junipernetworks.junos.junos_lag_interfaces module – Link Aggregation Juniper JUNOS resource module
Note
This module is part of the junipernetworks.junos collection (version 9.1.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install junipernetworks.junos.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: junipernetworks.junos.junos_lag_interfaces.
New in junipernetworks.junos 1.0.0
Synopsis
This module manages properties of Link Aggregation Group on Juniper JUNOS devices.
Requirements
The below requirements are needed on the host that executes this module.
ncclient (>=v0.6.4)
Parameters
Parameter |
Comments |
|---|---|
A list of link aggregation group configurations. |
|
This boolean option indicates if link protection should be enabled for the LAG interface. If value is Choices:
|
|
List of member interfaces of the link aggregation group. The value can be single interface or list of interfaces. |
|
Specify the type of ethernet interface. Choices:
|
|
The value of this options configures the member link as either Choices:
|
|
Name of the member interface. |
|
LAG mode. A value of Choices:
|
|
Name of the link aggregation group (LAG). |
|
This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show interfaces. The state parsed reads the configuration from |
|
The state of the configuration after module completion Choices:
|
Notes
Note
This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 18.4R1.
This module works with connection
netconf. See the Junos OS Platform Options.
Examples
# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad ae0;
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# ether-options {
# 802.3ad ae0;
# }
# }
# ae0 {
# description "lag interface";
# }
# ae1 {
# description "lag interface 1";
# }
- name: "Delete LAG attributes of given interfaces (Note: This won't delete the interface itself)"
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae0
- name: ae1
state: deleted
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# }
# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# }
- name: Merge provided configuration with device configuration
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae0
members:
- member: ge-0/0/1
link_type: primary
- member: ge-0/0/2
link_type: backup
state: merged
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad {
# ae0;
# primary;
# }
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# ether-options {
# 802.3ad {
# ae0;
# backup;
# }
# }
# }
# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad ae0;
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# ether-options {
# 802.3ad ae0;
# }
# }
# ae0 {
# description "lag interface";
# }
# ae3 {
# description "lag interface 3";
# }
- name: Overrides all device LAG configuration with provided configuration
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae0
members:
- member: ge-0/0/2
- name: ae1
members:
- member: ge-0/0/1
mode: passive
state: overridden
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# ether-options {
# 802.3ad ae0;
# }
# }
# ae0 {
# description "lag interface";
# }
# ae1 {
# aggregated-ether-options {
# lacp {
# active;
# }
# }
# }
# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# }
# ge-0/0/3 {
# description "Ansible configured interface 3";
# }
- name: Replace device LAG configuration with provided configuration
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae0
members:
- member: ge-0/0/1
mode: active
state: replaced
# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
# description "Ansible configured interface 1";
# ether-options {
# 802.3ad ae0;
# }
# }
# ge-0/0/2 {
# description "Ansible configured interface 2";
# }
# ae0 {
# aggregated-ether-options {
# lacp {
# active;
# }
# }
# }
# ge-0/0/3 {
# description "Ansible configured interface 3";
# }
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/2 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# ae2;
# primary;
# }
# }
# }
# ge-0/0/4 {
# ether-options {
# 802.3ad {
# ae2;
# backup;
# }
# }
# }
# ge-1/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.1/24;
# address 10.200.16.20/24;
# }
# family inet6;
# }
# }
# ge-2/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.2/24;
# address 10.200.16.21/24;
# }
# family inet6;
# }
# }
# ge-3/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.3/24;
# address 10.200.16.22/24;
# }
# family inet6;
# }
# }
# ae1 {
# description "Configured by Ansible";
# aggregated-ether-options {
# lacp {
# active;
# }
# }
# }
# ae2 {
# description "Configured by Ansible";
# aggregated-ether-options {
# link-protection;
# lacp {
# passive;
# }
# }
# }
# em1 {
# description TEST;
# }
# fxp0 {
# description ANSIBLE;
# speed 1g;
# link-mode automatic;
# unit 0 {
# family inet {
# address 10.8.38.38/24;
# }
# }
# }
- name: Gather junos lag interfaces as in given arguments
junipernetworks.junos.junos_lag_interfaces:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
# {
# "members": [
# {
# "member": "ge-0/0/1"
# },
# {
# "member": "ge-0/0/2"
# }
# ],
# "mode": "active",
# "name": "ae1"
# },
# {
# "link_protection": true,
# "members": [
# {
# "link_type": "primary",
# "member": "ge-0/0/3"
# },
# {
# "link_type": "backup",
# "member": "ge-0/0/4"
# }
# ],
# "mode": "passive",
# "name": "ae2"
# }
# ]
# After state:
# ------------
#
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/2 {
