inspur.sm.edit_ipv6 – Set ipv6 information.

Note

This plugin is part of the inspur.sm collection (version 1.3.0).

To install it use: ansible-galaxy collection install inspur.sm.

To use it in a playbook, specify: inspur.sm.edit_ipv6.

New in version 0.1.0: of inspur.sm

Synopsis

  • Set ipv6 information on Inspur server.

Parameters

Parameter Choices/Defaults Comments
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
interface_name
string / required
    Choices:
  • eth0
  • eth1
  • bond0
Set interface_name.
ipv6_address
string
If DHCP is disabled, specify a static IPv6 address to be configured for the selected interface.
Required when ipv6_dhcp_enable=static.
ipv6_dhcp_enable
string
    Choices:
  • dhcp
  • static
Enable 'Enable DHCP' to dynamically configure IPv6 address using Dynamic Host Configuration Protocol (DHCP).
ipv6_gateway
string
If DHCP is disabled, specify a static Default Gateway to be configured for the selected interface.
Required when ipv6_dhcp_enable=static.
ipv6_index
integer
Ipv6 index(0-15).
Required when ipv6_dhcp_enable=static.
ipv6_prefix
integer
The subnet prefix length for the IPv6 settings(0-128).
Required when ipv6_dhcp_enable=static.
ipv6_status
string
    Choices:
  • enable
  • disable
Enable or disable IPV6.
password
string
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
provider
dictionary
A dict object containing connection details.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
username
string
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
username
string
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

Examples

- name: Ipv6 test
  hosts: ism
  connection: local
  gather_facts: no
  vars:
    ism:
      host: "{{ ansible_ssh_host }}"
      username: "{{ username }}"
      password: "{{ password }}"

  tasks:

  - name: "Set ipv6 information"
    inspur.sm.edit_ipv6:
      interface_name: "eth0"
      ipv6_status: "disable"
      provider: "{{ ism }}"

  - name: "Set ipv6 information"
    inspur.sm.edit_ipv6:
      interface_name: "eth0"
      ipv6_status: "enable"
      ipv6_dhcp_enable: "dhcp"
      provider: "{{ ism }}"

  - name: "Set ipv6 information"
    inspur.sm.edit_ipv6:
      interface_name: "eth0"
      ipv6_status: "enable"
      ipv6_dhcp_enable: "static"
      ipv6_address: "::ffff:100:2:36:10"
      ipv6_index: 12
      ipv6_prefix: 16
      ipv6_gateway: "::"
      provider: "{{ ism }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
Check to see if a change was made on the device.

message
string
always
Messages returned after module execution.

state
string
always
Status after module execution.



Authors

  • WangBaoshan (@ISIB-group)