version of Cisco DNA Center to use.

Default: "2.3.7.6"

endTime

string

EndTime query parameter. End time to which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. If `endTime` is not provided, API will default to current time.

headers

dictionary

Additional headers.

messageType

string

MessageType query parameter. Message type for the event. Examples `messageType=Syslog` (single messageType requested) `messageType=Trap&messageType=Syslog` (multiple messageType requested).

networkDeviceId

string

NetworkDeviceId query parameter. The list of Network Device Uuids. (Ex. `6bef213c-19ca-4170-8375-b694e251101c`) Examples `networkDeviceId=6bef213c-19ca-4170-8375-b694e251101c` (single networkDeviceId requested) `networkDeviceId=6bef213c-19ca-4170-8375- b694e251101c&networkDeviceId=32219612-819e-4b5e-a96b-cf22aca13dd9&networkDeviceId=2541e9a7-b80d-4955-8aa2- 79b233318ba0` (multiple networkDeviceId requested).

networkDeviceName

string

NetworkDeviceName query parameter. Network device name. This parameter is applicable for network device related families. This field supports wildcard (`*`) character-based search. Ex `*Branch*` or `Branch*` or `*Branch` Examples `networkDeviceName=Branch-3-Gateway` (single networkDeviceName requested) `networkDeviceName=Branch-3-Gateway&networkDeviceName=Branch-3-Switch` (multiple networkDeviceName requested).

severity

string

Severity query parameter. Severity of the event between 0 and 6. This is applicable only for events related to network devices (other than AP) and `Wired Client` events. | Value | Severity | | —– | ———– | | 0 | Emergency | | 1 | Alert | | 2 | Critical | | 3 | Error | | 4 | Warning | | 5 | Notice | | 6 | Info | Examples `severity=0` (single severity requested) `severity=0&severity=1` (multiple severity requested).

siteHierarchyId

string

SiteHierarchyId query parameter. The full hierarchy breakdown of the site tree in id form starting from Global site UUID and ending with the specific site UUID. (Ex. `globalUuid/areaUuid/buildingUuid/floorUuid`) This field supports wildcard asterisk (`*`) character search support. E.g. `*uuid*, *uuid, uuid*` Examples `?siteHierarchyId=globalUuid/areaUuid/buildingUuid/floorUuid `(single siteHierarchyId requested) `?siteHiera rchyId=globalUuid/areaUuid/buildingUuid/floorUuid&siteHierarchyId=globalUuid/areaUuid2/buildingUuid2/floorUu id2` (multiple siteHierarchyId requested).

siteId

string

SiteId query parameter. The UUID of the site. (Ex. `flooruuid`) Examples `?siteId=id1` (single siteId requested) `?siteId=id1&siteId=id2&siteId=id3` (multiple siteId requested).

startTime

string

StartTime query parameter. Start time from which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. If `startTime` is not provided, API will default to current time minus 24 hours.

validate_response_schema

boolean

Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema.

Choices:

  • false

  • true ← (default)

Notes

Note

  • SDK Method used are devices.Devices.count_the_number_of_events_v1,

  • Paths used are get /dna/data/api/v1/assuranceEvents/count,

  • It should be noted that this module is an alias of assurance_events_count_v1_info

  • Supports check_mode

  • The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

  • The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

See Also

See also

Cisco DNA Center documentation for Devices CountTheNumberOfEventsV1

Complete reference of the CountTheNumberOfEventsV1 API.

Examples

- name: Get all Assurance Events Count Info
  cisco.dnac.assurance_events_count_info:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    headers: "{{my_headers | from_json}}"
    deviceFamily: string
    startTime: string
    endTime: string
    messageType: string
    severity: string
    siteId: string
    siteHierarchyId: string
    networkDeviceName: string
    networkDeviceId: string
    apMac: string
    clientMac: string
  register: result

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

dnac_response

dictionary

A dictionary or list with the response returned by the Cisco DNAC Python SDK

Returned: always

Sample: {"response": {"count": 0}, "version": "string"}

Authors

  • Rafael Campos (@racampos)