# ether-options {
# 802.3ad ae1;
# }
# }
# ge-0/0/3 {
# ether-options {
# 802.3ad {
# ae2;
# primary;
# }
# }
# }
# ge-0/0/4 {
# ether-options {
# 802.3ad {
# ae2;
# backup;
# }
# }
# }
# ge-1/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.1/24;
# address 10.200.16.20/24;
# }
# family inet6;
# }
# }
# ge-2/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.2/24;
# address 10.200.16.21/24;
# }
# family inet6;
# }
# }
# ge-3/0/0 {
# unit 0 {
# family inet {
# address 192.168.100.3/24;
# address 10.200.16.22/24;
# }
# family inet6;
# }
# }
# ae1 {
# description "Configured by Ansible";
# aggregated-ether-options {
# lacp {
# active;
# }
# }
# }
# ae2 {
# description "Configured by Ansible";
# aggregated-ether-options {
# link-protection;
# lacp {
# passive;
# }
# }
# }
# em1 {
# description TEST;
# }
# fxp0 {
# description ANSIBLE;
# speed 1g;
# link-mode automatic;
# unit 0 {
# family inet {
# address 10.8.38.38/24;
# }
# }
# }
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <interfaces>
# <interface>
# <name>ge-0/0/1</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae1</bundle>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-0/0/2</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae1</bundle>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-0/0/3</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae2</bundle>
# <primary/>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-0/0/4</name>
# <ether-options>
# <ieee-802.3ad>
# <bundle>ae2</bundle>
# <backup/>
# </ieee-802.3ad>
# </ether-options>
# </interface>
# <interface>
# <name>ge-1/0/0</name>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>192.168.100.1/24</name>
# </address>
# <address>
# <name>10.200.16.20/24</name>
# </address>
# </inet>
# <inet6>
# </inet6>
# </family>
# </unit>
# </interface>
# <interface>
# <name>ge-2/0/0</name>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>192.168.100.2/24</name>
# </address>
# <address>
# <name>10.200.16.21/24</name>
# </address>
# </inet>
# <inet6>
# </inet6>
# </family>
# </unit>
# </interface>
# <interface>
# <name>ge-3/0/0</name>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>192.168.100.3/24</name>
# </address>
# <address>
# <name>10.200.16.22/24</name>
# </address>
# </inet>
# <inet6>
# </inet6>
# </family>
# </unit>
# </interface>
# <interface>
# <name>ae1</name>
# <description>Configured by Ansible</description>
# <aggregated-ether-options>
# <lacp>
# <active/>
# </lacp>
# </aggregated-ether-options>
# </interface>
# <interface>
# <name>ae2</name>
# <description>Configured by Ansible</description>
# <aggregated-ether-options>
# <link-protection>
# </link-protection>
# <lacp>
# <passive/>
# </lacp>
# </aggregated-ether-options>
# </interface>
# <interface>
# <name>em1</name>
# <description>TEST</description>
# </interface>
# <interface>
# <name>fxp0</name>
# <description>ANSIBLE</description>
# <speed>1g</speed>
# <link-mode>automatic</link-mode>
# <unit>
# <name>0</name>
# <family>
# <inet>
# <address>
# <name>10.8.38.38/24</name>
# </address>
# </inet>
# </family>
# </unit>
# </interface>
# </interfaces>
# </configuration>
# </rpc-reply>
# - name: Convert interfaces config to argspec without connecting to the appliance
# junipernetworks.junos.junos_lag_interfaces:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
# {
# "members": [
# {
# "member": "ge-0/0/1"
# },
# {
# "member": "ge-0/0/2"
# }
# ],
# "mode": "active",
# "name": "ae1"
# },
# {
# "link_protection": true,
# "members": [
# {
# "link_type": "primary",
# "member": "ge-0/0/3"
# },
# {
# "link_type": "backup",
# "member": "ge-0/0/4"
# }
# ],
# "mode": "passive",
# "name": "ae2"
# }
# ]
# Using rendered
- name: Render platform specific xml from task input using rendered state
junipernetworks.junos.junos_lag_interfaces:
config:
- name: ae1
members:
- member: ge-0/0/1
- member: ge-0/0/2
mode: active
- name: ae2
link_protection: true
members:
- member: ge-0/0/3
link_type: primary
- member: ge-0/0/4
link_type: backup
mode: passive
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:interfaces
# xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:interface>
# <nc:name>ae1</nc:name>
# <nc:aggregated-ether-options>
# <nc:lacp>
# <nc:active/>
# </nc:lacp>
# </nc:aggregated-ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ge-0/0/1</nc:name>
# <nc:ether-options>
# <nc:ieee-802.3ad>
# <nc:bundle>ae1</nc:bundle>
# </nc:ieee-802.3ad>
# </nc:ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ge-0/0/2</nc:name>
# <nc:ether-options>
# <nc:ieee-802.3ad>
# <nc:bundle>ae1</nc:bundle>
# </nc:ieee-802.3ad>
# </nc:ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ae2</nc:name>
# <nc:aggregated-ether-options>
# <nc:lacp>
# <nc:passive/>
# </nc:lacp>
# <nc:link-protection/>
# </nc:aggregated-ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ge-0/0/3</nc:name>
# <nc:ether-options>
# <nc:ieee-802.3ad>
# <nc:bundle>ae2</nc:bundle>
# <nc:primary/>
# </nc:ieee-802.3ad>
# </nc:ether-options>
# </nc:interface>
# <nc:interface>
# <nc:name>ge-0/0/4</nc:name>
# <nc:ether-options>
# <nc:ieee-802.3ad>
# <nc:bundle>ae2</nc:bundle>
# <nc:backup/>
# </nc:ieee-802.3ad>
# </nc:ether-options>
# </nc:interface>
# </nc:interfaces>"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The configuration as structured data after module completion. Returned: when changed Sample: |
|
The configuration as structured data prior to module invocation. Returned: always Sample: |
|
The set of xml rpc payload pushed to the remote device. Returned: always Sample: |