cisco.dnac.assurance_events_info module – Information module for Assurance Events Info
Note
This module is part of the cisco.dnac collection (version 6.25.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.dnac.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.dnac.assurance_events_info.
New in cisco.dnac 6.15.0
Synopsis
This module represents an alias of the module assurance_events_v1_info
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
dnacentersdk >= 2.4.9
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
ApMac query parameter. MAC address of the access point. This parameter is applicable for `Unified AP` and `Wireless Client` events. This field supports wildcard (`*`) character-based search. Ex `*50 0F*` or `50 0F*` or `*50 0F` Examples `apMac=50 0F 80 0F F7 E0` (single apMac requested) `apMac=50 0F 80 0F F7 E0&apMac=18 80 90 AB 7E A0` (multiple apMac requested). |
|
Attribute query parameter. The list of attributes that needs to be included in the response. If this parameter is not provided, then basic attributes (`id`, `name`, `timestamp`, `details`, `messageType`, `siteHierarchyId`, `siteHierarchy`, `deviceFamily`, `networkDeviceId`, `networkDeviceName`, `managementIpAddress`) would be part of the response. Examples `attribute=name` (single attribute requested) `attribute=name&attribute=networkDeviceName` (multiple attribute requested). |
|
ClientMac query parameter. MAC address of the client. This parameter is applicable for `Wired Client` and `Wireless Client` events. This field supports wildcard (`*`) character-based search. Ex `*66 2B*` or `66 2B*` or `*66 2B` Examples `clientMac=66 2B B8 D2 01 56` (single clientMac requested) `clientMac=66 2B B8 D2 01 56&clientMac=DC A6 32 F5 5A 89` (multiple clientMac requested). |
|
DeviceFamily query parameter. Device family. Please note that multiple families across network device type and client type is not allowed. For example, choosing `Routers` along with `Wireless Client` or `Unified AP` is not supported. Examples `deviceFamily=Switches and Hubs` (single deviceFamily requested) `deviceFamily=Switches and Hubs&deviceFamily=Routers` (multiple deviceFamily requested). |
|
Flag for Cisco DNA Center SDK to enable debugging. Choices:
|
|
The Cisco DNA Center hostname. |
|
The Cisco DNA Center password to authenticate. |
|
The Cisco DNA Center port. Default: |
|
The Cisco DNA Center username to authenticate. Default: |
|
Flag to enable or disable SSL certificate verification. Choices:
|
|
Informs the SDK which version of Cisco DNA Center to use. Default: |
|
EndTime query parameter. End time to which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. If `endTime` is not provided, API will default to current time. |
|
Additional headers. |
|
Id path parameter. Unique identifier for the event. |
|
Limit query parameter. Maximum number of records to return. |
|
MessageType query parameter. Message type for the event. Examples `messageType=Syslog` (single messageType requested) `messageType=Trap&messageType=Syslog` (multiple messageType requested). |
|
NetworkDeviceId query parameter. The list of Network Device Uuids. (Ex. `6bef213c-19ca-4170-8375-b694e251101c`) Examples `networkDeviceId=6bef213c-19ca-4170-8375-b694e251101c` (single networkDeviceId requested) `networkDeviceId=6bef213c-19ca-4170-8375- b694e251101c&networkDeviceId=32219612-819e-4b5e-a96b-cf22aca13dd9&networkDeviceId=2541e9a7-b80d-4955-8aa2- 79b233318ba0` (multiple networkDeviceId with & separator). |
|
NetworkDeviceName query parameter. Network device name. This parameter is applicable for network device related families. This field supports wildcard (`*`) character-based search. Ex `*Branch*` or `Branch*` or `*Branch` Examples `networkDeviceName=Branch-3-Gateway` (single networkDeviceName requested) `networkDeviceName=Branch-3-Gateway&networkDeviceName=Branch-3-Switch` (multiple networkDeviceName requested). |
|
Offset query parameter. Specifies the starting point within all records returned by the API. It’s one based offset. The starting value is 1. |
|
Order query parameter. The sort order of the field ascending or descending. |
|
Severity query parameter. Severity of the event between 0 and 6. This is applicable only for events related to network devices (other than AP) and `Wired Client` events. | Value | Severity | | —– | ———– | | 0 | Emergency | | 1 | Alert | | 2 | Critical | | 3 | Error | | 4 | Warning | | 5 | Notice | | 6 | Info | Examples `severity=0` (single severity requested) `severity=0&severity=1` (multiple severity requested). |
|
SiteHierarchyId query parameter. The full hierarchy breakdown of the site tree in id form starting from Global site UUID and ending with the specific site UUID. (Ex. `globalUuid/areaUuid/buildingUuid/floorUuid`) This field supports wildcard asterisk (`*`) character search support. E.g. `*uuid*, *uuid, uuid*` Examples `?siteHierarchyId=globalUuid/areaUuid/buildingUuid/floorUuid `(single siteHierarchyId requested) `?siteHiera rchyId=globalUuid/areaUuid/buildingUuid/floorUuid&siteHierarchyId=globalUuid/areaUuid2/buildingUuid2/floorUu id2` (multiple siteHierarchyId requested). |
|
SiteId query parameter. The UUID of the site. (Ex. `flooruuid`) Examples `?siteId=id1` (single siteId requested) `?siteId=id1&siteId=id2&siteId=id3` (multiple siteId requested). |
|
SortBy query parameter. A field within the response to sort by. |
|
StartTime query parameter. Start time from which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. If `startTime` is not provided, API will default to current time minus 24 hours. |
|
Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices:
|
|
View query parameter. The list of events views. Please refer to `EventViews` for the supported list Examples `view=network` (single view requested) `view=network&view=ap` (multiple view requested). |
Notes
Note
SDK Method used are devices.Devices.get_details_of_a_single_assurance_event_v1, devices.Devices.query_assurance_events_v1,
Paths used are get /dna/data/api/v1/assuranceEvents, get /dna/data/api/v1/assuranceEvents/{id},
It should be noted that this module is an alias of assurance_events_v1_info
Supports
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
See Also
See also
- Cisco DNA Center documentation for Devices GetDetailsOfASingleAssuranceEventV1
Complete reference of the GetDetailsOfASingleAssuranceEventV1 API.
- Cisco DNA Center documentation for Devices QueryAssuranceEventsV1
Complete reference of the QueryAssuranceEventsV1 API.
Examples
- name: Get all Assurance Events Info
cisco.dnac.assurance_events_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
deviceFamily: string
startTime: 0
endTime: 0
messageType: string
severity: 0
siteId: string
siteHierarchyId: string
networkDeviceName: string
networkDeviceId: string
apMac: string
clientMac: string
attribute: string
view: string
offset: 0
limit: 0
sortBy: string
order: string
register: result
- name: Get Assurance Events Info by id
cisco.dnac.assurance_events_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
attribute: string
view: string
id: string
register: result
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: |